[Fri Feb 10 15:00:18 2012] Detection parameters:
  Position = (164.5, 330.4) = 5 38 4.86 -6 38 25.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.5 +/- 10.8
  Background counts = 18.7
  Rate = 0.002 +/- 0.0003

[Fri Feb 10 15:00:18 2012] Off-axis axis estimate = 9.98'
[Fri Feb 10 16:07:51 2012] Using EEF radius (= 11.42 ")to estimate initial spatial extent for simple fitting
[Fri Feb 10 16:07:51 2012] Initial guess for spatial extent in simple fitting = 11.42"
[Fri Feb 10 16:07:51 2012] source mask rpix=2.6, npix_max = 39, mask sum = 49, frac = 1.254
[Fri Feb 10 16:07:51 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 11.42"
[Fri Feb 10 16:48:22 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_src28.ximg exists
[Fri Feb 10 16:48:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_src28.csv
[Fri Feb 10 16:48:22 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri Feb 10 16:48:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_src28.csv
[Fri Feb 10 16:48:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 10 16:48:22 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri Feb 10 16:48:22 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Feb 10 16:48:22 2012] Fit fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Fri Feb 10 16:48:37 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 13.283493 pixels away
[Fri Feb 10 16:48:37 2012] Vigneting correction estimate = 1.000000
[Fri Feb 10 16:48:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 10 16:48:37 2012] Assessing source extent using major
[Fri Feb 10 16:48:37 2012] Source does appear to be extended
[Fri Feb 10 16:48:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 10 17:55:39 2012] Using EEF radius (= 11.42 ")to estimate initial spatial extent for simple fitting
[Fri Feb 10 17:55:39 2012] Initial guess for spatial extent in simple fitting = 11.42"
[Fri Feb 10 17:55:39 2012] source mask rpix=2.6, npix_max = 39, mask sum = 49, frac = 1.254
[Fri Feb 10 17:55:39 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 11.42"
[Fri Feb 10 18:33:22 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_src28.ximg exists
[Fri Feb 10 18:33:22 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_src28_1.ximg exists
[Fri Feb 10 18:33:22 2012] Fit fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_src28 appears to have run properly
[Fri Feb 10 18:33:23 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Fri Feb 10 18:33:23 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Fri Feb 10 18:33:23 2012] Fit fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Fri Feb 10 18:33:36 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 13.908973 pixels away
[Fri Feb 10 18:33:36 2012] Vigneting correction estimate = 1.000000
[Fri Feb 10 18:33:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 10 18:33:36 2012] Assessing source extent using major
[Fri Feb 10 18:33:36 2012] Source does appear to be extended
[Fri Feb 10 18:33:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 10 20:05:24 2012] XMMSAS src. selection expression = ellipse(14262.863266, 28694.610870, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Feb 10 20:05:24 2012] Writing source region out to fullrun_mos2_xmm0503560601_pi300-10000_pass1_cl_src28_src.reg
[Fri Feb 10 20:05:24 2012] Extracting stamp from image fullrun_mos2_xmm0503560601_pi300-10000_cl_sm2.00.img.gz, (127, 293) - (202, 368)
[Fri Feb 10 20:05:24 2012] XMMSAS bgd. selection expression = annulus(14262.863266, 28694.610870, 1087.500000, 2175.000000, X, Y)
[Fri Feb 10 20:05:24 2012] Writing fullrun_mos2_xmm0503560601_pi300-10000_pass1_cl_src28.gif
[Fri Feb 10 20:10:48 2012] Mean detx,y = (-10710.08, -3020.16) 
[Fri Feb 10 20:10:49 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 10 20:10:54 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 10 20:10:54 2012] Setting source spectrum file to fullrun_mos2_xmm0503560601_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Fri Feb 10 20:10:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503560601_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Fri Feb 10 20:35:36 2012] Not generating rmf since there are only 55 counts
[Fri Feb 10 20:35:36 2012] rmf not generated due to insufficient counts
[Fri Feb 10 20:37:34 2012] Updating aperture counts using extracted products
[Fri Feb 10 20:37:34 2012] Error reading totcts from fullrun_mos2_xmm0503560601_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Fri Feb 10 20:37:35 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 10 20:37:35 2012] Using photon index=1.80, rate=0.00174, arf fullrun_mos2_xmm0503560601_pi300-10000_pass1_cl_src28.arf
[Fri Feb 10 20:37:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 10 20:37:35 2012] Updating source flux to 3.1e-14
[Fri Feb 10 20:37:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting