[Fri Feb 10 14:59:59 2012] Detection parameters:
  Position = (270.1, 253.4) = 5 37 34.04 -6 44 1.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.8 +/- 11.3
  Background counts = 21.4
  Rate = 0.001 +/- 0.0002

[Fri Feb 10 14:59:59 2012] Off-axis axis estimate = 3.86'
[Fri Feb 10 15:47:21 2012] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Fri Feb 10 15:47:21 2012] Initial guess for spatial extent in simple fitting = 8.36"
[Fri Feb 10 15:47:21 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.853
[Fri Feb 10 15:47:21 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 8.36"
[Fri Feb 10 16:07:50 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_src24.ximg exists
[Fri Feb 10 16:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_src24.csv
[Fri Feb 10 16:07:50 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_src24_1.ximg exists
[Fri Feb 10 16:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_src24.csv
[Fri Feb 10 16:07:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 10 16:07:51 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Fri Feb 10 16:07:51 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Fri Feb 10 16:07:51 2012] Fit fullrun_mos1_xmm0503560601_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Fri Feb 10 16:48:32 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 12.352821 pixels away
[Fri Feb 10 16:48:32 2012] Spatial fit model total counts = 272.000000, observed total counts = 272.000000
[Fri Feb 10 16:48:32 2012] Offset between fit and detection position for source 16 = 0.022086 pixels
[Fri Feb 10 16:48:32 2012] 270.255300 total counts/ 235.941000 bgd. counts: snr = 2.233950
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.022086 pixels
  Position = (270.1, 253.4) = 5 37 34.04 -6 44 0.9
  Extent = 4.0 (2.2-5.9)", rotation angle = 0
  Source counts = 34.3 +/- 16.4
  Background counts = 235.9
  Rate = 0.0006 +/- 0.0003
[Fri Feb 10 16:48:32 2012] Vigneting correction estimate = 1.000000
[Fri Feb 10 16:48:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 10 16:48:32 2012] Assessing source extent using major axis lower bound
[Fri Feb 10 16:48:32 2012] Source does appear to be extended
[Fri Feb 10 16:48:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 10 17:36:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 10 17:36:20 2012] Initial guess for spatial extent in simple fitting = 4.00"
[Fri Feb 10 17:36:20 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.116
[Fri Feb 10 17:36:20 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 4.00"
[Fri Feb 10 17:55:39 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_src23.ximg exists
[Fri Feb 10 17:55:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_src23.csv
[Fri Feb 10 17:55:39 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri Feb 10 17:55:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_src23.csv
[Fri Feb 10 17:55:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 10 17:55:39 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri Feb 10 17:55:39 2012] fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Feb 10 17:55:39 2012] Fit fullrun_mos1_xmm0503560601_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Fri Feb 10 18:33:31 2012] Spatial fit model total counts = 272.000000, observed total counts = 272.000000
[Fri Feb 10 18:33:31 2012] Offset between fit and detection position for source 16 = 0.000524 pixels
[Fri Feb 10 18:33:31 2012] 270.254600 total counts/ 235.957000 bgd. counts: snr = 2.232787
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.000524 pixels
  Position = (270.1, 253.4) = 5 37 34.04 -6 44 0.9
  Extent = 4.0 (2.2-5.9)", rotation angle = 0
  Source counts = 34.3 +/- 16.4
  Background counts = 236.0
  Rate = 0.0006 +/- 0.0003
[Fri Feb 10 18:33:31 2012] Vigneting correction estimate = 1.000000
[Fri Feb 10 18:33:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 10 18:33:31 2012] Assessing source extent using major axis lower bound
[Fri Feb 10 18:33:31 2012] Source does appear to be extended
[Fri Feb 10 18:33:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 10 19:46:29 2012] XMMSAS src. selection expression = ellipse(23449.247460, 21996.690600, 239.934695, 239.934695, 0.000000, X, Y)
[Fri Feb 10 19:46:29 2012] Writing source region out to fullrun_mos1_xmm0503560601_pi300-10000_pass1_cl_src16_src.reg
[Fri Feb 10 19:46:29 2012] Extracting stamp from image fullrun_mos1_xmm0503560601_pi300-10000_cl_sm2.00.img.gz, (256, 240) - (284, 267)
[Fri Feb 10 19:46:29 2012] XMMSAS bgd. selection expression = annulus(23449.247460, 21996.690600, 399.891158, 799.782316, X, Y) && !ellipse(21966.035172, 20422.803375, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 10 19:46:29 2012] Writing fullrun_mos1_xmm0503560601_pi300-10000_pass1_cl_src16.gif
[Fri Feb 10 19:51:03 2012] Mean detx,y = (2771.44, 657.67) 
[Fri Feb 10 19:51:04 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 10 19:51:08 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 10 19:51:08 2012] Setting source spectrum file to fullrun_mos1_xmm0503560601_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Feb 10 19:51:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503560601_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri Feb 10 20:05:18 2012] Not generating rmf since there are only 34 counts
[Fri Feb 10 20:05:18 2012] rmf not generated due to insufficient counts
[Fri Feb 10 20:37:34 2012] Updating aperture counts using extracted products
[Fri Feb 10 20:37:34 2012] Error reading totcts from fullrun_mos1_xmm0503560601_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Feb 10 20:37:34 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 10 20:37:34 2012] Using photon index=1.80, rate=0.000617, arf fullrun_mos1_xmm0503560601_pi300-10000_pass1_cl_src16.arf
[Fri Feb 10 20:37:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 10 20:37:34 2012] Updating source flux to 8.7e-15
[Fri Feb 10 20:37:36 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting