[Fri Dec 23 17:07:27 2011] Detection parameters:
  Position = (136.1, 256.0) = 17 43 25.05 -39 3 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.5 +/- 18.5
  Background counts = 66.7
  Rate = 0.004 +/- 0.0006

[Fri Dec 23 17:07:27 2011] Off-axis axis estimate = 12.17'
[Fri Dec 23 18:46:23 2011] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 18:46:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 23 18:46:23 2011] Initial guess for spatial extent in simple fitting = 12.51"
[Fri Dec 23 18:46:23 2011] source mask rpix=2.9, npix_max = 45, mask sum = 36, frac = 0.789
[Fri Dec 23 18:46:23 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 12.51"
[Fri Dec 23 19:29:53 2011] fullrun_mos1_xmm0503500201_pi300-10000_cl_pass0_src4.ximg exists
[Fri Dec 23 19:29:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503500201_pi300-10000_cl_pass0_src4.csv
[Fri Dec 23 19:29:53 2011] fullrun_mos1_xmm0503500201_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Dec 23 19:29:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503500201_pi300-10000_cl_pass0_src4.csv
[Fri Dec 23 19:29:53 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503500201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503500201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 19:29:53 2011] fullrun_mos1_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Dec 23 19:29:53 2011] fullrun_mos1_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Dec 23 19:29:53 2011] Fit fullrun_mos1_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Dec 23 20:21:34 2011] Warning, spatial fit 4 centroid is now closest to src. 15
[Fri Dec 23 20:21:34 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 20:21:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 20:21:34 2011] Assessing source extent using major
[Fri Dec 23 20:21:34 2011] Source does appear to be extended
[Fri Dec 23 20:21:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:47:46 2011] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 21:47:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 23 21:47:46 2011] Initial guess for spatial extent in simple fitting = 12.51"
[Fri Dec 23 21:47:46 2011] source mask rpix=2.9, npix_max = 45, mask sum = 36, frac = 0.789
[Fri Dec 23 21:47:46 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 12.51"
[Fri Dec 23 22:30:45 2011] fullrun_mos1_xmm0503500201_pi300-10000_cl_pass1_src4.ximg exists
[Fri Dec 23 22:30:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503500201_pi300-10000_cl_pass1_src4.csv
[Fri Dec 23 22:30:45 2011] fullrun_mos1_xmm0503500201_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Dec 23 22:30:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503500201_pi300-10000_cl_pass1_src4.csv
[Fri Dec 23 22:30:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503500201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503500201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 22:30:46 2011] fullrun_mos1_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Dec 23 22:30:46 2011] fullrun_mos1_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Dec 23 22:30:46 2011] Fit fullrun_mos1_xmm0503500201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Dec 23 23:38:25 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 12.059057 pixels away
[Fri Dec 23 23:38:25 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 23:38:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 23:38:25 2011] Assessing source extent using major
[Fri Dec 23 23:38:25 2011] Source does appear to be extended
[Fri Dec 23 23:38:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 02:20:32 2011] XMMSAS src. selection expression = ellipse(11788.690582, 22221.966721, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 24 02:20:32 2011] Writing source region out to fullrun_mos1_xmm0503500201_pi300-10000_pass1_cl_src13_src.reg
[Sat Dec 24 02:20:32 2011] Extracting stamp from image fullrun_mos1_xmm0503500201_pi300-10000_cl_sm2.00.img.gz, (99, 218) - (174, 293)
[Sat Dec 24 02:20:32 2011] XMMSAS bgd. selection expression = annulus(11788.690582, 22221.966721, 1087.500000, 2175.000000, X, Y) && !ellipse(13460.186400, 20102.382200, 421.336012, 421.336012, 0.000000, X, Y)
[Sat Dec 24 02:20:32 2011] Writing fullrun_mos1_xmm0503500201_pi300-10000_pass1_cl_src13.gif
[Sat Dec 24 02:22:25 2011] Mean detx,y = (2135.51, 12825.14) 
[Sat Dec 24 02:22:28 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 24 02:22:57 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 24 02:22:57 2011] Setting source spectrum file to fullrun_mos1_xmm0503500201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Dec 24 02:22:57 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0503500201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Dec 24 02:47:37 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 24 02:47:37 2011] rmf not generated due to insufficient counts
[Sat Dec 24 04:05:52 2011] Updating aperture counts using extracted products
[Sat Dec 24 04:05:52 2011] Error reading totcts from fullrun_mos1_xmm0503500201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Dec 24 04:05:53 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 04:05:53 2011] Using photon index=1.80, rate=0.00383, arf fullrun_mos1_xmm0503500201_pi300-10000_pass1_cl_src13.arf
[Sat Dec 24 04:05:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 04:05:53 2011] Updating source flux to 8.5e-14
[Sat Dec 24 04:05:59 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting