[Fri Feb 10 15:00:17 2012] Detection parameters:
  Position = (350.1, 371.1) = 5 37 10.67 -6 35 28.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2034.7 +/- 55.4
  Background counts = 17.7
  Rate = 0.06 +/- 0.002

[Fri Feb 10 15:00:18 2012] Off-axis axis estimate = 6.47'
[Fri Feb 10 16:07:51 2012] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting
[Fri Feb 10 16:07:51 2012] Initial guess for spatial extent in simple fitting = 9.66"
[Fri Feb 10 16:07:51 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.215
[Fri Feb 10 16:07:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.66"
[Fri Feb 10 16:48:21 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_src1.ximg exists
[Fri Feb 10 16:48:21 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Feb 10 16:48:21 2012] Fit fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Feb 10 16:48:22 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 10 16:48:22 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 10 16:48:22 2012] Fit fullrun_mos2_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 10 16:48:37 2012] Spatial fit model total counts = 2140.550000, observed total counts = 2144.000000
[Fri Feb 10 16:48:37 2012] Offset between fit and detection position for source 2 = 0.288735 pixels
[Fri Feb 10 16:48:37 2012] 2129.160000 total counts/ 675.270000 bgd. counts: snr = 55.949063
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.288735 pixels
  Position = (349.8, 371.3) = 5 37 10.75 -6 35 28.2
  Extent = 5.9 (5.6-6.1)", rotation angle = 0
  Source counts = 1453.9 +/- 46.1
  Background counts = 675.3
  Rate = 0.03 +/- 0.0008
[Fri Feb 10 16:48:37 2012] Vigneting correction estimate = 1.000000
[Fri Feb 10 16:48:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 10 16:48:37 2012] Assessing source extent using major axis lower bound
[Fri Feb 10 16:48:37 2012] Source does appear to be extended
[Fri Feb 10 16:48:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 10 17:55:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 10 17:55:39 2012] Initial guess for spatial extent in simple fitting = 5.86"
[Fri Feb 10 17:55:39 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.172
[Fri Feb 10 17:55:39 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.86"
[Fri Feb 10 18:33:22 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_src1.ximg exists
[Fri Feb 10 18:33:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_src1.csv
[Fri Feb 10 18:33:22 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Feb 10 18:33:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_src1.csv
[Fri Feb 10 18:33:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 10 18:33:22 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 10 18:33:22 2012] fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 10 18:33:22 2012] Fit fullrun_mos2_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 10 18:33:36 2012] Spatial fit model total counts = 2029.410000, observed total counts = 2031.000000
[Fri Feb 10 18:33:36 2012] Offset between fit and detection position for source 2 = 0.011593 pixels
[Fri Feb 10 18:33:36 2012] 2023.812000 total counts/ 588.842000 bgd. counts: snr = 59.134841
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.011593 pixels
  Position = (349.8, 371.3) = 5 37 10.75 -6 35 28.1
  Extent = 5.8 (5.4-6.0)", rotation angle = 0
  Source counts = 1435.0 +/- 45.0
  Background counts = 588.8
  Rate = 0.03 +/- 0.0008
[Fri Feb 10 18:33:36 2012] Vigneting correction estimate = 1.000000
[Fri Feb 10 18:33:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 10 18:33:36 2012] Assessing source extent using major axis lower bound
[Fri Feb 10 18:33:36 2012] Source does appear to be extended
[Fri Feb 10 18:33:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 10 20:05:24 2012] Counts = 1434.970000, rescaling region sizes by 2.000000
[Fri Feb 10 20:05:24 2012] XMMSAS src. selection expression = ellipse(30387.577800, 32252.224200, 690.435620, 690.435620, 0.000000, X, Y)
[Fri Feb 10 20:05:24 2012] Writing source region out to fullrun_mos2_xmm0503560601_pi300-10000_pass1_cl_src2_src.reg
[Fri Feb 10 20:05:24 2012] Extracting stamp from image fullrun_mos2_xmm0503560601_pi300-10000_cl_sm2.00.img.gz, (310, 332) - (390, 411)
[Fri Feb 10 20:05:24 2012] XMMSAS bgd. selection expression = annulus(30387.577800, 32252.224200, 2301.452066, 4602.904132, X, Y) && !ellipse(26067.585720, 34984.193400, 402.745612, 402.745612, 0.000000, X, Y) && !ellipse(33559.870200, 34653.470400, 622.264018, 308.377609, 40.872063, X, Y) && !ellipse(29239.391022, 32511.831451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35613.104797, 32754.179871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27259.843220, 34344.369400, 353.787210, 353.787210, 0.000000, X, Y) && !ellipse(29586.711334, 32830.089813, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 10 20:05:24 2012] Writing fullrun_mos2_xmm0503560601_pi300-10000_pass1_cl_src2.gif
[Fri Feb 10 20:05:27 2012] Mean detx,y = (4879.88, -8441.87) 
[Fri Feb 10 20:05:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 10 20:05:52 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 10 20:05:52 2012] Setting source spectrum file to fullrun_mos2_xmm0503560601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Feb 10 20:05:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503560601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Feb 10 20:37:34 2012] Updating aperture counts using extracted products
[Fri Feb 10 20:37:34 2012] Error reading totcts from fullrun_mos2_xmm0503560601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Feb 10 20:37:34 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 10 20:37:34 2012] Using photon index=1.80, rate=0.0258, arf fullrun_mos2_xmm0503560601_pi300-10000_pass1_cl_src2.arf
[Fri Feb 10 20:37:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 10 20:37:34 2012] Updating source flux to 4.4e-13
[Fri Feb 10 20:38:31 2012] Reading fit data from xmm0503560601/analysis//spectral/fullrun_mos2_xmm0503560601_pi300-10000_pass1_cl_src2_pl.csv
[Fri Feb 10 20:38:31 2012] Spectral fit parameter nH value = 2.49478e+21
[Fri Feb 10 20:38:31 2012] Spectral fit parameter PhoIndex value = 3.05232
[Fri Feb 10 20:38:31 2012] Failed to get F(0.3-8.0) from xmm0503560601/analysis//spectral/fullrun_mos2_xmm0503560601_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Feb 10 20:38:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 10 20:38:31 2012] Using Nh = 2.5e+21, photon index=3.05, rate=0.0258, arf fullrun_mos2_xmm0503560601_pi300-10000_pass1_cl_src2.arf
[Fri Feb 10 20:38:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 10 20:38:31 2012] Updating source flux to 3.3e-13