[Thu Feb 16 21:31:58 2012] Detection parameters:
  Position = (313.9, 314.9) = 6 22 42.16 -17 57 20.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2507.6 +/- 60.3
  Background counts = 10.9
  Rate = 0.2 +/- 0.004

[Thu Feb 16 21:31:58 2012] Off-axis axis estimate = 1.64'
[Thu Feb 16 21:55:43 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 21:55:43 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Thu Feb 16 21:55:43 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Thu Feb 16 21:55:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Thu Feb 16 22:09:19 2012] fullrun_mos2_xmm0503500101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Feb 16 22:09:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503500101_pi300-10000_cl_pass0_src1.csv
[Thu Feb 16 22:09:19 2012] fullrun_mos2_xmm0503500101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Feb 16 22:09:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503500101_pi300-10000_cl_pass0_src1.csv
[Thu Feb 16 22:09:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503500101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503500101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 22:09:19 2012] fullrun_mos2_xmm0503500101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Feb 16 22:09:19 2012] fullrun_mos2_xmm0503500101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Feb 16 22:09:19 2012] Fit fullrun_mos2_xmm0503500101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Feb 16 22:09:26 2012] Spatial fit model total counts = 2230.000000, observed total counts = 2230.000000
[Thu Feb 16 22:09:26 2012] Offset between fit and detection position for source 2 = 0.177798 pixels
[Thu Feb 16 22:09:26 2012] 2225.365000 total counts/ 500.765000 bgd. counts: snr = 77.067523
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.177798 pixels
  Position = (313.8, 314.9) = 6 22 42.21 -17 57 20.5
  Extent = 5.5 (5.3-5.7)", rotation angle = 0
  Source counts = 1724.6 +/- 47.2
  Background counts = 500.8
  Rate = 0.1 +/- 0.003
[Thu Feb 16 22:09:26 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 22:09:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 22:09:26 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 22:09:26 2012] Source does appear to be extended
[Thu Feb 16 22:09:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 22:31:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 22:31:04 2012] Initial guess for spatial extent in simple fitting = 5.50"
[Thu Feb 16 22:31:04 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.285
[Thu Feb 16 22:31:04 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.50"
[Thu Feb 16 22:43:21 2012] fullrun_mos2_xmm0503500101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Feb 16 22:43:21 2012] fullrun_mos2_xmm0503500101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Feb 16 22:43:21 2012] Fit fullrun_mos2_xmm0503500101_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Feb 16 22:43:21 2012] fullrun_mos2_xmm0503500101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Feb 16 22:43:21 2012] fullrun_mos2_xmm0503500101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Feb 16 22:43:21 2012] Fit fullrun_mos2_xmm0503500101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Feb 16 22:43:27 2012] Spatial fit model total counts = 2234.990000, observed total counts = 2235.000000
[Thu Feb 16 22:43:27 2012] Offset between fit and detection position for source 2 = 0.016903 pixels
[Thu Feb 16 22:43:27 2012] 2248.337000 total counts/ 536.557000 bgd. counts: snr = 73.899247
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.016903 pixels
  Position = (313.7, 314.8) = 6 22 42.22 -17 57 20.5
  Extent = 5.4 (5.2-5.6)", rotation angle = 0
  Source counts = 1711.8 +/- 47.4
  Background counts = 536.6
  Rate = 0.1 +/- 0.003
[Thu Feb 16 22:43:27 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 22:43:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 22:43:27 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 22:43:27 2012] Source does appear to be extended
[Thu Feb 16 22:43:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 23:08:00 2012] Counts = 1711.780000, rescaling region sizes by 2.000000
[Thu Feb 16 23:08:00 2012] XMMSAS src. selection expression = ellipse(27246.598400, 27342.617080, 653.276419, 653.276419, 0.000000, X, Y)
[Thu Feb 16 23:08:00 2012] Writing source region out to fullrun_mos2_xmm0503500101_pi300-10000_pass1_cl_src2_src.reg
[Thu Feb 16 23:08:00 2012] Extracting stamp from image fullrun_mos2_xmm0503500101_pi300-10000_cl_sm2.00.img.gz, (276, 277) - (351, 352)
[Thu Feb 16 23:08:00 2012] XMMSAS bgd. selection expression = annulus(27246.598400, 27342.617080, 2177.588063, 4355.176125, X, Y) && !ellipse(29418.712000, 31432.790360, 980.304028, 980.304028, 0.000000, X, Y) && !ellipse(29930.312000, 22970.551200, 379.259211, 379.259211, 0.000000, X, Y)
[Thu Feb 16 23:08:00 2012] Writing fullrun_mos2_xmm0503500101_pi300-10000_pass1_cl_src2.gif
[Thu Feb 16 23:08:03 2012] Mean detx,y = (166.88, 32.85) 
[Thu Feb 16 23:08:04 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 23:08:17 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 23:08:17 2012] Setting source spectrum file to fullrun_mos2_xmm0503500101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Feb 16 23:08:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503500101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Feb 16 23:15:35 2012] Updating aperture counts using extracted products
[Thu Feb 16 23:15:35 2012] Error reading totcts from fullrun_mos2_xmm0503500101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Feb 16 23:15:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 23:15:35 2012] Using photon index=1.80, rate=0.102, arf fullrun_mos2_xmm0503500101_pi300-10000_pass1_cl_src2.arf
[Thu Feb 16 23:15:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 23:15:35 2012] Updating source flux to 1.3e-12
[Thu Feb 16 23:16:07 2012] Reading fit data from xmm0503500101/analysis//spectral/fullrun_mos2_xmm0503500101_pi300-10000_pass1_cl_src2_pl.csv
[Thu Feb 16 23:16:07 2012] Spectral fit parameter nH value = 5.34753e+21
[Thu Feb 16 23:16:07 2012] Spectral fit parameter PhoIndex value = 7.51301
[Thu Feb 16 23:16:07 2012] Failed to get F(0.3-8.0) from xmm0503500101/analysis//spectral/fullrun_mos2_xmm0503500101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Feb 16 23:16:07 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 23:16:07 2012] Using Nh = 5.3e+21, photon index=7.51, rate=0.102, arf fullrun_mos2_xmm0503500101_pi300-10000_pass1_cl_src2.arf
[Thu Feb 16 23:16:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 23:16:07 2012] Updating source flux to 8.3e-13