[Fri Dec 23 17:08:15 2011] Detection parameters:
  Position = (271.3, 316.5) = 17 42 34.53 -38 59 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.7 +/- 15.5
  Background counts = 64.6
  Rate = 0.001 +/- 0.0003

[Fri Dec 23 17:08:15 2011] Off-axis axis estimate = 2.36'
[Fri Dec 23 19:29:53 2011] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 19:29:53 2011] Initial guess for spatial extent in simple fitting = 7.61"
[Fri Dec 23 19:29:53 2011] source mask rpix=1.7, npix_max = 20, mask sum = 25, frac = 1.235
[Fri Dec 23 19:29:53 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 7.61"
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src23.ximg exists
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Dec 23 20:21:14 2011] Fit fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src23 appears to have run properly
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Dec 23 20:21:14 2011] Fit fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Dec 23 20:21:41 2011] Spatial fit model total counts = 404.515000, observed total counts = 405.000000
[Fri Dec 23 20:21:41 2011] Offset between fit and detection position for source 17 = 0.219473 pixels
[Fri Dec 23 20:21:41 2011] 397.880400 total counts/ 349.714000 bgd. counts: snr = 2.575655
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.219473 pixels
  Position = (271.3, 316.2) = 17 42 34.54 -38 59 1.7
  Extent = 7.7" x 3.7", rotation angle = 69
  Source counts = 48.2 +/- 19.9
  Background counts = 349.7
  Rate = 0.0008 +/- 0.0003
[Fri Dec 23 20:21:41 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 20:21:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 20:21:41 2011] Assessing source extent using major
[Fri Dec 23 20:21:41 2011] Source does appear to be extended
[Fri Dec 23 20:21:41 2011] Computing asymmetry using major and minor axis, asym = 2.09
[Fri Dec 23 20:21:41 2011] Source is asymmetric
[Fri Dec 23 22:30:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 23 22:30:46 2011] Initial guess for spatial extent in simple fitting = 5.72"
[Fri Dec 23 22:30:46 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.214
[Fri Dec 23 22:30:46 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 5.72"
[Fri Dec 23 23:38:05 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src23.ximg exists
[Fri Dec 23 23:38:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src23.csv
[Fri Dec 23 23:38:05 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri Dec 23 23:38:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src23.csv
[Fri Dec 23 23:38:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 23:38:05 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri Dec 23 23:38:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri Dec 23 23:38:05 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Dec 23 23:38:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri Dec 23 23:38:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 23:38:34 2011] Spatial fit model total counts = 548.060000, observed total counts = 405.000000
[Fri Dec 23 23:38:34 2011] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Dec 23 23:38:34 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 23:38:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 23:38:34 2011] Assessing source extent using major
[Fri Dec 23 23:38:34 2011] Source does appear to be extended
[Fri Dec 23 23:38:34 2011] Computing asymmetry using major and minor axis, asym = 2.09
[Fri Dec 23 23:38:34 2011] Source is asymmetric
[Sat Dec 24 02:56:34 2011] XMMSAS src. selection expression = ellipse(23553.203400, 27464.458000, 464.604013, 221.995806, 69.211573, X, Y)
[Sat Dec 24 02:56:34 2011] Writing source region out to fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src17_src.reg
[Sat Dec 24 02:56:34 2011] Extracting stamp from image fullrun_mos2_xmm0503500201_pi300-10000_cl_sm2.00.img.gz, (245, 290) - (298, 343)
[Sat Dec 24 02:56:34 2011] XMMSAS bgd. selection expression = annulus(23553.203400, 27464.458000, 774.340022, 1548.680045, X, Y) && !ellipse(24597.942000, 28240.864600, 280.029608, 280.029608, 0.000000, X, Y)
[Sat Dec 24 02:56:34 2011] Writing fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src17.gif
[Sat Dec 24 03:11:23 2011] Mean detx,y = (-1163.45, -3183.00) 
[Sat Dec 24 03:11:26 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 24 03:11:42 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 24 03:11:43 2011] Setting source spectrum file to fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Dec 24 03:11:43 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Dec 24 03:55:20 2011] Not generating rmf since there are only 48 counts
[Sat Dec 24 03:55:20 2011] rmf not generated due to insufficient counts
[Sat Dec 24 04:05:56 2011] Updating aperture counts using extracted products
[Sat Dec 24 04:05:56 2011] Error reading totcts from fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Dec 24 04:05:57 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 04:05:57 2011] Using photon index=1.80, rate=0.000817, arf fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src17.arf
[Sat Dec 24 04:05:57 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 04:05:57 2011] Updating source flux to 1.3e-14
[Sat Dec 24 04:06:57 2011] Flag p found in src. 17 procflags, skipping spectral fitting
[Sat Dec 24 04:06:57 2011] Source 17 has fewer than 100.000000 counts, skipping spectral fitting