[Sun Feb 12 10:28:04 2012] Detection parameters:
  Position = (385.0, 257.2) = 5 42 32.21 -8 38 49.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 962.7 +/- 37.9
  Background counts = 34.8
  Rate = 0.02 +/- 0.001

[Sun Feb 12 10:28:05 2012] Off-axis axis estimate = 6.95'
[Sun Feb 12 12:18:49 2012] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 12:18:49 2012] Initial guess for spatial extent in simple fitting = 9.90"
[Sun Feb 12 12:18:49 2012] source mask rpix=2.3, npix_max = 30, mask sum = 33, frac = 1.070
[Sun Feb 12 12:18:49 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.90"
[Sun Feb 12 12:57:56 2012] fullrun_mos2_xmm0503560501_pi300-10000_cl_pass0_src3.ximg exists
[Sun Feb 12 12:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560501_pi300-10000_cl_pass0_src3.csv
[Sun Feb 12 12:57:56 2012] fullrun_mos2_xmm0503560501_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Feb 12 12:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560501_pi300-10000_cl_pass0_src3.csv
[Sun Feb 12 12:57:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503560501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503560501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:57:57 2012] fullrun_mos2_xmm0503560501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Feb 12 12:57:57 2012] fullrun_mos2_xmm0503560501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Feb 12 12:57:57 2012] Fit fullrun_mos2_xmm0503560501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Feb 12 12:58:12 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.440646 pixels away
[Sun Feb 12 12:58:12 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 12:58:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 12:58:12 2012] Assessing source extent using major
[Sun Feb 12 12:58:12 2012] Source does appear to be extended
[Sun Feb 12 12:58:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 14:29:07 2012] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 14:29:07 2012] Initial guess for spatial extent in simple fitting = 9.90"
[Sun Feb 12 14:29:07 2012] source mask rpix=2.3, npix_max = 30, mask sum = 33, frac = 1.070
[Sun Feb 12 14:29:07 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.90"
[Sun Feb 12 15:09:09 2012] fullrun_mos2_xmm0503560501_pi300-10000_cl_pass1_src3.ximg exists
[Sun Feb 12 15:09:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560501_pi300-10000_cl_pass1_src3.csv
[Sun Feb 12 15:09:09 2012] fullrun_mos2_xmm0503560501_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Feb 12 15:09:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560501_pi300-10000_cl_pass1_src3.csv
[Sun Feb 12 15:09:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503560501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503560501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 15:09:09 2012] fullrun_mos2_xmm0503560501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Feb 12 15:09:09 2012] fullrun_mos2_xmm0503560501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Feb 12 15:09:09 2012] Fit fullrun_mos2_xmm0503560501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Feb 12 15:09:24 2012] Spatial fit model total counts = 1002.090000, observed total counts = 1003.000000
[Sun Feb 12 15:09:24 2012] Offset between fit and detection position for source 7 = 0.243299 pixels
[Sun Feb 12 15:09:24 2012] 1005.571000 total counts/ 358.993000 bgd. counts: snr = 34.125414
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.243299 pixels
  Position = (384.9, 257.5) = 5 42 32.23 -8 38 48.3
  Extent = 5.6 (5.3-6.1)", rotation angle = 0
  Source counts = 646.6 +/- 31.7
  Background counts = 359.0
  Rate = 0.01 +/- 0.0006
[Sun Feb 12 15:09:24 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 15:09:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 15:09:24 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 15:09:24 2012] Source does appear to be extended
[Sun Feb 12 15:09:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 17:02:08 2012] XMMSAS src. selection expression = ellipse(33440.824980, 22351.888200, 338.539210, 338.539210, 0.000000, X, Y)
[Sun Feb 12 17:02:08 2012] Writing source region out to fullrun_mos2_xmm0503560501_pi300-10000_pass1_cl_src7_src.reg
[Sun Feb 12 17:02:08 2012] Extracting stamp from image fullrun_mos2_xmm0503560501_pi300-10000_cl_sm2.00.img.gz, (365, 238) - (404, 277)
[Sun Feb 12 17:02:08 2012] XMMSAS bgd. selection expression = annulus(33440.824980, 22351.888200, 564.232016, 1128.464032, X, Y)
[Sun Feb 12 17:02:08 2012] Writing fullrun_mos2_xmm0503560501_pi300-10000_pass1_cl_src7.gif
[Sun Feb 12 17:02:41 2012] Mean detx,y = (-6969.48, -3303.11) 
[Sun Feb 12 17:02:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 17:02:53 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 17:02:53 2012] Setting source spectrum file to fullrun_mos2_xmm0503560501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Feb 12 17:02:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503560501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Feb 12 17:48:26 2012] Updating aperture counts using extracted products
[Sun Feb 12 17:48:26 2012] Error reading totcts from fullrun_mos2_xmm0503560501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Feb 12 17:48:26 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 17:48:26 2012] Using photon index=1.80, rate=0.0131, arf fullrun_mos2_xmm0503560501_pi300-10000_pass1_cl_src7.arf
[Sun Feb 12 17:48:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 17:48:26 2012] Updating source flux to 2.2e-13