[Mon May  7 18:40:32 2012] Detection parameters:
  Position = (402.0, 308.0) = 5 39 58.16 -7 37 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 803.4 +/- 34.9
  Background counts = 26.1
  Rate = 0.01 +/- 0.0006

[Mon May  7 18:40:34 2012] Off-axis axis estimate = 7.54'
[Mon May  7 21:06:00 2012] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Mon May  7 21:06:00 2012] Initial guess for spatial extent in simple fitting = 10.20"
[Mon May  7 21:06:00 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.112
[Mon May  7 21:06:00 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.20"
[Mon May  7 22:24:26 2012] fullrun_mos1_xmm0503560401_pi300-10000_cl_pass0_src4.ximg exists
[Mon May  7 22:24:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503560401_pi300-10000_cl_pass0_src4.csv
[Mon May  7 22:24:26 2012] fullrun_mos1_xmm0503560401_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon May  7 22:24:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503560401_pi300-10000_cl_pass0_src4.csv
[Mon May  7 22:24:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503560401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503560401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 22:24:26 2012] fullrun_mos1_xmm0503560401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon May  7 22:24:26 2012] fullrun_mos1_xmm0503560401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon May  7 22:24:26 2012] Fit fullrun_mos1_xmm0503560401_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon May  7 23:59:29 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.315558 pixels away
[Mon May  7 23:59:30 2012] Vigneting correction estimate = 1.000000
[Mon May  7 23:59:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 23:59:30 2012] Assessing source extent using major
[Mon May  7 23:59:30 2012] Source does appear to be extended
[Mon May  7 23:59:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 23:59:30 2012] Source is confused with source 2
[Tue May  8 01:37:36 2012] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Tue May  8 01:37:36 2012] Initial guess for spatial extent in simple fitting = 10.20"
[Tue May  8 01:37:36 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.112
[Tue May  8 01:37:36 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 10.20"
[Tue May  8 02:47:04 2012] fullrun_mos1_xmm0503560401_pi300-10000_cl_pass1_src4.ximg exists
[Tue May  8 02:47:04 2012] fullrun_mos1_xmm0503560401_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue May  8 02:47:04 2012] Fit fullrun_mos1_xmm0503560401_pi300-10000_cl_pass1_src4 appears to have run properly
[Tue May  8 02:47:05 2012] fullrun_mos1_xmm0503560401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue May  8 02:47:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503560401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue May  8 02:47:05 2012] fullrun_mos1_xmm0503560401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue May  8 02:47:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503560401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue May  8 02:47:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503560401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503560401_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 04:36:12 2012] Spatial fit model total counts = 1580.800000, observed total counts = 1619.000000
[Tue May  8 04:36:12 2012] Offset between fit and detection position for source 5 = 2.047676 pixels
[Tue May  8 04:36:12 2012] 1542.484000 total counts/ 605.906000 bgd. counts: snr = 38.048832
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.047676 pixels
  Position = (400.5, 306.6) = 5 39 58.60 -7 37 20.0
  Extent = 10.2" x 6.6", rotation angle = 307
  Source counts = 936.6 +/- 39.3
  Background counts = 605.9
  Rate = 0.02 +/- 0.0007
[Tue May  8 04:36:12 2012] Vigneting correction estimate = 1.000000
[Tue May  8 04:36:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 04:36:12 2012] Assessing source extent using major
[Tue May  8 04:36:12 2012] Source does appear to be extended
[Tue May  8 04:36:12 2012] Computing asymmetry using major and minor axis, asym = 1.54
[Tue May  8 04:36:12 2012] Source is asymmetric
[Tue May  8 07:04:55 2012] XMMSAS src. selection expression = ellipse(34797.355800, 26622.507000, 614.640018, 398.205611, 306.675843, X, Y)
[Tue May  8 07:04:55 2012] Writing source region out to fullrun_mos1_xmm0503560401_pi300-10000_pass1_cl_src5_src.reg
[Tue May  8 07:04:55 2012] Extracting stamp from image fullrun_mos1_xmm0503560401_pi300-10000_cl_sm2.00.img.gz, (365, 271) - (436, 342)
[Tue May  8 07:04:55 2012] XMMSAS bgd. selection expression = annulus(34797.355800, 26622.507000, 1024.400029, 2048.800059, X, Y) && !ellipse(34756.322400, 26551.552400, 1005.048029, 1005.048029, 0.000000, X, Y)
[Tue May  8 07:04:55 2012] Writing fullrun_mos1_xmm0503560401_pi300-10000_pass1_cl_src5.gif
[Tue May  8 07:13:58 2012] Mean detx,y = (-3724.32, -9948.86) 
[Tue May  8 07:14:01 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 07:14:21 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 07:14:21 2012] Setting source spectrum file to fullrun_mos1_xmm0503560401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue May  8 07:14:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503560401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue May  8 09:49:16 2012] Updating aperture counts using extracted products
[Tue May  8 09:49:16 2012] Error reading totcts from fullrun_mos1_xmm0503560401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue May  8 09:49:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 09:49:18 2012] Using photon index=1.80, rate=0.0163, arf fullrun_mos1_xmm0503560401_pi300-10000_pass1_cl_src5.arf
[Tue May  8 09:49:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 09:49:18 2012] Updating source flux to 3.3e-13
[Tue May  8 09:49:26 2012] Flag c found in src. 5 procflags, skipping spectral fitting