[Wed Dec 21 11:00:30 2011] Detection parameters: Position = (491.3, 338.2) = 5 38 33.66 -7 17 3.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 876.2 +/- 40.2 Background counts = 111.8 Rate = 0.02 +/- 0.0007 [Wed Dec 21 11:00:32 2011] Off-axis axis estimate = 14.27' [Wed Dec 21 11:09:05 2011] Using EEF radius (= 13.57 ")to estimate initial spatial extent for simple fitting [Wed Dec 21 11:09:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Dec 21 11:09:05 2011] Initial guess for spatial extent in simple fitting = 13.57" [Wed Dec 21 11:09:05 2011] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.936 [Wed Dec 21 11:09:05 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 13.57" [Wed Dec 21 12:11:55 2011] fullrun_pn_xmm0503560101_pi300-10000_cl_pass0_src1.ximg exists [Wed Dec 21 12:11:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503560101_pi300-10000_cl_pass0_src1.csv [Wed Dec 21 12:11:55 2011] fullrun_pn_xmm0503560101_pi300-10000_cl_pass0_src1_1.ximg exists [Wed Dec 21 12:11:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503560101_pi300-10000_cl_pass0_src1.csv [Wed Dec 21 12:11:55 2011] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0503560101_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0503560101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Dec 21 12:11:55 2011] fullrun_pn_xmm0503560101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Wed Dec 21 12:11:55 2011] fullrun_pn_xmm0503560101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Wed Dec 21 12:11:55 2011] Fit fullrun_pn_xmm0503560101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Wed Dec 21 14:00:21 2011] Spatial fit model total counts = 1892.010000, observed total counts = 1899.000000 [Wed Dec 21 14:00:21 2011] Offset between fit and detection position for source 1 = 0.300460 pixels [Wed Dec 21 14:00:21 2011] 1828.202000 total counts/ 1214.070000 bgd. counts: snr = 17.625436 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.300460 pixels Position = (491.1, 338.4) = 5 38 33.70 -7 17 3.4 Extent = 9.5 (8.5-10.4)", rotation angle = 0 Source counts = 614.1 +/- 42.8 Background counts = 1214.1 Rate = 0.01 +/- 0.0009 [Wed Dec 21 14:00:21 2011] Vigneting correction estimate = 1.000000 [Wed Dec 21 14:00:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Dec 21 14:00:21 2011] Assessing source extent using major axis lower bound [Wed Dec 21 14:00:21 2011] Source does appear to be extended [Wed Dec 21 14:00:21 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Dec 21 14:00:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Dec 21 14:00:48 2011] Initial guess for spatial extent in simple fitting = 9.53" [Wed Dec 21 14:00:48 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.036 [Wed Dec 21 14:00:48 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 9.53" [Wed Dec 21 14:53:03 2011] fullrun_pn_xmm0503560101_pi300-10000_cl_pass1_src1.ximg exists [Wed Dec 21 14:53:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503560101_pi300-10000_cl_pass1_src1.csv [Wed Dec 21 14:53:03 2011] fullrun_pn_xmm0503560101_pi300-10000_cl_pass1_src1_1.ximg exists [Wed Dec 21 14:53:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503560101_pi300-10000_cl_pass1_src1.csv [Wed Dec 21 14:53:03 2011] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0503560101_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0503560101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Dec 21 14:53:03 2011] fullrun_pn_xmm0503560101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Wed Dec 21 14:53:03 2011] fullrun_pn_xmm0503560101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Wed Dec 21 14:53:04 2011] Fit fullrun_pn_xmm0503560101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Wed Dec 21 16:21:49 2011] Spatial fit model total counts = 1339.250000, observed total counts = 1341.000000 [Wed Dec 21 16:21:49 2011] Offset between fit and detection position for source 1 = 0.097697 pixels [Wed Dec 21 16:21:49 2011] 1307.831000 total counts/ 814.712000 bgd. counts: snr = 17.276258 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.097697 pixels Position = (491.0, 338.4) = 5 38 33.73 -7 17 3.4 Extent = 7.7 (6.8-8.6)", rotation angle = 0 Source counts = 493.1 +/- 36.2 Background counts = 814.7 Rate = 0.01 +/- 0.0008 [Wed Dec 21 16:21:49 2011] Vigneting correction estimate = 1.000000 [Wed Dec 21 16:21:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Dec 21 16:21:49 2011] Assessing source extent using major axis lower bound [Wed Dec 21 16:21:49 2011] Source does appear to be extended [Wed Dec 21 16:21:49 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Dec 21 16:22:13 2011] XMMSAS src. selection expression = ellipse(42668.814666, 29394.810000, 461.088013, 461.088013, 0.000000, X, Y) [Wed Dec 21 16:22:13 2011] Writing source region out to fullrun_pn_xmm0503560101_pi300-10000_pass1_cl_src1_src.reg [Wed Dec 21 16:22:13 2011] Extracting stamp from image fullrun_pn_xmm0503560101_pi300-10000_cl_sm2.00.img.gz, (465, 312) - (518, 365) [Wed Dec 21 16:22:13 2011] XMMSAS bgd. selection expression = annulus(42668.814666, 29394.810000, 768.480022, 1536.960044, X, Y) [Wed Dec 21 16:22:13 2011] Writing fullrun_pn_xmm0503560101_pi300-10000_pass1_cl_src1.gif [Wed Dec 21 16:22:48 2011] Mean detx,y = (-16644.85, 8518.75) [Wed Dec 21 16:22:54 2011] Setting backscal keywords in source and bgd. spectrum [Wed Dec 21 16:23:31 2011] Binned source spectrum to 10 counts/bin [Wed Dec 21 16:23:32 2011] Setting source spectrum file to fullrun_pn_xmm0503560101_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Wed Dec 21 16:23:32 2011] Setting bgd. spectrum file to fullrun_pn_xmm0503560101_pi300-10000_pass1_cl_src1_bgd.pi.gz [Wed Dec 21 19:13:06 2011] Updating aperture counts using extracted products [Wed Dec 21 19:13:06 2011] Error reading totcts from fullrun_pn_xmm0503560101_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Wed Dec 21 19:13:07 2011] Calculating source flux in energy range 0.30-8.00 [Wed Dec 21 19:13:07 2011] Using photon index=1.80, rate=0.0109, arf fullrun_pn_xmm0503560101_pi300-10000_pass1_cl_src1.arf [Wed Dec 21 19:13:07 2011] Assuming count rate is from the 0.30-10.00 bandpass [Wed Dec 21 19:13:07 2011] Updating source flux to 1.1e-13 [Wed Dec 21 19:18:41 2011] Reading fit data from xmm0503560101/analysis//spectral/fullrun_pn_xmm0503560101_pi300-10000_pass1_cl_src1_pl.csv [Wed Dec 21 19:18:41 2011] Spectral fit parameter nH value = 3.93967e+21 [Wed Dec 21 19:18:41 2011] Spectral fit parameter PhoIndex value = 4.66223 [Wed Dec 21 19:18:41 2011] Failed to get F(0.3-8.0) from xmm0503560101/analysis//spectral/fullrun_pn_xmm0503560101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Wed Dec 21 19:18:41 2011] Calculating source flux in energy range 0.30-8.00 [Wed Dec 21 19:18:41 2011] Using Nh = 3.9e+21, photon index=4.66, rate=0.0109, arf fullrun_pn_xmm0503560101_pi300-10000_pass1_cl_src1.arf [Wed Dec 21 19:18:41 2011] Assuming count rate is from the 0.30-10.00 bandpass [Wed Dec 21 19:18:41 2011] Updating source flux to 6.6e-14