[Fri Dec 23 17:06:43 2011] Detection parameters:
  Position = (338.3, 96.5) = 17 42 9.49 -39 14 57.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.3 +/- 22.5
  Background counts = 120.6
  Rate = 0.002 +/- 0.0004

[Fri Dec 23 17:06:43 2011] Off-axis axis estimate = 14.92'
[Fri Dec 23 17:15:42 2011] Using EEF radius (= 13.89 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 17:15:42 2011] Initial guess for spatial extent in simple fitting = 13.89"
[Fri Dec 23 17:15:42 2011] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.898
[Fri Dec 23 17:15:42 2011] Giving source the simple spatial ID 42 for pass 0, mean size = 13.89"
[Fri Dec 23 18:46:22 2011] fullrun_pn_xmm0503500201_pi300-10000_cl_pass0_src42.ximg exists
[Fri Dec 23 18:46:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503500201_pi300-10000_cl_pass0_src42.csv
[Fri Dec 23 18:46:22 2011] fullrun_pn_xmm0503500201_pi300-10000_cl_pass0_src42_1.ximg exists
[Fri Dec 23 18:46:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503500201_pi300-10000_cl_pass0_src42.csv
[Fri Dec 23 18:46:22 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503500201_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503500201_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 18:46:23 2011] fullrun_pn_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Fri Dec 23 18:46:23 2011] fullrun_pn_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Fri Dec 23 18:46:23 2011] Fit fullrun_pn_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Fri Dec 23 20:21:28 2011] Spatial fit model total counts = 1154.160000, observed total counts = 1199.000000
[Fri Dec 23 20:21:28 2011] Offset between fit and detection position for source 43 = 4.638630 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 4.638630 pixels
  Position = (342.9, 96.1) = 17 42 7.76 -39 14 59.4
  Extent = 27.8 (27.7-55.6)", rotation angle = 0
  Source counts = 1164.6 +/- 34.1
  Background counts = 0.0
  Rate = 0.02 +/- 0.0007
 Deleting source due to low signal-to-noise ratio