[Fri May 25 10:19:46 2012] Detection parameters:
  Position = (318.4, 310.0) = 22 3 27.00 -34 56 31.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.8 +/- 16.9
  Background counts = 62.2
  Rate = 0.02 +/- 0.002

[Fri May 25 10:19:46 2012] Off-axis axis estimate = 1.67'
[Fri May 25 10:33:17 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Fri May 25 10:33:17 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Fri May 25 10:33:17 2012] source mask rpix=1.7, npix_max = 18, mask sum = 18, frac = 0.956
[Fri May 25 10:33:17 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.26"
[Fri May 25 10:38:23 2012] fullrun_mos2_xmm0503480601_pi300-10000_cl_pass0_src2.ximg exists
[Fri May 25 10:38:23 2012] fullrun_mos2_xmm0503480601_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri May 25 10:38:23 2012] Fit fullrun_mos2_xmm0503480601_pi300-10000_cl_pass0_src2 appears to have run properly
[Fri May 25 10:38:23 2012] fullrun_mos2_xmm0503480601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri May 25 10:38:23 2012] fullrun_mos2_xmm0503480601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri May 25 10:38:23 2012] Fit fullrun_mos2_xmm0503480601_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri May 25 10:38:28 2012] Spatial fit model total counts = 400.906000, observed total counts = 380.000000
[Fri May 25 10:38:28 2012] Offset between fit and detection position for source 2 = 0.935194 pixels
[Fri May 25 10:38:28 2012] 407.685100 total counts/ 341.015000 bgd. counts: snr = 3.610309
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.935194 pixels
  Position = (319.3, 309.8) = 22 3 26.68 -34 56 32.3
  Extent = 8.2 (2.8-13.9)", rotation angle = 0
  Source counts = 66.7 +/- 20.2
  Background counts = 341.0
  Rate = 0.01 +/- 0.004
[Fri May 25 10:38:28 2012] Vigneting correction estimate = 1.000000
[Fri May 25 10:38:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 10:38:28 2012] Assessing source extent using major axis lower bound
[Fri May 25 10:38:28 2012] Source does appear to be extended
[Fri May 25 10:38:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 10:47:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 25 10:47:38 2012] Initial guess for spatial extent in simple fitting = 8.23"
[Fri May 25 10:47:38 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.092
[Fri May 25 10:47:38 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 8.23"
[Fri May 25 10:53:19 2012] fullrun_mos2_xmm0503480601_pi300-10000_cl_pass1_src2.ximg exists
[Fri May 25 10:53:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503480601_pi300-10000_cl_pass1_src2.csv
[Fri May 25 10:53:19 2012] fullrun_mos2_xmm0503480601_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri May 25 10:53:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503480601_pi300-10000_cl_pass1_src2.csv
[Fri May 25 10:53:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503480601_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503480601_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 10:53:19 2012] fullrun_mos2_xmm0503480601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri May 25 10:53:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503480601_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri May 25 10:53:19 2012] fullrun_mos2_xmm0503480601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri May 25 10:53:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503480601_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri May 25 10:53:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503480601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503480601_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 10:53:24 2012] Spatial fit model total counts = 441.622000, observed total counts = 397.000000
[Fri May 25 10:53:24 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 25 10:53:24 2012] Vigneting correction estimate = 1.000000
[Fri May 25 10:53:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 10:53:24 2012] Assessing source extent using major axis lower bound
[Fri May 25 10:53:24 2012] Source does appear to be extended
[Fri May 25 10:53:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 10:56:39 2012] XMMSAS src. selection expression = ellipse(27727.480400, 26900.382600, 493.925889, 493.925889, 0.000000, X, Y)
[Fri May 25 10:56:39 2012] Writing source region out to fullrun_mos2_xmm0503480601_pi300-10000_pass1_cl_src2_src.reg
[Fri May 25 10:56:39 2012] Extracting stamp from image fullrun_mos2_xmm0503480601_pi300-10000_cl_sm2.00.img.gz, (291, 281) - (348, 338)
[Fri May 25 10:56:39 2012] XMMSAS bgd. selection expression = annulus(27727.480400, 26900.382600, 823.209815, 1646.419630, X, Y)
[Fri May 25 10:56:39 2012] Writing fullrun_mos2_xmm0503480601_pi300-10000_pass1_cl_src2.gif
[Fri May 25 10:57:26 2012] Mean detx,y = (-36.84, 21.17) 
[Fri May 25 10:57:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 10:57:38 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 10:57:38 2012] Setting source spectrum file to fullrun_mos2_xmm0503480601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May 25 10:57:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503480601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri May 25 10:58:13 2012] Not generating rmf since there are only 66 counts
[Fri May 25 10:58:13 2012] rmf not generated due to insufficient counts
[Fri May 25 10:58:41 2012] Updating aperture counts using extracted products
[Fri May 25 10:58:41 2012] Error reading totcts from fullrun_mos2_xmm0503480601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May 25 10:58:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 10:58:41 2012] Using photon index=1.80, rate=0.0146, arf fullrun_mos2_xmm0503480601_pi300-10000_pass1_cl_src2.arf
[Fri May 25 10:58:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 10:58:41 2012] Updating source flux to 1.7e-13
[Fri May 25 10:58:43 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Fri May 25 10:58:43 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 25 10:58:44 2012] xmm0503480601/analysis//spectral/fullrun_mos2_xmm0503480601_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete