[Sun Feb 12 10:28:05 2012] Detection parameters:
  Position = (341.6, 406.2) = 5 42 44.96 -8 27 58.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.2 +/- 12.2
  Background counts = 30.7
  Rate = 0.002 +/- 0.0004

[Sun Feb 12 10:28:05 2012] Off-axis axis estimate = 8.42'
[Sun Feb 12 12:18:49 2012] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 12:18:49 2012] Initial guess for spatial extent in simple fitting = 10.64"
[Sun Feb 12 12:18:49 2012] source mask rpix=2.4, npix_max = 34, mask sum = 29, frac = 0.836
[Sun Feb 12 12:18:49 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 10.64"
[Sun Feb 12 12:57:56 2012] fullrun_mos2_xmm0503560501_pi300-10000_cl_pass0_src19.ximg exists
[Sun Feb 12 12:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560501_pi300-10000_cl_pass0_src19.csv
[Sun Feb 12 12:57:56 2012] fullrun_mos2_xmm0503560501_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Feb 12 12:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560501_pi300-10000_cl_pass0_src19.csv
[Sun Feb 12 12:57:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503560501_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503560501_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:57:57 2012] fullrun_mos2_xmm0503560501_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Feb 12 12:57:57 2012] fullrun_mos2_xmm0503560501_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Feb 12 12:57:57 2012] Fit fullrun_mos2_xmm0503560501_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sun Feb 12 12:58:12 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 14.013891 pixels away
[Sun Feb 12 12:58:12 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 12:58:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 12:58:12 2012] Assessing source extent using major
[Sun Feb 12 12:58:12 2012] Source does appear to be extended
[Sun Feb 12 12:58:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 14:29:07 2012] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 14:29:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 12 14:29:07 2012] Initial guess for spatial extent in simple fitting = 10.64"
[Sun Feb 12 14:29:07 2012] source mask rpix=2.4, npix_max = 34, mask sum = 29, frac = 0.836
[Sun Feb 12 14:29:07 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 10.64"
[Sun Feb 12 15:09:09 2012] fullrun_mos2_xmm0503560501_pi300-10000_cl_pass1_src19.ximg exists
[Sun Feb 12 15:09:09 2012] fullrun_mos2_xmm0503560501_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun Feb 12 15:09:09 2012] Fit fullrun_mos2_xmm0503560501_pi300-10000_cl_pass1_src19 appears to have run properly
[Sun Feb 12 15:09:09 2012] fullrun_mos2_xmm0503560501_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun Feb 12 15:09:09 2012] fullrun_mos2_xmm0503560501_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Feb 12 15:09:09 2012] Fit fullrun_mos2_xmm0503560501_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sun Feb 12 15:09:24 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 14.013891 pixels away
[Sun Feb 12 15:09:24 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 15:09:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 15:09:24 2012] Assessing source extent using major
[Sun Feb 12 15:09:24 2012] Source does appear to be extended
[Sun Feb 12 15:09:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 17:02:09 2012] XMMSAS src. selection expression = ellipse(29666.723297, 35293.842834, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 12 17:02:09 2012] Writing source region out to fullrun_mos2_xmm0503560501_pi300-10000_pass1_cl_src20_src.reg
[Sun Feb 12 17:02:09 2012] Extracting stamp from image fullrun_mos2_xmm0503560501_pi300-10000_cl_sm2.00.img.gz, (304, 369) - (379, 444)
[Sun Feb 12 17:02:09 2012] XMMSAS bgd. selection expression = annulus(29666.723297, 35293.842834, 1087.500000, 2175.000000, X, Y) && !ellipse(31309.772400, 37182.556800, 434.839213, 434.839213, 0.000000, X, Y)
[Sun Feb 12 17:02:09 2012] Writing fullrun_mos2_xmm0503560501_pi300-10000_pass1_cl_src20.gif
[Sun Feb 12 17:06:27 2012] Mean detx,y = (-283.84, 8399.31) 
[Sun Feb 12 17:06:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 17:06:59 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 17:06:59 2012] Setting source spectrum file to fullrun_mos2_xmm0503560501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Feb 12 17:06:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503560501_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sun Feb 12 17:46:27 2012] Not generating rmf since there are only 63 counts
[Sun Feb 12 17:46:27 2012] rmf not generated due to insufficient counts
[Sun Feb 12 17:48:26 2012] Updating aperture counts using extracted products
[Sun Feb 12 17:48:26 2012] Error reading totcts from fullrun_mos2_xmm0503560501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Feb 12 17:48:27 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 17:48:27 2012] Using photon index=1.80, rate=0.00216, arf fullrun_mos2_xmm0503560501_pi300-10000_pass1_cl_src20.arf
[Sun Feb 12 17:48:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 17:48:27 2012] Updating source flux to 4.1e-14
[Sun Feb 12 17:49:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting