[Tue Feb 14 15:33:31 2012] Detection parameters:
  Position = (133.8, 327.4) = 5 35 33.62 -6 18 23.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.0 +/- 11.0
  Background counts = 19.8
  Rate = 0.001 +/- 0.0002

[Tue Feb 14 15:33:32 2012] Off-axis axis estimate = 12.12'
[Tue Feb 14 20:10:32 2012] Using EEF radius (= 12.49 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 20:10:32 2012] Initial guess for spatial extent in simple fitting = 12.49"
[Tue Feb 14 20:10:32 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.078
[Tue Feb 14 20:10:32 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 12.49"
[Tue Feb 14 21:56:40 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_src73.ximg exists
[Tue Feb 14 21:56:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_src73.csv
[Tue Feb 14 21:56:40 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_src73_1.ximg exists
[Tue Feb 14 21:56:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_src73.csv
[Tue Feb 14 21:56:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 21:56:41 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Tue Feb 14 21:56:41 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Tue Feb 14 21:56:41 2012] Fit fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Tue Feb 14 21:57:22 2012] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 54 at 14.566267 pixels away
[Tue Feb 14 21:57:22 2012] Warning: source 73 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 54 at 11.433417 pixels away
[Tue Feb 14 21:57:22 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 21:57:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 21:57:22 2012] Assessing source extent using major
[Tue Feb 14 21:57:22 2012] Source does appear to be extended
[Tue Feb 14 21:57:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 02:22:17 2012] Using EEF radius (= 12.49 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 02:22:17 2012] Initial guess for spatial extent in simple fitting = 12.49"
[Wed Feb 15 02:22:17 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.078
[Wed Feb 15 02:22:17 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 12.49"
[Wed Feb 15 03:54:42 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_src71.ximg exists
[Wed Feb 15 03:54:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_src71.csv
[Wed Feb 15 03:54:42 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_src71_1.ximg exists
[Wed Feb 15 03:54:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_src71.csv
[Wed Feb 15 03:54:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 03:54:43 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Wed Feb 15 03:54:43 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Wed Feb 15 03:54:43 2012] Fit fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_tfrozen_src71 appears to have run properly
[Wed Feb 15 03:55:23 2012] Warning: source 71 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 54 at 11.647049 pixels away
[Wed Feb 15 03:55:24 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 03:55:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 03:55:24 2012] Assessing source extent using major
[Wed Feb 15 03:55:24 2012] Source does appear to be extended
[Wed Feb 15 03:55:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 10:35:57 2012] XMMSAS src. selection expression = ellipse(11595.160187, 28434.728638, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 15 10:35:57 2012] Writing source region out to fullrun_mos2_xmm0503560701_pi300-10000_pass1_cl_src54_src.reg
[Wed Feb 15 10:35:57 2012] Extracting stamp from image fullrun_mos2_xmm0503560701_pi300-10000_cl_sm2.00.img.gz, (96, 290) - (171, 365)
[Wed Feb 15 10:35:57 2012] XMMSAS bgd. selection expression = annulus(11595.160187, 28434.728638, 1087.500000, 2175.000000, X, Y) && !ellipse(10638.545830, 30683.039307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13690.955353, 27535.228607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9442.599853, 28751.149944, 535.362247, 267.973608, 95.550103, X, Y) && !ellipse(13520.948800, 26819.915000, 322.935209, 322.935209, 0.000000, X, Y) && !ellipse(12918.718000, 30736.930400, 509.152015, 509.152015, 0.000000, X, Y)
[Wed Feb 15 10:35:57 2012] Writing fullrun_mos2_xmm0503560701_pi300-10000_pass1_cl_src54.gif
[Wed Feb 15 11:01:09 2012] Mean detx,y = (-13294.16, -2713.14) 
[Wed Feb 15 11:01:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 15 11:01:19 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 15 11:01:19 2012] Setting source spectrum file to fullrun_mos2_xmm0503560701_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Wed Feb 15 11:01:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503560701_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Wed Feb 15 12:19:34 2012] Not generating rmf since there are only 55 counts
[Wed Feb 15 12:19:34 2012] rmf not generated due to insufficient counts
[Wed Feb 15 12:21:22 2012] Updating aperture counts using extracted products
[Wed Feb 15 12:21:22 2012] Error reading totcts from fullrun_mos2_xmm0503560701_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Wed Feb 15 12:21:23 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 12:21:23 2012] Using photon index=1.80, rate=0.001, arf fullrun_mos2_xmm0503560701_pi300-10000_pass1_cl_src54.arf
[Wed Feb 15 12:21:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 15 12:21:23 2012] Updating source flux to 2.1e-14
[Wed Feb 15 12:24:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting