[Sun Nov 27 12:10:32 2011] Detection parameters:
  Position = (328.8, 314.0) = 22 43 19.47 -9 35 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2106.1 +/- 64.6
  Background counts = 161.1
  Rate = 0.02 +/- 0.0005

[Sun Nov 27 12:10:34 2011] Off-axis axis estimate = 2.47'
[Sun Nov 27 17:14:29 2011] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 17:14:29 2011] Initial guess for spatial extent in simple fitting = 7.66"
[Sun Nov 27 17:14:29 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.977
[Sun Nov 27 17:14:29 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.66"
[Sun Nov 27 19:40:10 2011] fullrun_mos1_xmm0503490201_pi300-10000_cl_pass0_src3.ximg exists
[Sun Nov 27 19:40:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503490201_pi300-10000_cl_pass0_src3.csv
[Sun Nov 27 19:40:10 2011] fullrun_mos1_xmm0503490201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Nov 27 19:40:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503490201_pi300-10000_cl_pass0_src3.csv
[Sun Nov 27 19:40:10 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503490201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503490201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 19:40:10 2011] fullrun_mos1_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Nov 27 19:40:11 2011] fullrun_mos1_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Nov 27 19:40:11 2011] Fit fullrun_mos1_xmm0503490201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Nov 27 22:33:51 2011] Spatial fit model total counts = 11392.800000, observed total counts = 11376.000000
[Sun Nov 27 22:33:51 2011] Offset between fit and detection position for source 1 = 3.022586 pixels
[Sun Nov 27 22:33:51 2011] 11386.150000 total counts/ 9083.090000 bgd. counts: snr = 24.165091
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.022586 pixels
  Position = (325.8, 313.5) = 22 43 20.35 -9 35 40.7
  Extent = 15.3 (15.3-30.7)", rotation angle = 0
  Source counts = 2303.1 +/- 106.7
  Background counts = 9083.1
  Rate = 0.02 +/- 0.0008
[Sun Nov 27 22:33:51 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:33:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:33:51 2011] Assessing source extent using major axis lower bound
[Sun Nov 27 22:33:51 2011] Source does appear to be extended
[Sun Nov 27 22:33:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:33:51 2011] Source is confused with source 3
[Mon Nov 28 06:33:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 06:33:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Nov 28 06:33:46 2011] Initial guess for spatial extent in simple fitting = 15.33"
[Mon Nov 28 06:33:46 2011] source mask rpix=3.5, npix_max = 64, mask sum = 72, frac = 1.112
[Mon Nov 28 06:33:46 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 15.33"
[Mon Nov 28 09:11:02 2011] fullrun_mos1_xmm0503490201_pi300-10000_cl_pass1_src3.ximg exists
[Mon Nov 28 09:11:02 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503490201_pi300-10000_cl_pass1_src3.csv
[Mon Nov 28 09:11:02 2011] fullrun_mos1_xmm0503490201_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Nov 28 09:11:02 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503490201_pi300-10000_cl_pass1_src3.csv
[Mon Nov 28 09:11:02 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503490201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503490201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 09:11:02 2011] fullrun_mos1_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Nov 28 09:11:02 2011] fullrun_mos1_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Nov 28 09:11:02 2011] Fit fullrun_mos1_xmm0503490201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Nov 28 12:43:19 2011] Warning, spatial fit 3 centroid is now closest to src. 15
[Mon Nov 28 12:43:19 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 12:43:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 12:43:19 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 12:43:19 2011] Source does appear to be extended
[Mon Nov 28 12:43:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 09:58:33 2011] Counts = 2303.060000, rescaling region sizes by 2.000000
[Thu Dec  1 09:58:33 2011] XMMSAS src. selection expression = ellipse(28293.830000, 27224.009200, 1839.288053, 1839.288053, 0.000000, X, Y)
[Thu Dec  1 09:58:33 2011] Writing source region out to fullrun_mos1_xmm0503490201_pi300-10000_pass1_cl_src1_src.reg
[Thu Dec  1 09:58:33 2011] Extracting stamp from image fullrun_mos1_xmm0503490201_pi300-10000_cl_sm2.00.img.gz, (220, 208) - (431, 419)
[Thu Dec  1 09:58:33 2011] XMMSAS bgd. selection expression = annulus(28293.830000, 27224.009200, 6130.960176, 12261.920353, X, Y) && !ellipse(27938.179600, 27162.151200, 1194.296034, 1194.296034, 0.000000, X, Y) && !ellipse(27191.630000, 27106.228800, 2388.592069, 2388.592069, 0.000000, X, Y) && !ellipse(24719.030600, 34466.881400, 435.108013, 435.108013, 0.000000, X, Y) && !ellipse(27162.661600, 27855.720400, 260.544807, 260.544807, 0.000000, X, Y) && !ellipse(27777.513800, 36618.647600, 476.418414, 476.418414, 0.000000, X, Y) && !ellipse(32977.751923, 18803.867401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27476.041200, 32688.075600, 349.953610, 349.953610, 0.000000, X, Y) && !ellipse(20675.794780, 30547.067800, 436.656813, 436.656813, 0.000000, X, Y) && !ellipse(28724.796000, 27838.174000, 1124.216032, 1124.216032, 0.000000, X, Y) && !ellipse(29372.550000, 28285.828000, 1008.640029, 1008.640029, 0.000000, X, Y) && !ellipse(21079.421326, 34240.356415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19827.941382, 35999.364853, 571.991193, 290.818521, 318.144526, X, Y) && !ellipse(23855.089800, 33012.586800, 318.084952, 318.084952, 0.000000, X, Y) && !ellipse(29021.767820, 31354.424600, 398.546411, 398.546411, 0.000000, X, Y) && !ellipse(27182.788500, 21168.858040, 357.924810, 357.924810, 0.000000, X, Y) && !ellipse(38353.251678, 18725.492264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36691.078552, 21453.724701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16954.533295, 33109.876801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17015.251160, 19539.848160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34349.030800, 27962.753800, 526.894015, 526.894015, 0.000000, X, Y) && !ellipse(24112.995800, 21465.166800, 1092.760031, 1092.760031, 0.000000, X, Y) && !ellipse(22366.792200, 29627.076000, 1152.104033, 1152.104033, 0.000000, X, Y) && !ellipse(38848.212860, 39372.435120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37831.912781, 15723.977661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34321.138336, 14701.203293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15884.470200, 36421.770966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15548.189499, 26848.927429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29978.290000, 29114.956000, 2105.824061, 2105.824061, 0.000000, X, Y) && !ellipse(18004.262848, 35037.244873, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec  1 09:58:33 2011] Writing fullrun_mos1_xmm0503490201_pi300-10000_pass1_cl_src1.gif
[Thu Dec  1 10:14:21 2011] Mean detx,y = (604.60, 225.53) 
[Thu Dec  1 10:14:25 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 10:18:29 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 10:18:30 2011] Setting source spectrum file to fullrun_mos1_xmm0503490201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Dec  1 10:18:30 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0503490201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Dec  1 17:11:42 2011] Updating aperture counts using extracted products
[Thu Dec  1 17:11:42 2011] Error reading totcts from fullrun_mos1_xmm0503490201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Dec  1 17:11:44 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 17:11:44 2011] Using photon index=1.80, rate=0.0183, arf fullrun_mos1_xmm0503490201_pi300-10000_pass1_cl_src1.arf
[Thu Dec  1 17:11:44 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 17:11:44 2011] Updating source flux to 1.5e-13
[Thu Dec  1 17:11:51 2011] Flag c found in src. 1 procflags, skipping spectral fitting