[Sat Jun 16 02:46:16 2012] Detection parameters:
  Position = (270.7, 246.1) = 2 36 20.98 11 35 36.8
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 103.5 +/- 32.4
  Background counts = 108.7
  Rate = 0.009 +/- 0.003

[Sat Jun 16 02:46:17 2012] Off-axis axis estimate = 4.30'
[Sat Jun 16 02:56:38 2012] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 02:56:38 2012] Initial guess for spatial extent in simple fitting = 8.58"
[Sat Jun 16 02:56:38 2012] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.737
[Sat Jun 16 02:56:38 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.58"
[Sat Jun 16 03:01:45 2012] fullrun_mos1_xmm0503480401_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 16 03:01:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503480401_pi300-10000_cl_pass0_src1.csv
[Sat Jun 16 03:01:45 2012] fullrun_mos1_xmm0503480401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 16 03:01:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503480401_pi300-10000_cl_pass0_src1.csv
[Sat Jun 16 03:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503480401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503480401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 03:01:45 2012] fullrun_mos1_xmm0503480401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 16 03:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503480401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 16 03:01:45 2012] fullrun_mos1_xmm0503480401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 16 03:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503480401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 16 03:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503480401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503480401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 03:06:59 2012] Source 1 is offset by -6.735749 and 6.469255 pixels which is larger than
2 X fitted extent = 0.925513 x 0.925513, not incorporating fit results
[Sat Jun 16 03:06:59 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 03:06:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 03:06:59 2012] Assessing source extent using major
[Sat Jun 16 03:06:59 2012] Source does appear to be extended
[Sat Jun 16 03:06:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 03:16:48 2012] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 03:16:48 2012] Initial guess for spatial extent in simple fitting = 8.58"
[Sat Jun 16 03:16:48 2012] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.737
[Sat Jun 16 03:16:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.58"
[Sat Jun 16 03:21:58 2012] fullrun_mos1_xmm0503480401_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 16 03:21:58 2012] fullrun_mos1_xmm0503480401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 16 03:21:58 2012] Fit fullrun_mos1_xmm0503480401_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Jun 16 03:21:58 2012] fullrun_mos1_xmm0503480401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 16 03:21:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503480401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 16 03:21:58 2012] fullrun_mos1_xmm0503480401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 16 03:21:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503480401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 16 03:21:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503480401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503480401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 03:27:13 2012] Source 1 is offset by 4.249837 and -4.516331 pixels which is larger than
2 X fitted extent = 0.447685 x 0.447685, not incorporating fit results
[Sat Jun 16 03:27:13 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 03:27:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 03:27:13 2012] Assessing source extent using major
[Sat Jun 16 03:27:13 2012] Source does appear to be extended
[Sat Jun 16 03:27:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 03:32:51 2012] XMMSAS src. selection expression = ellipse(23499.647797, 21359.167160, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jun 16 03:32:51 2012] Writing source region out to fullrun_mos1_xmm0503480401_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 16 03:32:51 2012] Extracting stamp from image fullrun_mos1_xmm0503480401_pi300-10000_cl_sm2.00.img.gz, (196, 171) - (346, 321)
[Sat Jun 16 03:32:51 2012] XMMSAS bgd. selection expression = annulus(23499.647797, 21359.167160, 2175.000000, 4350.000000, X, Y) && !ellipse(26873.228912, 25304.751770, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 16 03:32:51 2012] Writing fullrun_mos1_xmm0503480401_pi300-10000_pass1_cl_src1.gif
[Sat Jun 16 03:32:52 2012] Mean detx,y = (3814.83, -427.23) 
[Sat Jun 16 03:32:53 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 03:33:16 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 03:33:16 2012] Setting source spectrum file to fullrun_mos1_xmm0503480401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 16 03:33:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503480401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 16 03:33:58 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 16 03:33:58 2012] rmf not generated due to insufficient counts
[Sat Jun 16 03:40:54 2012] Updating aperture counts using extracted products
[Sat Jun 16 03:40:55 2012] Error reading totcts from fullrun_mos1_xmm0503480401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 16 03:40:55 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 03:40:55 2012] Using photon index=1.80, rate=0.00863, arf fullrun_mos1_xmm0503480401_pi300-10000_pass1_cl_src1.arf
[Sat Jun 16 03:40:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 03:40:55 2012] Updating source flux to 8.7e-14
[Sat Jun 16 03:40:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 16 03:40:56 2012] xmm0503480401/analysis//spectral/fullrun_mos1_xmm0503480401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete