[Fri Feb 10 14:59:44 2012] Detection parameters:
  Position = (244.7, 314.8) = 5 37 41.46 -6 39 31.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.0 +/- 15.0
  Background counts = 77.7
  Rate = 0.003 +/- 0.0004

[Fri Feb 10 14:59:44 2012] Off-axis axis estimate = 4.07'
[Fri Feb 10 15:02:30 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Fri Feb 10 15:02:30 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Fri Feb 10 15:02:30 2012] source mask rpix=1.9, npix_max = 23, mask sum = 15, frac = 0.627
[Fri Feb 10 15:02:30 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 8.47"
[Fri Feb 10 15:47:20 2012] fullrun_pn_xmm0503560601_pi300-10000_cl_pass0_src33.ximg exists
[Fri Feb 10 15:47:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503560601_pi300-10000_cl_pass0_src33.csv
[Fri Feb 10 15:47:20 2012] fullrun_pn_xmm0503560601_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri Feb 10 15:47:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503560601_pi300-10000_cl_pass0_src33.csv
[Fri Feb 10 15:47:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503560601_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503560601_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 10 15:47:21 2012] fullrun_pn_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri Feb 10 15:47:21 2012] fullrun_pn_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Feb 10 15:47:21 2012] Fit fullrun_pn_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Fri Feb 10 16:48:29 2012] Source 38 is offset by 4.146589 and 7.568908 pixels which is larger than
2 X fitted extent = 3.180483 x 3.180483, not incorporating fit results
[Fri Feb 10 16:48:29 2012] Vigneting correction estimate = 1.000000
[Fri Feb 10 16:48:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 10 16:48:29 2012] Assessing source extent using major
[Fri Feb 10 16:48:29 2012] Source does appear to be extended
[Fri Feb 10 16:48:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 10 16:48:47 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Fri Feb 10 16:48:47 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Fri Feb 10 16:48:47 2012] source mask rpix=1.9, npix_max = 23, mask sum = 15, frac = 0.627
[Fri Feb 10 16:48:47 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 8.47"
[Fri Feb 10 17:36:19 2012] fullrun_pn_xmm0503560601_pi300-10000_cl_pass1_src33.ximg exists
[Fri Feb 10 17:36:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503560601_pi300-10000_cl_pass1_src33.csv
[Fri Feb 10 17:36:19 2012] fullrun_pn_xmm0503560601_pi300-10000_cl_pass1_src33_1.ximg exists
[Fri Feb 10 17:36:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503560601_pi300-10000_cl_pass1_src33.csv
[Fri Feb 10 17:36:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503560601_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503560601_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 10 17:36:20 2012] fullrun_pn_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Fri Feb 10 17:36:20 2012] fullrun_pn_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Fri Feb 10 17:36:20 2012] Fit fullrun_pn_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Fri Feb 10 18:33:29 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 31.651461 pixels away
[Fri Feb 10 18:33:29 2012] Source 38 is offset by 4.133417 and 7.568908 pixels which is larger than
2 X fitted extent = 3.216685 x 3.216685, not incorporating fit results
[Fri Feb 10 18:33:29 2012] Vigneting correction estimate = 1.000000
[Fri Feb 10 18:33:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 10 18:33:29 2012] Assessing source extent using major
[Fri Feb 10 18:33:29 2012] Source does appear to be extended
[Fri Feb 10 18:33:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 10 18:33:46 2012] XMMSAS src. selection expression = ellipse(21237.009262, 27337.713013, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Feb 10 18:33:46 2012] Writing source region out to fullrun_pn_xmm0503560601_pi300-10000_pass1_cl_src38_src.reg
[Fri Feb 10 18:33:46 2012] Extracting stamp from image fullrun_pn_xmm0503560601_pi300-10000_cl_sm2.00.img.gz, (207, 277) - (282, 352)
[Fri Feb 10 18:33:46 2012] XMMSAS bgd. selection expression = annulus(21237.009262, 27337.713013, 1087.500000, 2175.000000, X, Y) && !ellipse(20848.637680, 26483.369400, 468.385613, 468.385613, 0.000000, X, Y) && !ellipse(18232.706879, 25014.562378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20061.635757, 28758.597076, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 10 18:33:46 2012] Writing fullrun_pn_xmm0503560601_pi300-10000_pass1_cl_src38.gif
[Fri Feb 10 18:57:21 2012] Mean detx,y = (3939.27, 2289.69) 
[Fri Feb 10 18:57:23 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 10 18:57:36 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 10 18:57:37 2012] Setting source spectrum file to fullrun_pn_xmm0503560601_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Fri Feb 10 18:57:37 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503560601_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Fri Feb 10 19:38:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Feb 10 19:38:45 2012] rmf not generated due to insufficient counts
[Fri Feb 10 20:37:33 2012] Updating aperture counts using extracted products
[Fri Feb 10 20:37:33 2012] Error reading totcts from fullrun_pn_xmm0503560601_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Fri Feb 10 20:37:33 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 10 20:37:33 2012] Using photon index=1.80, rate=0.00314, arf fullrun_pn_xmm0503560601_pi300-10000_pass1_cl_src38.arf
[Fri Feb 10 20:37:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 10 20:37:33 2012] Updating source flux to 1.1e-14
[Fri Feb 10 20:38:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting