[Sun Feb 12 10:27:19 2012] Detection parameters:
  Position = (322.5, 262.0) = 5 42 50.55 -8 38 28.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1392.0 +/- 48.5
  Background counts = 71.7
  Rate = 0.04 +/- 0.001

[Sun Feb 12 10:27:19 2012] Off-axis axis estimate = 3.17'
[Sun Feb 12 10:31:04 2012] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 10:31:04 2012] Initial guess for spatial extent in simple fitting = 8.01"
[Sun Feb 12 10:31:04 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.912
[Sun Feb 12 10:31:04 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 8.01"
[Sun Feb 12 11:30:42 2012] fullrun_pn_xmm0503560501_pi300-10000_cl_pass0_src4.ximg exists
[Sun Feb 12 11:30:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503560501_pi300-10000_cl_pass0_src4.csv
[Sun Feb 12 11:30:42 2012] fullrun_pn_xmm0503560501_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Feb 12 11:30:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503560501_pi300-10000_cl_pass0_src4.csv
[Sun Feb 12 11:30:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503560501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503560501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 11:30:42 2012] fullrun_pn_xmm0503560501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Feb 12 11:30:42 2012] fullrun_pn_xmm0503560501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Feb 12 11:30:42 2012] Fit fullrun_pn_xmm0503560501_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Feb 12 12:58:03 2012] Warning, spatial fit 4 centroid is now closest to src. 13
[Sun Feb 12 12:58:03 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 22.394637 pixels away
[Sun Feb 12 12:58:03 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 12:58:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 12:58:03 2012] Assessing source extent using major
[Sun Feb 12 12:58:03 2012] Source does appear to be extended
[Sun Feb 12 12:58:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 12:58:03 2012] Source is confused with source 5
[Sun Feb 12 12:58:03 2012] Source is confused with source 7
[Sun Feb 12 12:58:21 2012] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 12:58:21 2012] Initial guess for spatial extent in simple fitting = 8.01"
[Sun Feb 12 12:58:21 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.912
[Sun Feb 12 12:58:21 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 8.01"
[Sun Feb 12 13:46:48 2012] fullrun_pn_xmm0503560501_pi300-10000_cl_pass1_src4.ximg exists
[Sun Feb 12 13:46:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503560501_pi300-10000_cl_pass1_src4.csv
[Sun Feb 12 13:46:48 2012] fullrun_pn_xmm0503560501_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Feb 12 13:46:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503560501_pi300-10000_cl_pass1_src4.csv
[Sun Feb 12 13:46:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503560501_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503560501_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 13:46:49 2012] fullrun_pn_xmm0503560501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Feb 12 13:46:49 2012] fullrun_pn_xmm0503560501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Feb 12 13:46:49 2012] Fit fullrun_pn_xmm0503560501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Feb 12 15:09:16 2012] Warning, spatial fit 4 centroid is now closest to src. 7
[Sun Feb 12 15:09:16 2012] Source 4 is offset by 3.015950 and 7.496336 pixels which is larger than
2 X fitted extent = 2.317816 x 2.317816, not incorporating fit results
[Sun Feb 12 15:09:16 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 28.070431 pixels away
[Sun Feb 12 15:09:16 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 15:09:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 15:09:16 2012] Assessing source extent using major
[Sun Feb 12 15:09:16 2012] Source does appear to be extended
[Sun Feb 12 15:09:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 15:09:33 2012] Counts = 1392.022461, rescaling region sizes by 2.000000
[Sun Feb 12 15:09:33 2012] XMMSAS src. selection expression = ellipse(28005.760864, 22744.345062, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Feb 12 15:09:33 2012] Writing source region out to fullrun_pn_xmm0503560501_pi300-10000_pass1_cl_src4_src.reg
[Sun Feb 12 15:09:33 2012] Extracting stamp from image fullrun_pn_xmm0503560501_pi300-10000_cl_sm2.00.img.gz, (247, 187) - (397, 337)
[Sun Feb 12 15:09:33 2012] XMMSAS bgd. selection expression = annulus(28005.760864, 22744.345062, 4350.000000, 8700.000000, X, Y) && !ellipse(33440.348297, 22316.556122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33913.572000, 29417.641600, 450.338413, 450.338413, 0.000000, X, Y) && !ellipse(21447.091720, 27283.514000, 449.671250, 449.671250, 0.000000, X, Y) && !ellipse(28558.058000, 22793.832000, 376.592011, 376.592011, 0.000000, X, Y) && !ellipse(24017.105042, 21882.109695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27740.856000, 22191.612000, 340.060010, 340.060010, 0.000000, X, Y) && !ellipse(22021.983276, 30712.818115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27996.065200, 20979.926400, 444.865613, 444.865613, 0.000000, X, Y) && !ellipse(24922.326660, 27534.113495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28256.438110, 24302.483521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24012.181400, 29711.858800, 494.160014, 494.160014, 0.000000, X, Y) && !ellipse(29652.297400, 28616.696200, 413.814896, 413.814896, 0.000000, X, Y) && !ellipse(25659.716000, 23699.740000, 390.165611, 390.165611, 0.000000, X, Y) && !ellipse(28957.938000, 23215.938000, 747.916822, 747.916822, 0.000000, X, Y) && !ellipse(34619.757446, 28955.350677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33778.056380, 27591.791200, 397.056011, 397.056011, 0.000000, X, Y) && !ellipse(35968.987579, 24565.620819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26385.394000, 23542.606000, 1246.208036, 488.188814, 320.977000, X, Y) && !ellipse(34673.078360, 23152.804800, 628.756818, 628.756818, 0.000000, X, Y) && !ellipse(34516.511322, 22118.541382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30521.848600, 21475.926600, 651.798419, 651.798419, 0.000000, X, Y)
[Sun Feb 12 15:09:33 2012] Writing fullrun_pn_xmm0503560501_pi300-10000_pass1_cl_src4.gif
[Sun Feb 12 15:15:33 2012] Mean detx,y = (1745.56, 4290.12) 
[Sun Feb 12 15:15:40 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 15:18:56 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 15:18:57 2012] Setting source spectrum file to fullrun_pn_xmm0503560501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Feb 12 15:18:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503560501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Feb 12 15:47:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Feb 12 15:47:17 2012] rmf not generated due to insufficient counts
[Sun Feb 12 17:48:25 2012] Updating aperture counts using extracted products
[Sun Feb 12 17:48:25 2012] Error reading totcts from fullrun_pn_xmm0503560501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Feb 12 17:48:25 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 17:48:25 2012] Using photon index=1.80, rate=0.0351, arf fullrun_pn_xmm0503560501_pi300-10000_pass1_cl_src4.arf
[Sun Feb 12 17:48:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 17:48:25 2012] Updating source flux to 9.2e-14
[Sun Feb 12 17:50:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting