[Fri Feb 10 15:00:17 2012] Detection parameters:
  Position = (211.1, 310.6) = 5 37 51.26 -6 39 51.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 489.3 +/- 27.9
  Background counts = 18.2
  Rate = 0.01 +/- 0.0007

[Fri Feb 10 15:00:18 2012] Off-axis axis estimate = 6.39'
[Fri Feb 10 16:07:51 2012] Using EEF radius (= 9.63 ")to estimate initial spatial extent for simple fitting
[Fri Feb 10 16:07:51 2012] Initial guess for spatial extent in simple fitting = 9.63"
[Fri Feb 10 16:07:51 2012] source mask rpix=2.2, npix_max = 29, mask sum = 28, frac = 0.951
[Fri Feb 10 16:07:51 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.63"
[Fri Feb 10 16:48:21 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_src7.ximg exists
[Fri Feb 10 16:48:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_src7.csv
[Fri Feb 10 16:48:21 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Feb 10 16:48:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_src7.csv
[Fri Feb 10 16:48:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 10 16:48:22 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Feb 10 16:48:22 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Feb 10 16:48:22 2012] Fit fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Feb 10 16:48:37 2012] Spatial fit model total counts = 647.000000, observed total counts = 647.000000
[Fri Feb 10 16:48:37 2012] Offset between fit and detection position for source 7 = 0.196798 pixels
[Fri Feb 10 16:48:37 2012] 648.328000 total counts/ 322.070000 bgd. counts: snr = 18.179672
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.196798 pixels
  Position = (211.3, 310.6) = 5 37 51.20 -6 39 52.1
  Extent = 5.2 (4.4-5.9)", rotation angle = 0
  Source counts = 326.3 +/- 25.5
  Background counts = 322.1
  Rate = 0.006 +/- 0.0005
[Fri Feb 10 16:48:37 2012] Vigneting correction estimate = 1.000000
[Fri Feb 10 16:48:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 10 16:48:37 2012] Assessing source extent using major axis lower bound
[Fri Feb 10 16:48:37 2012] Source does appear to be extended
[Fri Feb 10 16:48:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 10 17:55:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 10 17:55:39 2012] Initial guess for spatial extent in simple fitting = 5.21"
[Fri Feb 10 17:55:39 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.781
[Fri Feb 10 17:55:39 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 5.21"
[Fri Feb 10 18:33:22 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_src7.ximg exists
[Fri Feb 10 18:33:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_src7.csv
[Fri Feb 10 18:33:22 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Feb 10 18:33:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_src7.csv
[Fri Feb 10 18:33:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 10 18:33:22 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Feb 10 18:33:22 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Feb 10 18:33:22 2012] Fit fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Feb 10 18:33:36 2012] Spatial fit model total counts = 652.263000, observed total counts = 652.000000
[Fri Feb 10 18:33:36 2012] Offset between fit and detection position for source 7 = 0.016771 pixels
[Fri Feb 10 18:33:36 2012] 656.956000 total counts/ 337.938000 bgd. counts: snr = 17.353883
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.016771 pixels
  Position = (211.3, 310.6) = 5 37 51.20 -6 39 52.2
  Extent = 5.0 (4.4-5.8)", rotation angle = 0
  Source counts = 319.0 +/- 25.6
  Background counts = 337.9
  Rate = 0.006 +/- 0.0005
[Fri Feb 10 18:33:36 2012] Vigneting correction estimate = 1.000000
[Fri Feb 10 18:33:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 10 18:33:36 2012] Assessing source extent using major axis lower bound
[Fri Feb 10 18:33:36 2012] Source does appear to be extended
[Fri Feb 10 18:33:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 10 20:05:24 2012] XMMSAS src. selection expression = ellipse(18334.014600, 26970.614200, 301.411209, 301.411209, 0.000000, X, Y)
[Fri Feb 10 20:05:24 2012] Writing source region out to fullrun_mos2_xmm0503560601_pi300-10000_pass1_cl_src7_src.reg
[Fri Feb 10 20:05:24 2012] Extracting stamp from image fullrun_mos2_xmm0503560601_pi300-10000_cl_sm2.00.img.gz, (194, 293) - (229, 328)
[Fri Feb 10 20:05:24 2012] XMMSAS bgd. selection expression = annulus(18334.014600, 26970.614200, 502.352014, 1004.704029, X, Y)
[Fri Feb 10 20:05:24 2012] Writing fullrun_mos2_xmm0503560601_pi300-10000_pass1_cl_src7.gif
[Fri Feb 10 20:07:22 2012] Mean detx,y = (-6469.80, -1779.55) 
[Fri Feb 10 20:07:23 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 10 20:07:30 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 10 20:07:30 2012] Setting source spectrum file to fullrun_mos2_xmm0503560601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Feb 10 20:07:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503560601_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Feb 10 20:37:34 2012] Updating aperture counts using extracted products
[Fri Feb 10 20:37:34 2012] Error reading totcts from fullrun_mos2_xmm0503560601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Feb 10 20:37:35 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 10 20:37:35 2012] Using photon index=1.80, rate=0.00574, arf fullrun_mos2_xmm0503560601_pi300-10000_pass1_cl_src7.arf
[Fri Feb 10 20:37:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 10 20:37:35 2012] Updating source flux to 1.8e-13