[Fri Dec 23 17:08:14 2011] Detection parameters:
  Position = (250.6, 405.7) = 17 42 42.24 -38 52 31.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.0 +/- 15.3
  Background counts = 59.1
  Rate = 0.002 +/- 0.0004

[Fri Dec 23 17:08:15 2011] Off-axis axis estimate = 8.52'
[Fri Dec 23 19:29:53 2011] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 19:29:53 2011] Initial guess for spatial extent in simple fitting = 10.69"
[Fri Dec 23 19:29:53 2011] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.029
[Fri Dec 23 19:29:53 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 10.69"
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src14.ximg exists
[Fri Dec 23 20:21:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src14.csv
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri Dec 23 20:21:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src14.csv
[Fri Dec 23 20:21:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri Dec 23 20:21:14 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Dec 23 20:21:14 2011] Fit fullrun_mos2_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Dec 23 20:21:41 2011] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.607397 pixels away
[Fri Dec 23 20:21:41 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 20:21:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 20:21:41 2011] Assessing source extent using major
[Fri Dec 23 20:21:41 2011] Source does appear to be extended
[Fri Dec 23 20:21:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 22:30:46 2011] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 22:30:46 2011] Initial guess for spatial extent in simple fitting = 10.69"
[Fri Dec 23 22:30:46 2011] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.029
[Fri Dec 23 22:30:46 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 10.69"
[Fri Dec 23 23:38:05 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src14.ximg exists
[Fri Dec 23 23:38:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src14.csv
[Fri Dec 23 23:38:05 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri Dec 23 23:38:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src14.csv
[Fri Dec 23 23:38:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 23:38:05 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri Dec 23 23:38:05 2011] fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Dec 23 23:38:05 2011] Fit fullrun_mos2_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Fri Dec 23 23:38:34 2011] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 14.468146 pixels away
[Fri Dec 23 23:38:34 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 23:38:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 23:38:34 2011] Assessing source extent using major
[Fri Dec 23 23:38:34 2011] Source does appear to be extended
[Fri Dec 23 23:38:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 02:56:34 2011] XMMSAS src. selection expression = ellipse(21750.063141, 35248.996735, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 24 02:56:34 2011] Writing source region out to fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src10_src.reg
[Sat Dec 24 02:56:34 2011] Extracting stamp from image fullrun_mos2_xmm0503500201_pi300-10000_cl_sm2.00.img.gz, (213, 368) - (288, 443)
[Sat Dec 24 02:56:34 2011] XMMSAS bgd. selection expression = annulus(21750.063141, 35248.996735, 1087.500000, 2175.000000, X, Y) && !ellipse(23201.055237, 32998.179718, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 24 02:56:34 2011] Writing fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src10.gif
[Sat Dec 24 03:04:54 2011] Mean detx,y = (-2886.56, -10955.52) 
[Sat Dec 24 03:04:57 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 24 03:05:18 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 24 03:05:19 2011] Setting source spectrum file to fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Dec 24 03:05:19 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Dec 24 03:47:05 2011] Not generating rmf since there are only 81 counts
[Sat Dec 24 03:47:05 2011] rmf not generated due to insufficient counts
[Sat Dec 24 04:05:55 2011] Updating aperture counts using extracted products
[Sat Dec 24 04:05:55 2011] Error reading totcts from fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Dec 24 04:05:57 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 04:05:57 2011] Using photon index=1.80, rate=0.00217, arf fullrun_mos2_xmm0503500201_pi300-10000_pass1_cl_src10.arf
[Sat Dec 24 04:05:57 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 04:05:57 2011] Updating source flux to 4.4e-14
[Sat Dec 24 04:06:57 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting