[Fri Dec 23 17:08:15 2011] Detection parameters:
  Position = (283.5, 324.9) = 17 42 29.97 -38 58 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.2 +/- 16.1
  Background counts = 65.0
  Rate = 0.002 +/- 0.0003

[Fri Dec 23 17:08:15 2011] Off-axis axis estimate = 2.20'
[Fri Dec 23 19:29:53 2011] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 19:29:53 2011] Initial guess for spatial extent in simple fitting = 7.53"
[Fri Dec 23 19:29:53 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.005
[Fri Dec 23 19:29:53 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 7.53"
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src17.ximg exists
[Fri Dec 23 20:21:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src17.csv
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Dec 23 20:21:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src17.csv
[Fri Dec 23 20:21:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Dec 23 20:21:14 2011] Fit fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Dec 23 20:21:41 2011] Source 16 is offset by -3.084317 and 5.491208 pixels which is larger than
2 X fitted extent = 0.800120 x 0.800120, not incorporating fit results
[Fri Dec 23 20:21:41 2011] Spatial fit model total counts = 432.547000, observed total counts = 431.000000
[Fri Dec 23 20:21:41 2011] Offset between fit and detection position for source 16 = 0.370433 pixels
[Fri Dec 23 20:21:41 2011] 434.295200 total counts/ 385.297000 bgd. counts: snr = 2.496217
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.370433 pixels
  Position = (283.3, 325.2) = 17 42 30.07 -38 58 22.9
  Extent = 3.5 (2.5-5.2)", rotation angle = 0
  Source counts = 49.0 +/- 20.8
  Background counts = 385.3
  Rate = 0.0008 +/- 0.0004
[Fri Dec 23 20:21:41 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 20:21:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 20:21:41 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 20:21:41 2011] Source does appear to be extended
[Fri Dec 23 20:21:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 22:30:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 23 22:30:46 2011] Initial guess for spatial extent in simple fitting = 3.47"
[Fri Dec 23 22:30:46 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.889
[Fri Dec 23 22:30:46 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 3.47"
[Fri Dec 23 23:38:05 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src17.ximg exists
[Fri Dec 23 23:38:05 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Dec 23 23:38:05 2011] Fit fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src17 appears to have run properly
[Fri Dec 23 23:38:05 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Dec 23 23:38:05 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Dec 23 23:38:05 2011] Fit fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Dec 23 23:38:34 2011] Spatial fit model total counts = 430.315000, observed total counts = 431.000000
[Fri Dec 23 23:38:34 2011] Offset between fit and detection position for source 16 = 0.019463 pixels
[Fri Dec 23 23:38:34 2011] 432.129000 total counts/ 382.281000 bgd. counts: snr = 2.549508
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.019463 pixels
  Position = (283.3, 325.2) = 17 42 30.06 -38 58 22.9
  Extent = 3.5 (2.6-4.8)", rotation angle = 0
  Source counts = 49.8 +/- 20.8
  Background counts = 382.3
  Rate = 0.0008 +/- 0.0004
[Fri Dec 23 23:38:34 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 23:38:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 23:38:34 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 23:38:34 2011] Source does appear to be extended
[Fri Dec 23 23:38:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 02:56:34 2011] XMMSAS src. selection expression = ellipse(24597.942000, 28240.864600, 210.022206, 210.022206, 0.000000, X, Y)
[Sat Dec 24 02:56:34 2011] Writing source region out to fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src16_src.reg
[Sat Dec 24 02:56:34 2011] Extracting stamp from image fullrun_mos2_xmm0503500201_pi300-10000_cl_sm2.00.img.gz, (271, 313) - (295, 337)
[Sat Dec 24 02:56:34 2011] XMMSAS bgd. selection expression = annulus(24597.942000, 28240.864600, 350.037010, 700.074020, X, Y) && !ellipse(23553.203400, 27464.458000, 619.472018, 295.994409, 69.211573, X, Y)
[Sat Dec 24 02:56:34 2011] Writing fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src16.gif
[Sat Dec 24 03:07:01 2011] Mean detx,y = (-112.74, -3943.52) 
[Sat Dec 24 03:07:05 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 24 03:07:21 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 24 03:07:21 2011] Setting source spectrum file to fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Dec 24 03:07:21 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sat Dec 24 03:47:21 2011] Not generating rmf since there are only 49 counts
[Sat Dec 24 03:47:21 2011] rmf not generated due to insufficient counts
[Sat Dec 24 04:05:55 2011] Updating aperture counts using extracted products
[Sat Dec 24 04:05:55 2011] Error reading totcts from fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Dec 24 04:05:57 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 04:05:57 2011] Using photon index=1.80, rate=0.000846, arf fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src16.arf
[Sat Dec 24 04:05:57 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 04:05:57 2011] Updating source flux to 1.4e-14
[Sat Dec 24 04:06:57 2011] Flag b found in src. 16 procflags, skipping spectral fitting
[Sat Dec 24 04:06:57 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting