[Fri Aug 31 22:34:33 2012] Detection parameters:
  Position = (354.2, 160.9) = 15 56 49.45 22 16 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.5 +/- 17.6
  Background counts = 8.6
  Rate = 0.03 +/- 0.003

[Fri Aug 31 22:34:34 2012] Off-axis axis estimate = 10.76'
[Fri Aug 31 22:40:47 2012] Using EEF radius (= 11.81 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 22:40:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 31 22:40:47 2012] Initial guess for spatial extent in simple fitting = 11.81"
[Fri Aug 31 22:40:47 2012] source mask rpix=2.7, npix_max = 41, mask sum = 35, frac = 0.847
[Fri Aug 31 22:40:47 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.81"
[Fri Aug 31 22:43:58 2012] fullrun_mos2_xmm0503481001_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug 31 22:43:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503481001_pi300-10000_cl_pass0_src1.csv
[Fri Aug 31 22:43:58 2012] fullrun_mos2_xmm0503481001_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug 31 22:43:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503481001_pi300-10000_cl_pass0_src1.csv
[Fri Aug 31 22:43:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503481001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503481001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 22:43:58 2012] fullrun_mos2_xmm0503481001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 31 22:43:58 2012] fullrun_mos2_xmm0503481001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 31 22:43:58 2012] Fit fullrun_mos2_xmm0503481001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug 31 22:44:00 2012] Spatial fit model total counts = 246.600000, observed total counts = 244.000000
[Fri Aug 31 22:44:00 2012] Offset between fit and detection position for source 3 = 0.029357 pixels
[Fri Aug 31 22:44:00 2012] 247.420000 total counts/ 132.520000 bgd. counts: snr = 9.981121
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.029357 pixels
  Position = (354.2, 160.9) = 15 56 49.44 22 16 1.1
  Extent = 5.7 (4.8-6.7)", rotation angle = 0
  Source counts = 114.9 +/- 15.7
  Background counts = 132.5
  Rate = 0.02 +/- 0.003
[Fri Aug 31 22:44:00 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 22:44:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 22:44:00 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 22:44:00 2012] Source does appear to be extended
[Fri Aug 31 22:44:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 22:49:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 22:49:40 2012] Initial guess for spatial extent in simple fitting = 5.72"
[Fri Aug 31 22:49:40 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.214
[Fri Aug 31 22:49:40 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.72"
[Fri Aug 31 22:53:27 2012] fullrun_mos2_xmm0503481001_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 31 22:53:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503481001_pi300-10000_cl_pass1_src1.csv
[Fri Aug 31 22:53:27 2012] fullrun_mos2_xmm0503481001_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 31 22:53:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503481001_pi300-10000_cl_pass1_src1.csv
[Fri Aug 31 22:53:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503481001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503481001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 22:53:27 2012] fullrun_mos2_xmm0503481001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 31 22:53:27 2012] fullrun_mos2_xmm0503481001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 31 22:53:27 2012] Fit fullrun_mos2_xmm0503481001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug 31 22:53:29 2012] Spatial fit model total counts = 197.274000, observed total counts = 195.000000
[Fri Aug 31 22:53:29 2012] Offset between fit and detection position for source 3 = 0.016676 pixels
[Fri Aug 31 22:53:29 2012] 196.915600 total counts/ 85.825600 bgd. counts: snr = 11.991308
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.016676 pixels
  Position = (354.2, 160.9) = 15 56 49.44 22 16 1.0
  Extent = 5.5 (4.6-6.5)", rotation angle = 0
  Source counts = 111.1 +/- 14.0
  Background counts = 85.8
  Rate = 0.02 +/- 0.002
[Fri Aug 31 22:53:29 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 22:53:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 22:53:29 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 22:53:29 2012] Source does appear to be extended
[Fri Aug 31 22:53:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 22:55:22 2012] XMMSAS src. selection expression = ellipse(30765.307740, 13947.149200, 331.547410, 331.547410, 0.000000, X, Y)
[Fri Aug 31 22:55:22 2012] Writing source region out to fullrun_mos2_xmm0503481001_pi300-10000_pass1_cl_src3_src.reg
[Fri Aug 31 22:55:22 2012] Extracting stamp from image fullrun_mos2_xmm0503481001_pi300-10000_cl_sm2.00.img.gz, (335, 142) - (373, 180)
[Fri Aug 31 22:55:22 2012] XMMSAS bgd. selection expression = annulus(30765.307740, 13947.149200, 552.579016, 1105.158032, X, Y)
[Fri Aug 31 22:55:22 2012] Writing fullrun_mos2_xmm0503481001_pi300-10000_pass1_cl_src3.gif
[Fri Aug 31 22:55:23 2012] Mean detx,y = (386.84, 11256.89) 
[Fri Aug 31 22:55:24 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 22:55:32 2012] grppha failed
[Fri Aug 31 22:55:32 2012] Setting source spectrum file to fullrun_mos2_xmm0503481001_pi300-10000_pass1_cl_src3_src.pi.gz
[Fri Aug 31 22:55:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503481001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Aug 31 22:56:13 2012] Updating aperture counts using extracted products
[Fri Aug 31 22:56:13 2012] Error reading totcts from fullrun_mos2_xmm0503481001_pi300-10000_pass1_cl_src3_src.pi.gz
[Fri Aug 31 22:56:13 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 22:56:15 2012] Source 3 has no response, skipping
[Fri Aug 31 22:56:16 2012] xmm0503481001/analysis//spectral/fullrun_mos2_xmm0503481001_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete