[Tue Feb 14 15:33:30 2012] Detection parameters:
  Position = (122.8, 353.2) = 5 35 36.83 -6 16 31.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.6 +/- 17.7
  Background counts = 19.5
  Rate = 0.003 +/- 0.0003

[Tue Feb 14 15:33:32 2012] Off-axis axis estimate = 13.34'
[Tue Feb 14 20:10:32 2012] Using EEF radius (= 13.10 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 20:10:32 2012] Initial guess for spatial extent in simple fitting = 13.10"
[Tue Feb 14 20:10:32 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.994
[Tue Feb 14 20:10:32 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 13.10"
[Tue Feb 14 21:56:40 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_src39.ximg exists
[Tue Feb 14 21:56:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_src39.csv
[Tue Feb 14 21:56:40 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_src39_1.ximg exists
[Tue Feb 14 21:56:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_src39.csv
[Tue Feb 14 21:56:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 21:56:41 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Tue Feb 14 21:56:41 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Tue Feb 14 21:56:41 2012] Fit fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Tue Feb 14 21:57:22 2012] Warning, spatial fit 39 centroid is now closest to src. 54
[Tue Feb 14 21:57:22 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 21:57:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 21:57:22 2012] Assessing source extent using major
[Tue Feb 14 21:57:22 2012] Source does appear to be extended
[Tue Feb 14 21:57:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 02:22:17 2012] Using EEF radius (= 13.10 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 02:22:17 2012] Initial guess for spatial extent in simple fitting = 13.10"
[Wed Feb 15 02:22:17 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.994
[Wed Feb 15 02:22:17 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 13.10"
[Wed Feb 15 03:54:42 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_src39.ximg exists
[Wed Feb 15 03:54:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_src39.csv
[Wed Feb 15 03:54:42 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_src39_1.ximg exists
[Wed Feb 15 03:54:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_src39.csv
[Wed Feb 15 03:54:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 03:54:43 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Wed Feb 15 03:54:43 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Wed Feb 15 03:54:43 2012] Fit fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Wed Feb 15 03:55:23 2012] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 15.823004 pixels away
[Wed Feb 15 03:55:24 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 03:55:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 03:55:24 2012] Assessing source extent using major
[Wed Feb 15 03:55:24 2012] Source does appear to be extended
[Wed Feb 15 03:55:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 10:35:56 2012] XMMSAS src. selection expression = ellipse(10638.545830, 30683.039307, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 15 10:35:56 2012] Writing source region out to fullrun_mos2_xmm0503560701_pi300-10000_pass1_cl_src16_src.reg
[Wed Feb 15 10:35:56 2012] Extracting stamp from image fullrun_mos2_xmm0503560701_pi300-10000_cl_sm2.00.img.gz, (85, 316) - (160, 391)
[Wed Feb 15 10:35:56 2012] XMMSAS bgd. selection expression = annulus(10638.545830, 30683.039307, 1087.500000, 2175.000000, X, Y) && !ellipse(9442.599853, 28751.149944, 535.362247, 267.973608, 95.550103, X, Y) && !ellipse(12918.718000, 30736.930400, 509.152015, 509.152015, 0.000000, X, Y) && !ellipse(12274.777328, 33383.230652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13278.261581, 33457.571472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11595.160187, 28434.728638, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 15 10:35:56 2012] Writing fullrun_mos2_xmm0503560701_pi300-10000_pass1_cl_src16.gif
[Wed Feb 15 10:50:19 2012] Mean detx,y = (-14416.86, -4857.05) 
[Wed Feb 15 10:50:20 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 15 10:50:42 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 15 10:50:43 2012] Setting source spectrum file to fullrun_mos2_xmm0503560701_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Feb 15 10:50:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503560701_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed Feb 15 12:12:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Feb 15 12:12:41 2012] rmf not generated due to insufficient counts
[Wed Feb 15 12:21:21 2012] Updating aperture counts using extracted products
[Wed Feb 15 12:21:21 2012] Error reading totcts from fullrun_mos2_xmm0503560701_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Feb 15 12:21:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 12:21:22 2012] Using photon index=1.80, rate=0.00333, arf fullrun_mos2_xmm0503560701_pi300-10000_pass1_cl_src16.arf
[Wed Feb 15 12:21:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 15 12:21:22 2012] Updating source flux to 7.9e-14
[Wed Feb 15 12:24:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting