[Sun Nov 27 12:11:46 2011] Detection parameters:
  Position = (449.0, 452.6) = 22 42 44.13 -9 25 35.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.6 +/- 16.2
  Background counts = 66.5
  Rate = 0.0009 +/- 0.0001

[Sun Nov 27 12:11:49 2011] Off-axis axis estimate = 15.62'
[Sun Nov 27 19:40:12 2011] Using EEF radius (= 14.24 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 19:40:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Nov 27 19:40:12 2011] Initial guess for spatial extent in simple fitting = 14.24"
[Sun Nov 27 19:40:12 2011] source mask rpix=3.3, npix_max = 56, mask sum = 41, frac = 0.720
[Sun Nov 27 19:40:12 2011] Giving source the simple spatial ID 48 for pass 0, mean size = 14.24"
[Sun Nov 27 22:33:06 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_src48.ximg exists
[Sun Nov 27 22:33:06 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_src48_1.ximg exists
[Sun Nov 27 22:33:06 2011] Fit fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_src48 appears to have run properly
[Sun Nov 27 22:33:07 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Sun Nov 27 22:33:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src48.csv
[Sun Nov 27 22:33:07 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Sun Nov 27 22:33:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src48.csv
[Sun Nov 27 22:33:07 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:34:11 2011] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 18.209571 pixels away
[Sun Nov 27 22:34:11 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:34:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:34:11 2011] Assessing source extent using major
[Sun Nov 27 22:34:11 2011] Source does appear to be extended
[Sun Nov 27 22:34:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 09:11:03 2011] Using EEF radius (= 14.24 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 09:11:03 2011] Initial guess for spatial extent in simple fitting = 14.24"
[Mon Nov 28 09:11:03 2011] source mask rpix=3.3, npix_max = 56, mask sum = 41, frac = 0.720
[Mon Nov 28 09:11:03 2011] Giving source the simple spatial ID 46 for pass 1, mean size = 14.24"
[Mon Nov 28 12:42:29 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_src46.ximg exists
[Mon Nov 28 12:42:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_src46.csv
[Mon Nov 28 12:42:29 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_src46_1.ximg exists
[Mon Nov 28 12:42:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_src46.csv
[Mon Nov 28 12:42:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 12:42:30 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Mon Nov 28 12:42:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src46.csv
[Mon Nov 28 12:42:30 2011] fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Mon Nov 28 12:42:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src46.csv
[Mon Nov 28 12:42:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 12:43:36 2011] Spatial fit model total counts = 559.428000, observed total counts = 651.000000
[Mon Nov 28 12:43:36 2011] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Nov 28 12:43:36 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 12:43:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 12:43:36 2011] Assessing source extent using major
[Mon Nov 28 12:43:36 2011] Source does appear to be extended
[Mon Nov 28 12:43:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 15:00:19 2011] XMMSAS src. selection expression = ellipse(39014.457520, 39324.363159, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Dec  1 15:00:19 2011] Writing source region out to fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src13_src.reg
[Thu Dec  1 15:00:19 2011] Extracting stamp from image fullrun_mos2_xmm0503490201_pi300-10000_cl_sm2.00.img.gz, (411, 415) - (486, 490)
[Thu Dec  1 15:00:19 2011] XMMSAS bgd. selection expression = annulus(39014.457520, 39324.363159, 1087.500000, 2175.000000, X, Y)
[Thu Dec  1 15:00:19 2011] Writing fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src13.gif
[Thu Dec  1 15:29:35 2011] Mean detx,y = (-5746.01, 15595.28) 
[Thu Dec  1 15:29:36 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 15:29:56 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 15:29:57 2011] Setting source spectrum file to fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Dec  1 15:29:57 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Dec  1 16:55:31 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Dec  1 16:55:31 2011] rmf not generated due to insufficient counts
[Thu Dec  1 17:11:47 2011] Updating aperture counts using extracted products
[Thu Dec  1 17:11:47 2011] Error reading totcts from fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Dec  1 17:11:49 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 17:11:49 2011] Using photon index=1.80, rate=0.000897, arf fullrun_mos2_xmm0503490201_pi300-10000_pass1_cl_src13.arf
[Thu Dec  1 17:11:49 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 17:11:49 2011] Updating source flux to 4.8e-14
[Thu Dec  1 17:15:01 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting