[Fri Dec 23 17:08:15 2011] Detection parameters:
  Position = (287.8, 235.1) = 17 42 28.40 -39 4 53.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.3 +/- 14.9
  Background counts = 64.9
  Rate = 0.002 +/- 0.0003

[Fri Dec 23 17:08:15 2011] Off-axis axis estimate = 4.65'
[Fri Dec 23 19:29:53 2011] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 19:29:53 2011] Initial guess for spatial extent in simple fitting = 8.76"
[Fri Dec 23 19:29:53 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.990
[Fri Dec 23 19:29:53 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 8.76"
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src21.ximg exists
[Fri Dec 23 20:21:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src21.csv
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri Dec 23 20:21:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src21.csv
[Fri Dec 23 20:21:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Dec 23 20:21:14 2011] Fit fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Fri Dec 23 20:21:41 2011] Spatial fit model total counts = 390.433000, observed total counts = 391.000000
[Fri Dec 23 20:21:41 2011] Offset between fit and detection position for source 23 = 1.357671 pixels
[Fri Dec 23 20:21:41 2011] 402.071000 total counts/ 158.463000 bgd. counts: snr = 19.352078
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.357671 pixels
  Position = (287.3, 233.9) = 17 42 28.58 -39 5 0.1
  Extent = 17.5 (17.2-35.0)", rotation angle = 0
  Source counts = 243.6 +/- 20.1
  Background counts = 158.5
  Rate = 0.004 +/- 0.0003
[Fri Dec 23 20:21:41 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 20:21:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 20:21:41 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 20:21:41 2011] Source does appear to be extended
[Fri Dec 23 20:21:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 22:30:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 23 22:30:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 23 22:30:46 2011] Initial guess for spatial extent in simple fitting = 17.51"
[Fri Dec 23 22:30:46 2011] source mask rpix=4.0, npix_max = 81, mask sum = 81, frac = 0.989
[Fri Dec 23 22:30:46 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 17.51"
[Fri Dec 23 23:38:05 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src21.ximg exists
[Fri Dec 23 23:38:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src21.csv
[Fri Dec 23 23:38:05 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src21_1.ximg exists
[Fri Dec 23 23:38:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src21.csv
[Fri Dec 23 23:38:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 23:38:05 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Fri Dec 23 23:38:05 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Fri Dec 23 23:38:05 2011] Fit fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Fri Dec 23 23:38:34 2011] Warning, spatial fit 21 centroid is now closest to src. 24
[Fri Dec 23 23:38:34 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 23:38:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 23:38:34 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 23:38:34 2011] Source does appear to be extended
[Fri Dec 23 23:38:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 02:56:34 2011] XMMSAS src. selection expression = ellipse(24944.046400, 20297.518400, 1050.702030, 1050.702030, 0.000000, X, Y)
[Sat Dec 24 02:56:34 2011] Writing source region out to fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src23_src.reg
[Sat Dec 24 02:56:34 2011] Extracting stamp from image fullrun_mos2_xmm0503500201_pi300-10000_cl_sm2.00.img.gz, (227, 173) - (348, 294)
[Sat Dec 24 02:56:34 2011] XMMSAS bgd. selection expression = annulus(24944.046400, 20297.518400, 1751.170050, 3502.340101, X, Y) && !ellipse(24809.160600, 24140.875000, 450.002413, 381.400011, 8.814660, X, Y) && !ellipse(28616.571200, 19991.944600, 539.582416, 339.861610, 341.229000, X, Y) && !ellipse(22392.906799, 20497.726974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27978.544159, 19787.879669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27029.875641, 16647.370300, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 24 02:56:34 2011] Writing fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src23.gif
[Sat Dec 24 03:08:59 2011] Mean detx,y = (248.21, 3974.81) 
[Sat Dec 24 03:09:04 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 24 03:10:10 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 24 03:10:10 2011] Setting source spectrum file to fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Dec 24 03:10:10 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat Dec 24 04:05:55 2011] Updating aperture counts using extracted products
[Sat Dec 24 04:05:56 2011] Error reading totcts from fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Dec 24 04:05:57 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 04:05:57 2011] Using photon index=1.80, rate=0.00413, arf fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src23.arf
[Sat Dec 24 04:05:57 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 04:05:57 2011] Updating source flux to 5.9e-14