[Mon May  7 18:40:31 2012] Detection parameters:
  Position = (133.2, 228.0) = 5 41 16.84 -7 43 1.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 855.5 +/- 35.2
  Background counts = 25.3
  Rate = 0.01 +/- 0.0006

[Mon May  7 18:40:34 2012] Off-axis axis estimate = 13.03'
[Mon May  7 21:06:00 2012] Using EEF radius (= 12.94 ")to estimate initial spatial extent for simple fitting
[Mon May  7 21:06:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  7 21:06:00 2012] Initial guess for spatial extent in simple fitting = 12.94"
[Mon May  7 21:06:00 2012] source mask rpix=3.0, npix_max = 48, mask sum = 35, frac = 0.725
[Mon May  7 21:06:00 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.94"
[Mon May  7 22:24:26 2012] fullrun_mos1_xmm0503560401_pi300-10000_cl_pass0_src3.ximg exists
[Mon May  7 22:24:26 2012] fullrun_mos1_xmm0503560401_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon May  7 22:24:26 2012] Fit fullrun_mos1_xmm0503560401_pi300-10000_cl_pass0_src3 appears to have run properly
[Mon May  7 22:24:26 2012] fullrun_mos1_xmm0503560401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon May  7 22:24:26 2012] fullrun_mos1_xmm0503560401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May  7 22:24:26 2012] Fit fullrun_mos1_xmm0503560401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon May  7 23:59:29 2012] Spatial fit model total counts = 1135.020000, observed total counts = 1117.000000
[Mon May  7 23:59:29 2012] Offset between fit and detection position for source 1 = 0.158769 pixels
[Mon May  7 23:59:29 2012] 1050.561000 total counts/ 477.054000 bgd. counts: snr = 26.257595
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.158769 pixels
  Position = (133.2, 228.2) = 5 41 16.83 -7 43 0.9
  Extent = 6.3" x 3.9", rotation angle = 74
  Source counts = 573.5 +/- 32.4
  Background counts = 477.1
  Rate = 0.01 +/- 0.0006
[Mon May  7 23:59:30 2012] Vigneting correction estimate = 1.000000
[Mon May  7 23:59:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 23:59:30 2012] Assessing source extent using major
[Mon May  7 23:59:30 2012] Source does appear to be extended
[Mon May  7 23:59:30 2012] Computing asymmetry using major and minor axis, asym = 1.61
[Mon May  7 23:59:30 2012] Source is asymmetric
[Tue May  8 01:37:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  8 01:37:36 2012] Initial guess for spatial extent in simple fitting = 5.12"
[Tue May  8 01:37:36 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.066
[Tue May  8 01:37:36 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.12"
[Tue May  8 02:47:04 2012] fullrun_mos1_xmm0503560401_pi300-10000_cl_pass1_src3.ximg exists
[Tue May  8 02:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503560401_pi300-10000_cl_pass1_src3.csv
[Tue May  8 02:47:04 2012] fullrun_mos1_xmm0503560401_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue May  8 02:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503560401_pi300-10000_cl_pass1_src3.csv
[Tue May  8 02:47:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503560401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503560401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 02:47:05 2012] fullrun_mos1_xmm0503560401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue May  8 02:47:05 2012] fullrun_mos1_xmm0503560401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue May  8 02:47:05 2012] Fit fullrun_mos1_xmm0503560401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue May  8 04:36:12 2012] Spatial fit model total counts = 1096.020000, observed total counts = 1027.000000
[Tue May  8 04:36:12 2012] Offset between fit and detection position for source 1 = 0.152047 pixels
[Tue May  8 04:36:12 2012] 1082.622000 total counts/ 450.820000 bgd. counts: snr = 29.756333
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.152047 pixels
  Position = (133.3, 228.2) = 5 41 16.78 -7 43 0.8
  Extent = 5.5 (5.1-6.0)", rotation angle = 0
  Source counts = 631.8 +/- 32.9
  Background counts = 450.8
  Rate = 0.01 +/- 0.0006
[Tue May  8 04:36:12 2012] Vigneting correction estimate = 1.000000
[Tue May  8 04:36:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 04:36:12 2012] Assessing source extent using major axis lower bound
[Tue May  8 04:36:12 2012] Source does appear to be extended
[Tue May  8 04:36:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 07:04:55 2012] XMMSAS src. selection expression = ellipse(11552.533200, 19803.721800, 331.125010, 331.125010, 0.000000, X, Y)
[Tue May  8 07:04:55 2012] Writing source region out to fullrun_mos1_xmm0503560401_pi300-10000_pass1_cl_src1_src.reg
[Tue May  8 07:04:55 2012] Extracting stamp from image fullrun_mos1_xmm0503560401_pi300-10000_cl_sm2.00.img.gz, (114, 209) - (152, 247)
[Tue May  8 07:04:55 2012] XMMSAS bgd. selection expression = annulus(11552.533200, 19803.721800, 551.875016, 1103.750032, X, Y)
[Tue May  8 07:04:55 2012] Writing fullrun_mos1_xmm0503560401_pi300-10000_pass1_cl_src1.gif
[Tue May  8 07:13:24 2012] Mean detx,y = (7314.25, 11601.88) 
[Tue May  8 07:13:27 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 07:13:46 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 07:13:47 2012] Setting source spectrum file to fullrun_mos1_xmm0503560401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May  8 07:13:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503560401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May  8 09:49:16 2012] Updating aperture counts using extracted products
[Tue May  8 09:49:16 2012] Error reading totcts from fullrun_mos1_xmm0503560401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May  8 09:49:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 09:49:18 2012] Using photon index=1.80, rate=0.011, arf fullrun_mos1_xmm0503560401_pi300-10000_pass1_cl_src1.arf
[Tue May  8 09:49:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 09:49:18 2012] Updating source flux to 2.6e-13