[Sun Nov 27 12:09:33 2011] Detection parameters:
  Position = (339.8, 500.0) = 22 43 16.23 -9 22 9.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 217.1 +/- 26.6
  Background counts = 195.8
  Rate = 0.002 +/- 0.0002

[Sun Nov 27 12:09:36 2011] Off-axis axis estimate = 14.92'
[Sun Nov 27 12:25:13 2011] Using EEF radius (= 13.89 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 12:25:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Nov 27 12:25:13 2011] Initial guess for spatial extent in simple fitting = 13.89"
[Sun Nov 27 12:25:13 2011] source mask rpix=3.2, npix_max = 54, mask sum = 64, frac = 1.173
[Sun Nov 27 12:25:13 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 13.89"
[Sun Nov 27 17:14:26 2011] fullrun_pn_xmm0503490201_pi300-10000_cl_pass0_src21.ximg exists
[Sun Nov 27 17:14:26 2011] fullrun_pn_xmm0503490201_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Nov 27 17:14:26 2011] Fit fullrun_pn_xmm0503490201_pi300-10000_cl_pass0_src21 appears to have run properly
[Sun Nov 27 17:14:28 2011] fullrun_pn_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Nov 27 17:14:28 2011] fullrun_pn_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Nov 27 17:14:28 2011] Fit fullrun_pn_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Nov 27 22:33:34 2011] Spatial fit model total counts = 1607.650000, observed total counts = 1673.000000
[Sun Nov 27 22:33:34 2011] Offset between fit and detection position for source 23 = 5.762898 pixels
[Sun Nov 27 22:33:34 2011] 1467.660900 total counts/ 10.420900 bgd. counts: snr = 451.417581
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 5.762898 pixels
  Position = (345.0, 497.4) = 22 43 14.72 -9 22 20.5
  Extent = 27.8 (26.4-55.6)", rotation angle = 0
  Source counts = 1457.2 +/- 38.3
  Background counts = 10.4
  Rate = 0.01 +/- 0.0003
[Sun Nov 27 22:33:35 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:33:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:33:35 2011] Assessing source extent using major axis lower bound
[Sun Nov 27 22:33:35 2011] Source does appear to be extended
[Sun Nov 27 22:33:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:33:35 2011] Source is confused with source 25
[Sun Nov 27 22:34:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Nov 27 22:34:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Nov 27 22:34:37 2011] Initial guess for spatial extent in simple fitting = 27.78"
[Sun Nov 27 22:34:37 2011] source mask rpix=6.4, npix_max = 189, mask sum = 169, frac = 0.891
[Sun Nov 27 22:34:37 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 27.78"
[Mon Nov 28 06:33:44 2011] fullrun_pn_xmm0503490201_pi300-10000_cl_pass1_src21.ximg exists
[Mon Nov 28 06:33:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503490201_pi300-10000_cl_pass1_src21.csv
[Mon Nov 28 06:33:44 2011] fullrun_pn_xmm0503490201_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon Nov 28 06:33:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503490201_pi300-10000_cl_pass1_src21.csv
[Mon Nov 28 06:33:44 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503490201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503490201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 06:33:45 2011] fullrun_pn_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon Nov 28 06:33:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon Nov 28 06:33:45 2011] fullrun_pn_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Nov 28 06:33:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon Nov 28 06:33:45 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 12:43:02 2011] Warning, spatial fit 21 centroid is now closest to src. 28
[Mon Nov 28 12:43:03 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 12:43:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 12:43:03 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 12:43:03 2011] Source does appear to be extended
[Mon Nov 28 12:43:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 12:44:10 2011] Counts = 1457.240000, rescaling region sizes by 2.000000
[Mon Nov 28 12:44:10 2011] XMMSAS src. selection expression = ellipse(29962.524000, 43227.486000, 3333.336096, 3333.336096, 0.000000, X, Y)
[Mon Nov 28 12:44:10 2011] Writing source region out to fullrun_pn_xmm0503490201_pi300-10000_pass1_cl_src23_src.reg
[Mon Nov 28 12:44:10 2011] Extracting stamp from image fullrun_pn_xmm0503490201_pi300-10000_cl_sm2.00.img.gz, (153, 306) - (537, 595)
[Mon Nov 28 12:44:10 2011] XMMSAS bgd. selection expression = annulus(29962.524000, 43227.486000, 11111.120320, 22222.240639, X, Y) && !ellipse(28182.900400, 27052.444000, 6030.360174, 6030.360174, 0.000000, X, Y) && !ellipse(12799.927521, 28753.738373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27346.629200, 27463.388000, 1176.336034, 1176.336034, 0.000000, X, Y) && !ellipse(10208.039467, 29893.876984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24706.726400, 34459.417000, 470.219214, 470.219214, 0.000000, X, Y) && !ellipse(27749.635200, 36622.070200, 450.520013, 450.520013, 0.000000, X, Y) && !ellipse(19825.654099, 35987.076294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16924.704041, 33118.691498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27399.997345, 32633.949524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12739.136642, 32501.721100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43378.638031, 29348.273773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28176.139404, 28274.003784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28978.566254, 27903.842255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42460.924500, 27268.419403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11106.960037, 24141.405548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24226.230287, 43339.714649, 970.271189, 345.239108, 335.772816, X, Y) && !ellipse(23533.733063, 43026.766998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29515.740000, 42549.087800, 498.645614, 498.645614, 0.000000, X, Y) && !ellipse(17664.737220, 41341.271400, 794.716823, 309.388809, 140.784111, X, Y) && !ellipse(36186.994690, 40811.984039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38859.151080, 39379.894400, 703.790420, 309.178409, 42.657123, X, Y) && !ellipse(23223.997345, 37983.015808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15908.218109, 36492.864685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30912.056824, 35869.487701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17966.526917, 35021.073090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21082.162643, 34225.350189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23848.819000, 32996.195600, 570.693616, 391.884811, 136.163910, X, Y) && !ellipse(36485.283740, 32214.856400, 504.126415, 378.309611, 203.419612, X, Y) && !ellipse(29035.901800, 31342.319600, 435.017613, 435.017613, 0.000000, X, Y) && !ellipse(12869.103200, 30104.360600, 332.032810, 332.032810, 0.000000, X, Y) && !ellipse(23718.760480, 29904.554200, 436.662413, 436.662413, 0.000000, X, Y) && !ellipse(22491.330920, 29477.592000, 414.168812, 414.168812, 0.000000, X, Y) && !ellipse(34384.427800, 28017.847400, 354.169610, 354.169610, 0.000000, X, Y) && !ellipse(41600.212600, 27606.603800, 608.072817, 281.079208, 64.107800, X, Y) && !ellipse(15563.545000, 26835.888800, 376.107211, 376.107211, 0.000000, X, Y) && !ellipse(36704.888200, 21474.015400, 513.524015, 374.480811, 293.567919, X, Y) && !ellipse(27193.176140, 21198.075200, 354.747210, 354.747210, 0.000000, X, Y) && !ellipse(27654.048800, 20691.550000, 357.536010, 357.536010, 0.000000, X, Y) && !ellipse(19897.194000, 21150.684000, 1534.328044, 1534.328044, 0.000000, X, Y) && !ellipse(26537.788000, 26911.717600, 1527.792044, 1527.792044, 0.000000, X, Y) && !ellipse(26172.245422, 43771.438995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33503.892000, 42007.699360, 2208.280064, 1179.216034, 16.972000, X, Y) && !ellipse(21472.438675, 37300.914886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24987.425323, 35053.721985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38380.991425, 33691.524689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36315.949463, 33716.768707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19796.886856, 33633.799042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24688.920380, 31709.731171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37335.385132, 30575.340698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29709.615295, 29786.536804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28682.142000, 29694.332000, 891.672026, 891.672026, 0.000000, X, Y) && !ellipse(29418.077148, 29244.422302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29799.282000, 28230.032000, 1384.936040, 1384.936040, 0.000000, X, Y) && !ellipse(35681.741200, 28506.119800, 282.982408, 282.982408, 0.000000, X, Y) && !ellipse(31577.238177, 27375.122504, 1289.624037, 913.133245, 123.126478, X, Y) && !ellipse(31152.716644, 27020.713135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22039.566208, 25358.295746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35851.067108, 23615.879669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29015.863600, 23406.350000, 514.300015, 514.300015, 0.000000, X, Y) && !ellipse(24047.723580, 21461.689800, 479.190414, 479.190414, 0.000000, X, Y) && !ellipse(32413.892731, 21114.818176, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 12:44:10 2011] Writing fullrun_pn_xmm0503490201_pi300-10000_pass1_cl_src23.gif
[Mon Nov 28 14:34:48 2011] Mean detx,y = (-3775.58, -14986.91) 
[Mon Nov 28 14:35:27 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 14:49:09 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 14:49:10 2011] Setting source spectrum file to fullrun_pn_xmm0503490201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon Nov 28 14:49:10 2011] Setting bgd. spectrum file to fullrun_pn_xmm0503490201_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu Dec  1 17:11:38 2011] Updating aperture counts using extracted products
[Thu Dec  1 17:11:38 2011] Error reading totcts from fullrun_pn_xmm0503490201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Dec  1 17:11:41 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 17:11:41 2011] Using photon index=1.80, rate=0.0126, arf fullrun_pn_xmm0503490201_pi300-10000_pass1_cl_src23.arf
[Thu Dec  1 17:11:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 17:11:41 2011] Updating source flux to 8.2e-14
[Thu Dec  1 17:19:14 2011] Flag c found in src. 23 procflags, skipping spectral fitting