[Sun Nov 27 12:11:45 2011] Detection parameters:
  Position = (321.2, 313.1) = 22 43 21.69 -9 35 43.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2723.8 +/- 67.0
  Background counts = 161.9
  Rate = 0.02 +/- 0.0005

[Sun Nov 27 12:11:49 2011] Off-axis axis estimate = 1.96'
[Sun Nov 27 19:40:12 2011] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 19:40:12 2011] Initial guess for spatial extent in simple fitting = 7.41"
[Sun Nov 27 19:40:12 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.824
[Sun Nov 27 19:40:12 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.41"
[Sun Nov 27 22:33:05 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Nov 27 22:33:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_src1.csv
[Sun Nov 27 22:33:05 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Nov 27 22:33:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_src1.csv
[Sun Nov 27 22:33:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:33:06 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Nov 27 22:33:06 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Nov 27 22:33:06 2011] Fit fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Nov 27 22:34:11 2011] Warning, spatial fit 1 centroid is now closest to src. 3
[Sun Nov 27 22:34:11 2011] Source 2 is offset by -2.713149 and -3.131935 pixels which is larger than
2 X fitted extent = 2.781632 x 2.781632, not incorporating fit results
[Sun Nov 27 22:34:11 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:34:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:34:11 2011] Assessing source extent using major
[Sun Nov 27 22:34:11 2011] Source does appear to be extended
[Sun Nov 27 22:34:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:34:11 2011] Source is confused with source 4
[Mon Nov 28 09:11:03 2011] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 09:11:03 2011] Initial guess for spatial extent in simple fitting = 7.41"
[Mon Nov 28 09:11:03 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.824
[Mon Nov 28 09:11:03 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.41"
[Mon Nov 28 12:42:28 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Nov 28 12:42:28 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Nov 28 12:42:28 2011] Fit fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_src1 appears to have run properly
[Mon Nov 28 12:42:29 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Nov 28 12:42:29 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Nov 28 12:42:29 2011] Fit fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Nov 28 12:43:36 2011] Spatial fit model total counts = 10904.200000, observed total counts = 10906.000000
[Mon Nov 28 12:43:36 2011] Offset between fit and detection position for source 2 = 0.133337 pixels
[Mon Nov 28 12:43:36 2011] 10049.900000 total counts/ 8787.750000 bgd. counts: snr = 13.463939
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.133337 pixels
  Position = (321.1, 313.1) = 22 43 21.73 -9 35 42.1
  Extent = 10.3 (9.3-11.7)", rotation angle = 0
  Source counts = 1262.2 +/- 100.2
  Background counts = 8787.8
  Rate = 0.01 +/- 0.0008
[Mon Nov 28 12:43:36 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 12:43:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 12:43:36 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 12:43:36 2011] Source does appear to be extended
[Mon Nov 28 12:43:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 15:00:18 2011] Counts = 1262.150000, rescaling region sizes by 2.000000
[Thu Dec  1 15:00:18 2011] XMMSAS src. selection expression = ellipse(27885.672480, 27194.479600, 1230.084035, 1230.084035, 0.000000, X, Y)
[Thu Dec  1 15:00:18 2011] Writing source region out to fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src2_src.reg
[Thu Dec  1 15:00:18 2011] Extracting stamp from image fullrun_mos2_xmm0503490201_pi300-10000_cl_sm2.00.img.gz, (250, 242) - (392, 384)
[Thu Dec  1 15:00:18 2011] XMMSAS bgd. selection expression = annulus(27885.672480, 27194.479600, 4100.280118, 8200.560236, X, Y) && !ellipse(27369.568000, 27240.976200, 1136.664033, 1136.664033, 0.000000, X, Y) && !ellipse(28682.865021, 27081.717743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27196.117645, 27783.625183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24715.286000, 34471.288400, 443.355213, 381.690411, 354.936304, X, Y) && !ellipse(27415.505371, 25080.279663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20957.027200, 20306.615000, 458.692013, 458.692013, 0.000000, X, Y) && !ellipse(32981.764516, 18826.477123, 519.456616, 382.551155, 321.202538, X, Y) && !ellipse(27482.300598, 32694.003632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20654.225060, 30553.697800, 458.648813, 458.648813, 0.000000, X, Y) && !ellipse(21075.887482, 34253.185516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26657.200000, 28303.854000, 1179.568034, 1179.568034, 0.000000, X, Y) && !ellipse(29015.698640, 31354.577600, 324.318409, 324.318409, 0.000000, X, Y) && !ellipse(23868.688904, 33008.157318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27637.091960, 20678.791600, 304.456009, 304.456009, 0.000000, X, Y) && !ellipse(27189.142385, 21176.729213, 301.836805, 277.136774, 338.997637, X, Y) && !ellipse(20448.578400, 20631.050598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19836.055176, 35975.495056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36753.360229, 21465.304611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22418.498400, 29558.108200, 1312.680038, 1312.680038, 0.000000, X, Y) && !ellipse(31320.457400, 22975.824800, 387.101882, 387.101882, 0.000000, X, Y) && !ellipse(34408.401184, 27954.736511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31340.108612, 34431.438873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28977.940400, 23373.184200, 519.729615, 519.729615, 0.000000, X, Y) && !ellipse(31705.297272, 36201.557526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27776.098000, 35318.824200, 1672.888048, 1672.888048, 0.000000, X, Y)
[Thu Dec  1 15:00:18 2011] Writing fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src2.gif
[Thu Dec  1 15:00:33 2011] Mean detx,y = (-112.55, 274.41) 
[Thu Dec  1 15:00:36 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 15:03:40 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 15:03:41 2011] Setting source spectrum file to fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Dec  1 15:03:41 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Dec  1 17:11:45 2011] Updating aperture counts using extracted products
[Thu Dec  1 17:11:45 2011] Error reading totcts from fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Dec  1 17:11:47 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 17:11:47 2011] Using photon index=1.80, rate=0.00997, arf fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src2.arf
[Thu Dec  1 17:11:47 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 17:11:47 2011] Updating source flux to 8.6e-14
[Thu Dec  1 17:15:01 2011] Flag b found in src. 2 procflags, skipping spectral fitting
[Thu Dec  1 17:15:01 2011] Flag c found in src. 2 procflags, skipping spectral fitting
[Thu Dec  1 17:19:14 2011] Reading fit data from xmm0503490201/analysis//spectral/fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src2_pl.csv
[Thu Dec  1 17:19:14 2011] Spectral fit parameter nH value = 8.32862e+20
[Thu Dec  1 17:19:14 2011] Spectral fit parameter PhoIndex value = 1.80705
[Thu Dec  1 17:19:14 2011] Failed to get F(0.3-8.0) from xmm0503490201/analysis//spectral/fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Dec  1 17:19:14 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 17:19:14 2011] Using Nh = 8.3e+20, photon index=1.81, rate=0.00997, arf fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src2.arf
[Thu Dec  1 17:19:14 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 17:19:14 2011] Updating source flux to 9.4e-14