[Sun Nov 27 12:11:47 2011] Detection parameters:
  Position = (488.4, 313.0) = 22 42 32.52 -9 35 43.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 269.1 +/- 23.4
  Background counts = 67.0
  Rate = 0.002 +/- 0.0002

[Sun Nov 27 12:11:49 2011] Off-axis axis estimate = 13.81'
[Sun Nov 27 19:40:12 2011] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 19:40:12 2011] Initial guess for spatial extent in simple fitting = 13.33"
[Sun Nov 27 19:40:12 2011] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.101
[Sun Nov 27 19:40:12 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 13.33"
[Sun Nov 27 22:33:05 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_src26.ximg exists
[Sun Nov 27 22:33:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_src26.csv
[Sun Nov 27 22:33:05 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_src26_1.ximg exists
[Sun Nov 27 22:33:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_src26.csv
[Sun Nov 27 22:33:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:33:07 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sun Nov 27 22:33:07 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sun Nov 27 22:33:07 2011] Fit fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Sun Nov 27 22:34:11 2011] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 11.625942 pixels away
[Sun Nov 27 22:34:11 2011] Spatial fit model total counts = 852.490000, observed total counts = 851.000000
[Sun Nov 27 22:34:11 2011] Offset between fit and detection position for source 45 = 2.116567 pixels
[Sun Nov 27 22:34:11 2011] Warning, changing simple spatial fit ID from 26 to 58
[Sun Nov 27 22:34:11 2011] 827.221000 total counts/ 400.884000 bgd. counts: snr = 21.293334
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 2.116567 pixels
  Position = (486.6, 314.1) = 22 42 33.06 -9 35 37.7
  Extent = 26.0 (26.0-52.1)", rotation angle = 0
  Source counts = 426.3 +/- 28.8
  Background counts = 400.9
  Rate = 0.003 +/- 0.0002
[Sun Nov 27 22:34:11 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:34:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:34:11 2011] Assessing source extent using major axis lower bound
[Sun Nov 27 22:34:11 2011] Source does appear to be extended
[Sun Nov 27 22:34:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:34:11 2011] Source is confused with source 43
[Mon Nov 28 09:11:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 09:11:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Nov 28 09:11:03 2011] Initial guess for spatial extent in simple fitting = 26.03"
[Mon Nov 28 09:11:03 2011] source mask rpix=6.0, npix_max = 168, mask sum = 169, frac = 1.005
[Mon Nov 28 09:11:03 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 26.03"
[Mon Nov 28 12:42:29 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_src26.ximg exists
[Mon Nov 28 12:42:29 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_src26_1.ximg exists
[Mon Nov 28 12:42:29 2011] Fit fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_src26 appears to have run properly
[Mon Nov 28 12:42:30 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Mon Nov 28 12:42:30 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Mon Nov 28 12:42:30 2011] Fit fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Mon Nov 28 12:43:36 2011] Warning, spatial fit 26 centroid is now closest to src. 43
[Mon Nov 28 12:43:36 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 12:43:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 12:43:36 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 12:43:36 2011] Source does appear to be extended
[Mon Nov 28 12:43:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 15:00:19 2011] XMMSAS src. selection expression = ellipse(42283.782000, 27278.076000, 1561.950045, 1561.950045, 0.000000, X, Y)
[Thu Dec  1 15:00:19 2011] Writing source region out to fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src45_src.reg
[Thu Dec  1 15:00:19 2011] Extracting stamp from image fullrun_mos2_xmm0503490201_pi300-10000_cl_sm2.00.img.gz, (397, 224) - (576, 404)
[Thu Dec  1 15:00:19 2011] XMMSAS bgd. selection expression = annulus(42283.782000, 27278.076000, 2603.250075, 5206.500150, X, Y) && !ellipse(42475.359894, 22062.607880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37283.747467, 30585.358124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36753.360229, 21465.304611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41086.260000, 27992.612000, 2082.600060, 2082.600060, 0.000000, X, Y)
[Thu Dec  1 15:00:19 2011] Writing fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src45.gif
[Thu Dec  1 15:22:15 2011] Mean detx,y = (-13351.14, 5622.89) 
[Thu Dec  1 15:22:17 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 15:23:10 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 15:23:10 2011] Setting source spectrum file to fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Thu Dec  1 15:23:10 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Thu Dec  1 17:11:46 2011] Updating aperture counts using extracted products
[Thu Dec  1 17:11:46 2011] Error reading totcts from fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Thu Dec  1 17:11:48 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 17:11:48 2011] Using photon index=1.80, rate=0.00337, arf fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src45.arf
[Thu Dec  1 17:11:48 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 17:11:48 2011] Updating source flux to 6.9e-14
[Thu Dec  1 17:15:01 2011] Flag c found in src. 45 procflags, skipping spectral fitting