[Fri Dec 23 17:08:15 2011] Detection parameters:
  Position = (322.1, 228.0) = 17 42 15.55 -39 5 26.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.8 +/- 16.9
  Background counts = 63.8
  Rate = 0.002 +/- 0.0004

[Fri Dec 23 17:08:15 2011] Off-axis axis estimate = 5.39'
[Fri Dec 23 19:29:53 2011] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 19:29:53 2011] Initial guess for spatial extent in simple fitting = 9.12"
[Fri Dec 23 19:29:53 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.112
[Fri Dec 23 19:29:53 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 9.12"
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src13.ximg exists
[Fri Dec 23 20:21:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src13.csv
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Dec 23 20:21:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src13.csv
[Fri Dec 23 20:21:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Dec 23 20:21:14 2011] Fit fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Dec 23 20:21:41 2011] Warning, spatial fit 13 centroid is now closest to src. 5
[Fri Dec 23 20:21:41 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 20:21:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 20:21:41 2011] Assessing source extent using major
[Fri Dec 23 20:21:41 2011] Source does appear to be extended
[Fri Dec 23 20:21:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 22:30:46 2011] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 22:30:46 2011] Initial guess for spatial extent in simple fitting = 9.12"
[Fri Dec 23 22:30:46 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.112
[Fri Dec 23 22:30:46 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 9.12"
[Fri Dec 23 23:38:05 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src13.ximg exists
[Fri Dec 23 23:38:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src13.csv
[Fri Dec 23 23:38:05 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Dec 23 23:38:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src13.csv
[Fri Dec 23 23:38:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 23:38:05 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Dec 23 23:38:05 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Dec 23 23:38:05 2011] Fit fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Dec 23 23:38:34 2011] Source 26 is offset by -7.577125 and -2.242153 pixels which is larger than
2 X fitted extent = 2.181044 x 2.181044, not incorporating fit results
[Fri Dec 23 23:38:34 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 23:38:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 23:38:34 2011] Assessing source extent using major
[Fri Dec 23 23:38:34 2011] Source does appear to be extended
[Fri Dec 23 23:38:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 02:56:34 2011] XMMSAS src. selection expression = ellipse(27978.544159, 19787.879669, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 24 02:56:34 2011] Writing source region out to fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src26_src.reg
[Sat Dec 24 02:56:34 2011] Extracting stamp from image fullrun_mos2_xmm0503500201_pi300-10000_cl_sm2.00.img.gz, (285, 191) - (360, 266)
[Sat Dec 24 02:56:34 2011] XMMSAS bgd. selection expression = annulus(27978.544159, 19787.879669, 1087.500000, 2175.000000, X, Y) && !ellipse(28616.571200, 19991.944600, 539.582416, 339.861610, 341.229000, X, Y) && !ellipse(24944.046400, 20297.518400, 1400.936040, 1400.936040, 0.000000, X, Y)
[Sat Dec 24 02:56:34 2011] Writing fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src26.gif
[Sat Dec 24 03:04:02 2011] Mean detx,y = (3353.71, 4477.60) 
[Sat Dec 24 03:04:05 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 24 03:04:45 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 24 03:04:46 2011] Setting source spectrum file to fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Dec 24 03:04:46 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sat Dec 24 03:47:00 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 24 03:47:00 2011] rmf not generated due to insufficient counts
[Sat Dec 24 04:05:55 2011] Updating aperture counts using extracted products
[Sat Dec 24 04:05:55 2011] Error reading totcts from fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Dec 24 04:05:56 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 04:05:56 2011] Using photon index=1.80, rate=0.00233, arf fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src26.arf
[Sat Dec 24 04:05:56 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 04:05:57 2011] Updating source flux to 3.8e-14
[Sat Dec 24 04:06:57 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting