[Sun Nov 27 12:11:47 2011] Detection parameters:
  Position = (136.7, 328.9) = 22 44 15.96 -9 34 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.0 +/- 16.8
  Background counts = 54.2
  Rate = 0.0007 +/- 0.0001

[Sun Nov 27 12:11:49 2011] Off-axis axis estimate = 11.93'
[Sun Nov 27 19:40:12 2011] Using EEF radius (= 12.40 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 19:40:12 2011] Initial guess for spatial extent in simple fitting = 12.40"
[Sun Nov 27 19:40:12 2011] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.936
[Sun Nov 27 19:40:12 2011] Giving source the simple spatial ID 56 for pass 0, mean size = 12.40"
[Sun Nov 27 22:33:06 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_src56.ximg exists
[Sun Nov 27 22:33:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_src56.csv
[Sun Nov 27 22:33:06 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_src56_1.ximg exists
[Sun Nov 27 22:33:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_src56.csv
[Sun Nov 27 22:33:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:33:07 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Sun Nov 27 22:33:07 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Sun Nov 27 22:33:07 2011] Fit fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src56 appears to have run properly
[Sun Nov 27 22:34:11 2011] Warning, spatial fit 56 centroid is now closest to src. 5
[Sun Nov 27 22:34:11 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:34:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:34:11 2011] Assessing source extent using major
[Sun Nov 27 22:34:11 2011] Source does appear to be extended
[Sun Nov 27 22:34:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:34:11 2011] Source is confused with source 5
[Mon Nov 28 09:11:03 2011] Using EEF radius (= 12.40 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 09:11:03 2011] Initial guess for spatial extent in simple fitting = 12.40"
[Mon Nov 28 09:11:03 2011] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.936
[Mon Nov 28 09:11:03 2011] Giving source the simple spatial ID 52 for pass 1, mean size = 12.40"
[Mon Nov 28 12:42:29 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_src52.ximg exists
[Mon Nov 28 12:42:29 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_src52_1.ximg exists
[Mon Nov 28 12:42:29 2011] Fit fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_src52 appears to have run properly
[Mon Nov 28 12:42:30 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Mon Nov 28 12:42:30 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Mon Nov 28 12:42:30 2011] Fit fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Mon Nov 28 12:43:36 2011] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 13.242846 pixels away
[Mon Nov 28 12:43:36 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 12:43:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 12:43:36 2011] Assessing source extent using major
[Mon Nov 28 12:43:36 2011] Source does appear to be extended
[Mon Nov 28 12:43:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 15:00:19 2011] XMMSAS src. selection expression = ellipse(11842.352707, 28565.449005, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Dec  1 15:00:19 2011] Writing source region out to fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src41_src.reg
[Thu Dec  1 15:00:19 2011] Extracting stamp from image fullrun_mos2_xmm0503490201_pi300-10000_cl_sm2.00.img.gz, (99, 291) - (174, 366)
[Thu Dec  1 15:00:19 2011] XMMSAS bgd. selection expression = annulus(11842.352707, 28565.449005, 1087.500000, 2175.000000, X, Y) && !ellipse(12638.722000, 28741.888000, 1110.744032, 1110.744032, 0.000000, X, Y)
[Thu Dec  1 15:00:19 2011] Writing fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src41.gif
[Thu Dec  1 15:31:17 2011] Mean detx,y = (15175.02, -4471.62) 
[Thu Dec  1 15:31:18 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 15:31:34 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 15:31:35 2011] Setting source spectrum file to fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Thu Dec  1 15:31:35 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Thu Dec  1 16:56:04 2011] Not generating rmf since there are only 92 counts
[Thu Dec  1 16:56:04 2011] rmf not generated due to insufficient counts
[Thu Dec  1 17:11:47 2011] Updating aperture counts using extracted products
[Thu Dec  1 17:11:47 2011] Error reading totcts from fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Thu Dec  1 17:11:49 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 17:11:49 2011] Using photon index=1.80, rate=0.000708, arf fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src41.arf
[Thu Dec  1 17:11:49 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 17:11:49 2011] Updating source flux to 2.2e-14
[Thu Dec  1 17:15:01 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting