[Tue Feb 14 15:33:27 2012] Detection parameters:
  Position = (198.6, 392.9) = 5 35 14.72 -6 13 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1003.5 +/- 38.4
  Background counts = 24.4
  Rate = 0.04 +/- 0.001

[Tue Feb 14 15:33:29 2012] Off-axis axis estimate = 9.96'
[Tue Feb 14 18:34:18 2012] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 18:34:18 2012] Initial guess for spatial extent in simple fitting = 11.41"
[Tue Feb 14 18:34:18 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.077
[Tue Feb 14 18:34:18 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.41"
[Tue Feb 14 20:10:30 2012] fullrun_mos1_xmm0503560701_pi300-10000_cl_pass0_src3.ximg exists
[Tue Feb 14 20:10:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503560701_pi300-10000_cl_pass0_src3.csv
[Tue Feb 14 20:10:30 2012] fullrun_mos1_xmm0503560701_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Feb 14 20:10:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503560701_pi300-10000_cl_pass0_src3.csv
[Tue Feb 14 20:10:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503560701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503560701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 20:10:31 2012] fullrun_mos1_xmm0503560701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Feb 14 20:10:31 2012] fullrun_mos1_xmm0503560701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Feb 14 20:10:31 2012] Fit fullrun_mos1_xmm0503560701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Feb 14 21:57:09 2012] Warning, spatial fit 3 centroid is now closest to src. 17
[Tue Feb 14 21:57:09 2012] Source 15 is offset by -2.103862 and 6.146504 pixels which is larger than
2 X fitted extent = 1.284667 x 1.284667, not incorporating fit results
[Tue Feb 14 21:57:09 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 21:57:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 21:57:09 2012] Assessing source extent using major
[Tue Feb 14 21:57:09 2012] Source does appear to be extended
[Tue Feb 14 21:57:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 00:36:11 2012] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 00:36:11 2012] Initial guess for spatial extent in simple fitting = 11.41"
[Wed Feb 15 00:36:11 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.077
[Wed Feb 15 00:36:11 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.41"
[Wed Feb 15 02:22:15 2012] fullrun_mos1_xmm0503560701_pi300-10000_cl_pass1_src3.ximg exists
[Wed Feb 15 02:22:15 2012] fullrun_mos1_xmm0503560701_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Feb 15 02:22:15 2012] Fit fullrun_mos1_xmm0503560701_pi300-10000_cl_pass1_src3 appears to have run properly
[Wed Feb 15 02:22:16 2012] fullrun_mos1_xmm0503560701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Feb 15 02:22:16 2012] fullrun_mos1_xmm0503560701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Feb 15 02:22:16 2012] Fit fullrun_mos1_xmm0503560701_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Feb 15 03:55:12 2012] Warning, spatial fit 3 centroid is now closest to src. 17
[Wed Feb 15 03:55:12 2012] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 14.560954 pixels away
[Wed Feb 15 03:55:12 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 03:55:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 03:55:12 2012] Assessing source extent using major
[Wed Feb 15 03:55:12 2012] Source does appear to be extended
[Wed Feb 15 03:55:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 08:51:18 2012] Counts = 1003.489624, rescaling region sizes by 2.000000
[Wed Feb 15 08:51:18 2012] XMMSAS src. selection expression = ellipse(17231.336029, 34131.117889, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Feb 15 08:51:18 2012] Writing source region out to fullrun_mos1_xmm0503560701_pi300-10000_pass1_cl_src15_src.reg
[Wed Feb 15 08:51:18 2012] Extracting stamp from image fullrun_mos1_xmm0503560701_pi300-10000_cl_sm2.00.img.gz, (124, 318) - (274, 468)
[Wed Feb 15 08:51:18 2012] XMMSAS bgd. selection expression = annulus(17231.336029, 34131.117889, 4350.000000, 8700.000000, X, Y) && !ellipse(22345.666400, 28304.122000, 435.041613, 400.451212, 0.000000, X, Y) && !ellipse(20433.617221, 30109.563720, 919.248546, 371.880642, 102.908648, X, Y) && !ellipse(26076.940600, 25169.506400, 298.409609, 298.409609, 0.000000, X, Y) && !ellipse(14972.156998, 25630.722992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17267.338100, 32267.743200, 577.052017, 441.961613, 333.712787, X, Y) && !ellipse(16571.290000, 28590.210000, 417.091212, 417.091212, 0.000000, X, Y) && !ellipse(10634.210167, 30733.062714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12611.076614, 36030.828522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19364.883080, 27259.782000, 378.623211, 378.623211, 0.000000, X, Y) && !ellipse(13682.464280, 27366.432000, 1787.072051, 542.796016, 107.898000, X, Y) && !ellipse(19711.649040, 26753.164400, 331.259210, 331.259210, 0.000000, X, Y) && !ellipse(18333.673800, 26236.844400, 305.737609, 305.737609, 0.000000, X, Y) && !ellipse(16771.437164, 27987.581879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19948.216500, 25495.668800, 357.331210, 357.331210, 0.000000, X, Y) && !ellipse(19492.351000, 28589.757800, 338.421610, 338.421610, 0.000000, X, Y) && !ellipse(13542.018000, 26871.960800, 345.329610, 345.329610, 0.000000, X, Y) && !ellipse(12272.216200, 33377.097200, 358.606410, 358.606410, 0.000000, X, Y) && !ellipse(9463.554649, 28828.628784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13701.105600, 31821.630220, 389.837611, 389.837611, 0.000000, X, Y) && !ellipse(18330.273895, 34419.406281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13274.735200, 33374.661200, 449.911213, 449.911213, 0.000000, X, Y) && !ellipse(11589.040344, 28406.792419, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 15 08:51:18 2012] Writing fullrun_mos1_xmm0503560701_pi300-10000_pass1_cl_src15.gif
[Wed Feb 15 08:53:03 2012] Mean detx,y = (-8770.62, 8023.98) 
[Wed Feb 15 08:53:04 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 15 08:54:07 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 15 08:54:07 2012] Setting source spectrum file to fullrun_mos1_xmm0503560701_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Feb 15 08:54:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503560701_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed Feb 15 09:17:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Feb 15 09:17:42 2012] rmf not generated due to insufficient counts
[Wed Feb 15 12:21:18 2012] Updating aperture counts using extracted products
[Wed Feb 15 12:21:18 2012] Error reading totcts from fullrun_mos1_xmm0503560701_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Feb 15 12:21:19 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 12:21:19 2012] Using photon index=1.80, rate=0.0356, arf fullrun_mos1_xmm0503560701_pi300-10000_pass1_cl_src15.arf
[Wed Feb 15 12:21:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 15 12:21:19 2012] Updating source flux to 5.5e-13
[Wed Feb 15 12:21:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting