[Fri Feb 10 14:59:59 2012] Detection parameters:
  Position = (96.0, 237.6) = 5 38 24.88 -6 45 9.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.9 +/- 12.7
  Background counts = 18.2
  Rate = 0.001 +/- 0.0002

[Fri Feb 10 14:59:59 2012] Off-axis axis estimate = 15.33'
[Fri Feb 10 15:47:21 2012] Using EEF radius (= 14.09 ")to estimate initial spatial extent for simple fitting
[Fri Feb 10 15:47:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 10 15:47:21 2012] Initial guess for spatial extent in simple fitting = 14.09"
[Fri Feb 10 15:47:21 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.001
[Fri Feb 10 15:47:21 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 14.09"
[Fri Feb 10 16:07:50 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_src21.ximg exists
[Fri Feb 10 16:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_src21.csv
[Fri Feb 10 16:07:50 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri Feb 10 16:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_src21.csv
[Fri Feb 10 16:07:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 10 16:07:51 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri Feb 10 16:07:51 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Feb 10 16:07:51 2012] Fit fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Fri Feb 10 16:48:32 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 18.578356 pixels away
[Fri Feb 10 16:48:32 2012] Vigneting correction estimate = 1.000000
[Fri Feb 10 16:48:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 10 16:48:32 2012] Assessing source extent using major
[Fri Feb 10 16:48:32 2012] Source does appear to be extended
[Fri Feb 10 16:48:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 10 17:36:20 2012] Using EEF radius (= 14.09 ")to estimate initial spatial extent for simple fitting
[Fri Feb 10 17:36:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 10 17:36:20 2012] Initial guess for spatial extent in simple fitting = 14.09"
[Fri Feb 10 17:36:20 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.001
[Fri Feb 10 17:36:20 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 14.09"
[Fri Feb 10 17:55:39 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_src20.ximg exists
[Fri Feb 10 17:55:39 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri Feb 10 17:55:39 2012] Fit fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_src20 appears to have run properly
[Fri Feb 10 17:55:39 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri Feb 10 17:55:39 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Feb 10 17:55:39 2012] Fit fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Fri Feb 10 18:33:31 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 18.595769 pixels away
[Fri Feb 10 18:33:31 2012] Vigneting correction estimate = 1.000000
[Fri Feb 10 18:33:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 10 18:33:31 2012] Assessing source extent using major
[Fri Feb 10 18:33:31 2012] Source does appear to be extended
[Fri Feb 10 18:33:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 10 19:46:29 2012] XMMSAS src. selection expression = ellipse(8302.413429, 20625.432556, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Feb 10 19:46:29 2012] Writing source region out to fullrun_mos1_xmm0503560601_pi300-10000_pass1_cl_src18_src.reg
[Fri Feb 10 19:46:29 2012] Extracting stamp from image fullrun_mos1_xmm0503560601_pi300-10000_cl_sm2.00.img.gz, (58, 200) - (133, 275)
[Fri Feb 10 19:46:29 2012] XMMSAS bgd. selection expression = annulus(8302.413429, 20625.432556, 1087.500000, 2175.000000, X, Y)
[Fri Feb 10 19:46:29 2012] Writing fullrun_mos1_xmm0503560601_pi300-10000_pass1_cl_src18.gif
[Fri Feb 10 19:50:41 2012] Mean detx,y = (5911.71, 15462.94) 
[Fri Feb 10 19:50:42 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 10 19:50:53 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 10 19:50:54 2012] Setting source spectrum file to fullrun_mos1_xmm0503560601_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Feb 10 19:50:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503560601_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri Feb 10 20:05:08 2012] Not generating rmf since there are only 74 counts
[Fri Feb 10 20:05:08 2012] rmf not generated due to insufficient counts
[Fri Feb 10 20:37:34 2012] Updating aperture counts using extracted products
[Fri Feb 10 20:37:34 2012] Error reading totcts from fullrun_mos1_xmm0503560601_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Feb 10 20:37:34 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 10 20:37:34 2012] Using photon index=1.80, rate=0.00135, arf fullrun_mos1_xmm0503560601_pi300-10000_pass1_cl_src18.arf
[Fri Feb 10 20:37:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 10 20:37:34 2012] Updating source flux to 3.7e-14
[Fri Feb 10 20:37:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting