[Tue Feb 14 15:33:29 2012] Detection parameters:
  Position = (145.5, 414.7) = 5 35 30.21 -6 12 5.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 215.7 +/- 19.1
  Background counts = 15.9
  Rate = 0.004 +/- 0.0003

[Tue Feb 14 15:33:29 2012] Off-axis axis estimate = 13.93'
[Tue Feb 14 18:34:18 2012] Using EEF radius (= 13.39 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 18:34:18 2012] Initial guess for spatial extent in simple fitting = 13.39"
[Tue Feb 14 18:34:18 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.956
[Tue Feb 14 18:34:18 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 13.39"
[Tue Feb 14 20:10:30 2012] fullrun_mos1_xmm0503560701_pi300-10000_cl_pass0_src29.ximg exists
[Tue Feb 14 20:10:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503560701_pi300-10000_cl_pass0_src29.csv
[Tue Feb 14 20:10:30 2012] fullrun_mos1_xmm0503560701_pi300-10000_cl_pass0_src29_1.ximg exists
[Tue Feb 14 20:10:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503560701_pi300-10000_cl_pass0_src29.csv
[Tue Feb 14 20:10:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503560701_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503560701_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 20:10:31 2012] fullrun_mos1_xmm0503560701_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Tue Feb 14 20:10:31 2012] fullrun_mos1_xmm0503560701_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Tue Feb 14 20:10:31 2012] Fit fullrun_mos1_xmm0503560701_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Tue Feb 14 21:57:09 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 67 at 17.271549 pixels away
[Tue Feb 14 21:57:09 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 21:57:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 21:57:09 2012] Assessing source extent using major
[Tue Feb 14 21:57:09 2012] Source does appear to be extended
[Tue Feb 14 21:57:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 00:36:11 2012] Using EEF radius (= 13.39 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 00:36:11 2012] Initial guess for spatial extent in simple fitting = 13.39"
[Wed Feb 15 00:36:11 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.956
[Wed Feb 15 00:36:11 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 13.39"
[Wed Feb 15 02:22:16 2012] fullrun_mos1_xmm0503560701_pi300-10000_cl_pass1_src29.ximg exists
[Wed Feb 15 02:22:16 2012] fullrun_mos1_xmm0503560701_pi300-10000_cl_pass1_src29_1.ximg exists
[Wed Feb 15 02:22:16 2012] Fit fullrun_mos1_xmm0503560701_pi300-10000_cl_pass1_src29 appears to have run properly
[Wed Feb 15 02:22:16 2012] fullrun_mos1_xmm0503560701_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Wed Feb 15 02:22:16 2012] fullrun_mos1_xmm0503560701_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Wed Feb 15 02:22:16 2012] Fit fullrun_mos1_xmm0503560701_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Wed Feb 15 03:55:12 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 67 at 17.578693 pixels away
[Wed Feb 15 03:55:12 2012] Warning: source 54 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 67 at 27.606969 pixels away
[Wed Feb 15 03:55:12 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 03:55:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 03:55:12 2012] Assessing source extent using major
[Wed Feb 15 03:55:12 2012] Source does appear to be extended
[Wed Feb 15 03:55:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 08:51:18 2012] XMMSAS src. selection expression = ellipse(12611.076614, 36030.828522, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 15 08:51:18 2012] Writing source region out to fullrun_mos1_xmm0503560701_pi300-10000_pass1_cl_src67_src.reg
[Wed Feb 15 08:51:18 2012] Extracting stamp from image fullrun_mos1_xmm0503560701_pi300-10000_cl_sm2.00.img.gz, (108, 377) - (183, 452)
[Wed Feb 15 08:51:18 2012] XMMSAS bgd. selection expression = annulus(12611.076614, 36030.828522, 1087.500000, 2175.000000, X, Y)
[Wed Feb 15 08:51:18 2012] Writing fullrun_mos1_xmm0503560701_pi300-10000_pass1_cl_src67.gif
[Wed Feb 15 09:00:42 2012] Mean detx,y = (-10194.49, 12812.68) 
[Wed Feb 15 09:00:43 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 15 09:01:02 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 15 09:01:02 2012] Setting source spectrum file to fullrun_mos1_xmm0503560701_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Wed Feb 15 09:01:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503560701_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Wed Feb 15 10:19:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Feb 15 10:19:53 2012] rmf not generated due to insufficient counts
[Wed Feb 15 12:21:18 2012] Updating aperture counts using extracted products
[Wed Feb 15 12:21:18 2012] Error reading totcts from fullrun_mos1_xmm0503560701_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Wed Feb 15 12:21:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 12:21:20 2012] Using photon index=1.80, rate=0.00387, arf fullrun_mos1_xmm0503560701_pi300-10000_pass1_cl_src67.arf
[Wed Feb 15 12:21:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 15 12:21:20 2012] Updating source flux to 9.9e-14
[Wed Feb 15 12:21:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting