[Fri Feb 10 14:59:44 2012] Detection parameters:
  Position = (352.2, 229.1) = 5 37 10.07 -6 45 45.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 906.2 +/- 37.4
  Background counts = 75.0
  Rate = 0.02 +/- 0.0007

[Fri Feb 10 14:59:44 2012] Off-axis axis estimate = 6.36'
[Fri Feb 10 15:02:30 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Fri Feb 10 15:02:30 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Fri Feb 10 15:02:30 2012] source mask rpix=2.2, npix_max = 29, mask sum = 19, frac = 0.647
[Fri Feb 10 15:02:30 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 9.61"
[Fri Feb 10 15:47:20 2012] fullrun_pn_xmm0503560601_pi300-10000_cl_pass0_src14.ximg exists
[Fri Feb 10 15:47:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503560601_pi300-10000_cl_pass0_src14.csv
[Fri Feb 10 15:47:20 2012] fullrun_pn_xmm0503560601_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri Feb 10 15:47:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503560601_pi300-10000_cl_pass0_src14.csv
[Fri Feb 10 15:47:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503560601_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503560601_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 10 15:47:21 2012] fullrun_pn_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri Feb 10 15:47:21 2012] fullrun_pn_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Feb 10 15:47:21 2012] Fit fullrun_pn_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Feb 10 16:48:29 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 13.074614 pixels away
[Fri Feb 10 16:48:29 2012] Vigneting correction estimate = 1.000000
[Fri Feb 10 16:48:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 10 16:48:29 2012] Assessing source extent using major
[Fri Feb 10 16:48:29 2012] Source does appear to be extended
[Fri Feb 10 16:48:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 10 16:48:29 2012] Source is confused with source 16
[Fri Feb 10 16:48:47 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Fri Feb 10 16:48:47 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Fri Feb 10 16:48:47 2012] source mask rpix=2.2, npix_max = 29, mask sum = 19, frac = 0.647
[Fri Feb 10 16:48:47 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 9.61"
[Fri Feb 10 17:36:19 2012] fullrun_pn_xmm0503560601_pi300-10000_cl_pass1_src14.ximg exists
[Fri Feb 10 17:36:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503560601_pi300-10000_cl_pass1_src14.csv
[Fri Feb 10 17:36:19 2012] fullrun_pn_xmm0503560601_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri Feb 10 17:36:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503560601_pi300-10000_cl_pass1_src14.csv
[Fri Feb 10 17:36:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503560601_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503560601_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 10 17:36:19 2012] fullrun_pn_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri Feb 10 17:36:19 2012] fullrun_pn_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Feb 10 17:36:19 2012] Fit fullrun_pn_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Fri Feb 10 18:33:29 2012] Spatial fit model total counts = 1608.000000, observed total counts = 1608.000000
[Fri Feb 10 18:33:29 2012] Offset between fit and detection position for source 17 = 0.535735 pixels
[Fri Feb 10 18:33:29 2012] 1612.549000 total counts/ 980.223000 bgd. counts: snr = 20.196615
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.535735 pixels
  Position = (352.4, 229.5) = 5 37 10.00 -6 45 44.7
  Extent = 5.4 (5.1-5.9)", rotation angle = 0
  Source counts = 632.3 +/- 40.2
  Background counts = 980.2
  Rate = 0.01 +/- 0.0008
[Fri Feb 10 18:33:29 2012] Vigneting correction estimate = 1.000000
[Fri Feb 10 18:33:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 10 18:33:29 2012] Assessing source extent using major axis lower bound
[Fri Feb 10 18:33:29 2012] Source does appear to be extended
[Fri Feb 10 18:33:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 10 18:33:46 2012] XMMSAS src. selection expression = ellipse(30611.717400, 19920.327000, 325.047609, 325.047609, 0.000000, X, Y)
[Fri Feb 10 18:33:46 2012] Writing source region out to fullrun_pn_xmm0503560601_pi300-10000_pass1_cl_src17_src.reg
[Fri Feb 10 18:33:46 2012] Extracting stamp from image fullrun_pn_xmm0503560601_pi300-10000_cl_sm2.00.img.gz, (334, 211) - (371, 248)
[Fri Feb 10 18:33:46 2012] XMMSAS bgd. selection expression = annulus(30611.717400, 19920.327000, 541.746016, 1083.492031, X, Y) && !ellipse(30194.131592, 19911.930603, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 10 18:33:46 2012] Writing fullrun_pn_xmm0503560601_pi300-10000_pass1_cl_src17.gif
[Fri Feb 10 18:45:33 2012] Mean detx,y = (-6380.10, -3968.20) 
[Fri Feb 10 18:45:35 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 10 18:45:43 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 10 18:45:44 2012] Setting source spectrum file to fullrun_pn_xmm0503560601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Feb 10 18:45:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503560601_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Fri Feb 10 20:37:32 2012] Updating aperture counts using extracted products
[Fri Feb 10 20:37:32 2012] Error reading totcts from fullrun_pn_xmm0503560601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Feb 10 20:37:33 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 10 20:37:33 2012] Using photon index=1.80, rate=0.0119, arf fullrun_pn_xmm0503560601_pi300-10000_pass1_cl_src17.arf
[Fri Feb 10 20:37:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 10 20:37:33 2012] Updating source flux to 6.4e-14
[Fri Feb 10 20:38:31 2012] Flag c found in src. 17 procflags, skipping spectral fitting