[Fri Dec 23 17:08:15 2011] Detection parameters:
  Position = (192.6, 254.2) = 17 43 3.94 -39 3 30.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.2 +/- 17.9
  Background counts = 61.4
  Rate = 0.003 +/- 0.0004

[Fri Dec 23 17:08:15 2011] Off-axis axis estimate = 8.32'
[Fri Dec 23 19:29:53 2011] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 19:29:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 23 19:29:53 2011] Initial guess for spatial extent in simple fitting = 10.59"
[Fri Dec 23 19:29:53 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.046
[Fri Dec 23 19:29:53 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 10.59"
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src6.ximg exists
[Fri Dec 23 20:21:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src6.csv
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Dec 23 20:21:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src6.csv
[Fri Dec 23 20:21:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Dec 23 20:21:14 2011] Fit fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Dec 23 20:21:41 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 14.587189 pixels away
[Fri Dec 23 20:21:41 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 20:21:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 20:21:41 2011] Assessing source extent using major
[Fri Dec 23 20:21:41 2011] Source does appear to be extended
[Fri Dec 23 20:21:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 22:30:46 2011] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 22:30:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 23 22:30:46 2011] Initial guess for spatial extent in simple fitting = 10.59"
[Fri Dec 23 22:30:46 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.046
[Fri Dec 23 22:30:46 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 10.59"
[Fri Dec 23 23:38:04 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src6.ximg exists
[Fri Dec 23 23:38:04 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Dec 23 23:38:04 2011] Fit fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src6 appears to have run properly
[Fri Dec 23 23:38:05 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Dec 23 23:38:05 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Dec 23 23:38:05 2011] Fit fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Dec 23 23:38:34 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 12.795540 pixels away
[Fri Dec 23 23:38:34 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 23:38:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 23:38:34 2011] Assessing source extent using major
[Fri Dec 23 23:38:34 2011] Source does appear to be extended
[Fri Dec 23 23:38:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 02:56:34 2011] XMMSAS src. selection expression = ellipse(16707.476181, 22068.865784, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 24 02:56:34 2011] Writing source region out to fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src22_src.reg
[Sat Dec 24 02:56:34 2011] Extracting stamp from image fullrun_mos2_xmm0503500201_pi300-10000_cl_sm2.00.img.gz, (155, 217) - (230, 292)
[Sat Dec 24 02:56:34 2011] XMMSAS bgd. selection expression = annulus(16707.476181, 22068.865784, 1087.500000, 2175.000000, X, Y)
[Sat Dec 24 02:56:34 2011] Writing fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src22.gif
[Sat Dec 24 02:59:51 2011] Mean detx,y = (-8032.44, 2152.66) 
[Sat Dec 24 02:59:54 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 24 03:00:23 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 24 03:00:24 2011] Setting source spectrum file to fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Dec 24 03:00:24 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sat Dec 24 03:45:50 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 24 03:45:50 2011] rmf not generated due to insufficient counts
[Sat Dec 24 04:05:54 2011] Updating aperture counts using extracted products
[Sat Dec 24 04:05:54 2011] Error reading totcts from fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Dec 24 04:05:56 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 04:05:56 2011] Using photon index=1.80, rate=0.00332, arf fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src22.arf
[Sat Dec 24 04:05:56 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 04:05:56 2011] Updating source flux to 5.9e-14
[Sat Dec 24 04:06:57 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting