[Sun Nov 27 12:10:34 2011] Detection parameters:
  Position = (346.8, 330.8) = 22 43 14.18 -9 34 23.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.2 +/- 21.4
  Background counts = 144.7
  Rate = 0.0008 +/- 0.0002

[Sun Nov 27 12:10:34 2011] Off-axis axis estimate = 4.22'
[Sun Nov 27 17:14:29 2011] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 17:14:29 2011] Initial guess for spatial extent in simple fitting = 8.54"
[Sun Nov 27 17:14:29 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.031
[Sun Nov 27 17:14:29 2011] Giving source the simple spatial ID 41 for pass 0, mean size = 8.54"
[Sun Nov 27 19:40:10 2011] fullrun_mos1_xmm0503490201_pi300-10000_cl_pass0_src41.ximg exists
[Sun Nov 27 19:40:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503490201_pi300-10000_cl_pass0_src41.csv
[Sun Nov 27 19:40:10 2011] fullrun_mos1_xmm0503490201_pi300-10000_cl_pass0_src41_1.ximg exists
[Sun Nov 27 19:40:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503490201_pi300-10000_cl_pass0_src41.csv
[Sun Nov 27 19:40:10 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503490201_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503490201_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 19:40:11 2011] fullrun_mos1_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sun Nov 27 19:40:11 2011] fullrun_mos1_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sun Nov 27 19:40:11 2011] Fit fullrun_mos1_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Sun Nov 27 22:33:51 2011] Warning, spatial fit 41 centroid is now closest to src. 15
[Sun Nov 27 22:33:51 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:33:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:33:51 2011] Assessing source extent using major
[Sun Nov 27 22:33:51 2011] Source does appear to be extended
[Sun Nov 27 22:33:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 06:33:46 2011] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 06:33:46 2011] Initial guess for spatial extent in simple fitting = 8.54"
[Mon Nov 28 06:33:46 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.031
[Mon Nov 28 06:33:46 2011] Giving source the simple spatial ID 35 for pass 1, mean size = 8.54"
[Mon Nov 28 09:11:02 2011] fullrun_mos1_xmm0503490201_pi300-10000_cl_pass1_src35.ximg exists
[Mon Nov 28 09:11:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503490201_pi300-10000_cl_pass1_src35.csv
[Mon Nov 28 09:11:02 2011] fullrun_mos1_xmm0503490201_pi300-10000_cl_pass1_src35_1.ximg exists
[Mon Nov 28 09:11:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503490201_pi300-10000_cl_pass1_src35.csv
[Mon Nov 28 09:11:02 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503490201_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503490201_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 09:11:03 2011] fullrun_mos1_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Mon Nov 28 09:11:03 2011] fullrun_mos1_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Mon Nov 28 09:11:03 2011] Fit fullrun_mos1_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Mon Nov 28 12:43:19 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 35.983286 pixels away
[Mon Nov 28 12:43:19 2011] Spatial fit model total counts = 5765.790000, observed total counts = 5754.000000
[Mon Nov 28 12:43:19 2011] Offset between fit and detection position for source 40 = 4.733488 pixels
[Mon Nov 28 12:43:19 2011] Warning, changing simple spatial fit ID from 35 to 12
[Mon Nov 28 12:43:19 2011] 5163.950000 total counts/ 3770.630000 bgd. counts: snr = 22.690492
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 4.733488 pixels
  Position = (345.1, 335.2) = 22 43 14.66 -9 34 6.1
  Extent = 26.3 (26.3-52.6)", rotation angle = 0
  Source counts = 1393.3 +/- 71.9
  Background counts = 3770.6
  Rate = 0.01 +/- 0.0006
[Mon Nov 28 12:43:19 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 12:43:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 12:43:19 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 12:43:19 2011] Source does appear to be extended
[Mon Nov 28 12:43:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 12:43:19 2011] Source is confused with source 15
[Thu Dec  1 09:58:34 2011] Counts = 1393.320000, rescaling region sizes by 2.000000
[Thu Dec  1 09:58:34 2011] XMMSAS src. selection expression = ellipse(29978.290000, 29114.956000, 3158.736091, 3158.736091, 0.000000, X, Y)
[Thu Dec  1 09:58:34 2011] Writing source region out to fullrun_mos1_xmm0503490201_pi300-10000_pass1_cl_src40_src.reg
[Thu Dec  1 09:58:34 2011] Extracting stamp from image fullrun_mos1_xmm0503490201_pi300-10000_cl_sm2.00.img.gz, (164, 154) - (527, 517)
[Thu Dec  1 09:58:34 2011] XMMSAS bgd. selection expression = annulus(29978.290000, 29114.956000, 10529.120303, 21058.240606, X, Y) && !ellipse(27938.179600, 27162.151200, 1194.296034, 1194.296034, 0.000000, X, Y) && !ellipse(27191.630000, 27106.228800, 2388.592069, 2388.592069, 0.000000, X, Y) && !ellipse(28293.830000, 27224.009200, 1226.192035, 1226.192035, 0.000000, X, Y) && !ellipse(24719.030600, 34466.881400, 435.108013, 435.108013, 0.000000, X, Y) && !ellipse(27162.661600, 27855.720400, 260.544807, 260.544807, 0.000000, X, Y) && !ellipse(12795.116608, 28742.247406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27777.513800, 36618.647600, 476.418414, 476.418414, 0.000000, X, Y) && !ellipse(32977.751923, 18803.867401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27476.041200, 32688.075600, 349.953610, 349.953610, 0.000000, X, Y) && !ellipse(20675.794780, 30547.067800, 436.656813, 436.656813, 0.000000, X, Y) && !ellipse(28724.796000, 27838.174000, 1124.216032, 1124.216032, 0.000000, X, Y) && !ellipse(29372.550000, 28285.828000, 1008.640029, 1008.640029, 0.000000, X, Y) && !ellipse(21079.421326, 34240.356415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12724.970734, 32485.156372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19827.941382, 35999.364853, 571.991193, 290.818521, 318.144526, X, Y) && !ellipse(23855.089800, 33012.586800, 318.084952, 318.084952, 0.000000, X, Y) && !ellipse(29021.767820, 31354.424600, 398.546411, 398.546411, 0.000000, X, Y) && !ellipse(27182.788500, 21168.858040, 357.924810, 357.924810, 0.000000, X, Y) && !ellipse(42466.741669, 22070.542435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38353.251678, 18725.492264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36691.078552, 21453.724701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16954.533295, 33109.876801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17015.251160, 19539.848160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34349.030800, 27962.753800, 526.894015, 526.894015, 0.000000, X, Y) && !ellipse(24112.995800, 21465.166800, 1092.760031, 1092.760031, 0.000000, X, Y) && !ellipse(22366.792200, 29627.076000, 1152.104033, 1152.104033, 0.000000, X, Y) && !ellipse(38848.212860, 39372.435120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11099.783493, 24210.831909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29531.667267, 42534.136932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37831.912781, 15723.977661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34321.138336, 14701.203293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15884.470200, 36421.770966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15548.189499, 26848.927429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12840.848160, 30110.742432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41639.917755, 27652.164062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18004.262848, 35037.244873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34398.700800, 42016.920400, 1198.624034, 1198.624034, 0.000000, X, Y)
[Thu Dec  1 09:58:34 2011] Writing fullrun_mos1_xmm0503490201_pi300-10000_pass1_cl_src40.gif
[Thu Dec  1 10:29:32 2011] Mean detx,y = (1768.68, 754.68) 
[Thu Dec  1 10:29:35 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 10:40:00 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 10:40:00 2011] Setting source spectrum file to fullrun_mos1_xmm0503490201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Thu Dec  1 10:40:00 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0503490201_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Thu Dec  1 17:11:43 2011] Updating aperture counts using extracted products
[Thu Dec  1 17:11:43 2011] Error reading totcts from fullrun_mos1_xmm0503490201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Thu Dec  1 17:11:44 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 17:11:44 2011] Using photon index=1.80, rate=0.0111, arf fullrun_mos1_xmm0503490201_pi300-10000_pass1_cl_src40.arf
[Thu Dec  1 17:11:44 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 17:11:44 2011] Updating source flux to 9.6e-14
[Thu Dec  1 17:11:51 2011] Flag c found in src. 40 procflags, skipping spectral fitting