[Fri Dec 23 17:07:26 2011] Detection parameters:
  Position = (184.6, 132.5) = 17 43 7.02 -39 12 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.5 +/- 15.2
  Background counts = 52.3
  Rate = 0.001 +/- 0.0002

[Fri Dec 23 17:07:27 2011] Off-axis axis estimate = 14.59'
[Fri Dec 23 18:46:23 2011] Using EEF radius (= 13.72 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 18:46:23 2011] Initial guess for spatial extent in simple fitting = 13.72"
[Fri Dec 23 18:46:23 2011] source mask rpix=3.2, npix_max = 53, mask sum = 42, frac = 0.786
[Fri Dec 23 18:46:23 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 13.72"
[Fri Dec 23 19:29:53 2011] fullrun_mos1_xmm0503500201_pi300-10000_cl_pass0_src19.ximg exists
[Fri Dec 23 19:29:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503500201_pi300-10000_cl_pass0_src19.csv
[Fri Dec 23 19:29:53 2011] fullrun_mos1_xmm0503500201_pi300-10000_cl_pass0_src19_1.ximg exists
[Fri Dec 23 19:29:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503500201_pi300-10000_cl_pass0_src19.csv
[Fri Dec 23 19:29:53 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503500201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503500201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 19:29:53 2011] fullrun_mos1_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Fri Dec 23 19:29:53 2011] fullrun_mos1_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Dec 23 19:29:53 2011] Fit fullrun_mos1_xmm0503500201_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Fri Dec 23 20:21:34 2011] Spatial fit model total counts = 526.139000, observed total counts = 576.000000
[Fri Dec 23 20:21:34 2011] Offset between fit and detection position for source 10 = 5.481718 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 5.481718 pixels
  Position = (189.7, 134.4) = 17 43 5.09 -39 12 12.2
  Extent = 27.4 (27.4-54.9)", rotation angle = 0
  Source counts = 535.8 +/- 23.1
  Background counts = 0.0
  Rate = 0.009 +/- 0.0004
 Deleting source due to low signal-to-noise ratio