[Fri Feb 10 14:59:59 2012] Detection parameters:
  Position = (410.6, 377.1) = 5 36 53.01 -6 35 1.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.8 +/- 13.0
  Background counts = 20.0
  Rate = 0.002 +/- 0.0002

[Fri Feb 10 14:59:59 2012] Off-axis axis estimate = 9.94'
[Fri Feb 10 15:47:21 2012] Using EEF radius (= 11.40 ")to estimate initial spatial extent for simple fitting
[Fri Feb 10 15:47:21 2012] Initial guess for spatial extent in simple fitting = 11.40"
[Fri Feb 10 15:47:21 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.079
[Fri Feb 10 15:47:21 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 11.40"
[Fri Feb 10 16:07:50 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_src19.ximg exists
[Fri Feb 10 16:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_src19.csv
[Fri Feb 10 16:07:50 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_src19_1.ximg exists
[Fri Feb 10 16:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_src19.csv
[Fri Feb 10 16:07:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 10 16:07:51 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Fri Feb 10 16:07:51 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Feb 10 16:07:51 2012] Fit fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Fri Feb 10 16:48:32 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.497701 pixels away
[Fri Feb 10 16:48:32 2012] Vigneting correction estimate = 1.000000
[Fri Feb 10 16:48:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 10 16:48:32 2012] Assessing source extent using major
[Fri Feb 10 16:48:32 2012] Source does appear to be extended
[Fri Feb 10 16:48:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 10 17:36:20 2012] Using EEF radius (= 11.40 ")to estimate initial spatial extent for simple fitting
[Fri Feb 10 17:36:20 2012] Initial guess for spatial extent in simple fitting = 11.40"
[Fri Feb 10 17:36:20 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.079
[Fri Feb 10 17:36:20 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 11.40"
[Fri Feb 10 17:55:39 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_src18.ximg exists
[Fri Feb 10 17:55:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_src18.csv
[Fri Feb 10 17:55:39 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri Feb 10 17:55:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_src18.csv
[Fri Feb 10 17:55:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 10 17:55:39 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri Feb 10 17:55:39 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri Feb 10 17:55:39 2012] Fit fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Fri Feb 10 18:33:31 2012] Spatial fit model total counts = 306.999000, observed total counts = 307.000000
[Fri Feb 10 18:33:31 2012] Offset between fit and detection position for source 6 = 0.254660 pixels
[Fri Feb 10 18:33:31 2012] 306.381800 total counts/ 255.132000 bgd. counts: snr = 3.208557
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.254660 pixels
  Position = (410.4, 377.2) = 5 36 53.08 -6 35 2.3
  Extent = 5.0 (3.7-7.3)", rotation angle = 0
  Source counts = 51.2 +/- 17.5
  Background counts = 255.1
  Rate = 0.0009 +/- 0.0003
[Fri Feb 10 18:33:31 2012] Vigneting correction estimate = 1.000000
[Fri Feb 10 18:33:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 10 18:33:31 2012] Assessing source extent using major axis lower bound
[Fri Feb 10 18:33:31 2012] Source does appear to be extended
[Fri Feb 10 18:33:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 10 19:46:29 2012] XMMSAS src. selection expression = ellipse(35653.811800, 32768.560600, 298.606809, 298.606809, 0.000000, X, Y)
[Fri Feb 10 19:46:29 2012] Writing source region out to fullrun_mos1_xmm0503560601_pi300-10000_pass1_cl_src6_src.reg
[Fri Feb 10 19:46:29 2012] Extracting stamp from image fullrun_mos1_xmm0503560601_pi300-10000_cl_sm2.00.img.gz, (393, 360) - (428, 394)
[Fri Feb 10 19:46:29 2012] XMMSAS bgd. selection expression = annulus(35653.811800, 32768.560600, 497.678014, 995.356029, X, Y)
[Fri Feb 10 19:46:29 2012] Writing fullrun_mos1_xmm0503560601_pi300-10000_pass1_cl_src6.gif
[Fri Feb 10 19:50:16 2012] Mean detx,y = (-9314.72, -10255.49) 
[Fri Feb 10 19:50:16 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 10 19:50:20 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 10 19:50:20 2012] Setting source spectrum file to fullrun_mos1_xmm0503560601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Feb 10 19:50:20 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503560601_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Feb 10 20:04:54 2012] Not generating rmf since there are only 51 counts
[Fri Feb 10 20:04:54 2012] rmf not generated due to insufficient counts
[Fri Feb 10 20:37:34 2012] Updating aperture counts using extracted products
[Fri Feb 10 20:37:34 2012] Error reading totcts from fullrun_mos1_xmm0503560601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Feb 10 20:37:34 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 10 20:37:34 2012] Using photon index=1.80, rate=0.000922, arf fullrun_mos1_xmm0503560601_pi300-10000_pass1_cl_src6.arf
[Fri Feb 10 20:37:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 10 20:37:34 2012] Updating source flux to 2.8e-14
[Fri Feb 10 20:37:36 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting