[Sun May 12 01:14:21 2013] Detection parameters:
  Position = (162.4, 337.0) = 1 55 29.87 -8 57 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1732.8 +/- 49.6
  Background counts = 22.2
  Rate = 0.2 +/- 0.007

[Sun May 12 01:14:21 2013] Off-axis axis estimate = 10.25'
[Sun May 12 01:31:49 2013] Using EEF radius (= 11.55 ")to estimate initial spatial extent for simple fitting
[Sun May 12 01:31:49 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 12 01:31:49 2013] Initial guess for spatial extent in simple fitting = 11.55"
[Sun May 12 01:31:49 2013] source mask rpix=2.7, npix_max = 39, mask sum = 42, frac = 1.054
[Sun May 12 01:31:49 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.55"
[Sun May 12 01:38:16 2013] fullrun_mos2_xmm0503480201_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 12 01:38:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503480201_pi300-10000_cl_pass0_src1.csv
[Sun May 12 01:38:16 2013] fullrun_mos2_xmm0503480201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 12 01:38:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503480201_pi300-10000_cl_pass0_src1.csv
[Sun May 12 01:38:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503480201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503480201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 01:38:16 2013] fullrun_mos2_xmm0503480201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 12 01:38:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503480201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 12 01:38:16 2013] fullrun_mos2_xmm0503480201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 12 01:38:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503480201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 12 01:38:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503480201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503480201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 01:38:22 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.468661 pixels away
[Sun May 12 01:38:23 2013] Vigneting correction estimate = 1.000000
[Sun May 12 01:38:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 01:38:23 2013] Assessing source extent using major
[Sun May 12 01:38:23 2013] Source does appear to be extended
[Sun May 12 01:38:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 01:49:56 2013] Using EEF radius (= 11.55 ")to estimate initial spatial extent for simple fitting
[Sun May 12 01:49:56 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 12 01:49:56 2013] Initial guess for spatial extent in simple fitting = 11.55"
[Sun May 12 01:49:56 2013] source mask rpix=2.7, npix_max = 39, mask sum = 42, frac = 1.054
[Sun May 12 01:49:56 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 11.55"
[Sun May 12 01:56:51 2013] fullrun_mos2_xmm0503480201_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 12 01:56:51 2013] fullrun_mos2_xmm0503480201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 12 01:56:51 2013] Fit fullrun_mos2_xmm0503480201_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun May 12 01:56:51 2013] fullrun_mos2_xmm0503480201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 12 01:56:51 2013] fullrun_mos2_xmm0503480201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 12 01:56:51 2013] Fit fullrun_mos2_xmm0503480201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May 12 01:56:57 2013] Spatial fit model total counts = 1904.870000, observed total counts = 1859.000000
[Sun May 12 01:56:57 2013] Offset between fit and detection position for source 1 = 0.091468 pixels
[Sun May 12 01:56:57 2013] 1915.608000 total counts/ 670.248000 bgd. counts: snr = 48.103552
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.091468 pixels
  Position = (162.5, 337.0) = 1 55 29.85 -8 57 4.4
  Extent = 6.8 (6.4-7.2)" x 5.3 (5.0-5.6)", rotation angle = 93 (84-102) degrees
  Source counts = 1245.4 +/- 43.8
  Background counts = 670.2
  Rate = 0.1 +/- 0.003
[Sun May 12 01:56:57 2013] Vigneting correction estimate = 1.000000
[Sun May 12 01:56:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 01:56:57 2013] Assessing source extent using major axis lower bound
[Sun May 12 01:56:57 2013] Source does appear to be extended
[Sun May 12 01:56:57 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.14
[Sun May 12 02:09:26 2013] Counts = 1245.360000, rescaling region sizes by 2.000000
[Sun May 12 02:09:26 2013] XMMSAS src. selection expression = ellipse(14087.994800, 29274.768200, 819.742824, 635.317218, 92.798556, X, Y)
[Sun May 12 02:09:26 2013] Writing source region out to fullrun_mos2_xmm0503480201_pi300-10000_pass1_cl_src1_src.reg
[Sun May 12 02:09:26 2013] Extracting stamp from image fullrun_mos2_xmm0503480201_pi300-10000_cl_sm2.00.img.gz, (115, 290) - (210, 384)
[Sun May 12 02:09:26 2013] XMMSAS bgd. selection expression = annulus(14087.994800, 29274.768200, 2732.476079, 5464.952157, X, Y) && !ellipse(17304.240479, 29411.248413, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 02:09:26 2013] Writing fullrun_mos2_xmm0503480201_pi300-10000_pass1_cl_src1.gif
[Sun May 12 02:09:30 2013] Mean detx,y = (-10778.74, 1177.43) 
[Sun May 12 02:09:32 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 02:10:16 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 02:10:16 2013] Setting source spectrum file to fullrun_mos2_xmm0503480201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 12 02:10:16 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0503480201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun May 12 02:16:44 2013] Updating aperture counts using extracted products
[Sun May 12 02:16:44 2013] Total counts from fullrun_mos2_xmm0503480201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1595.00
[Sun May 12 02:16:44 2013] Total counts from fullrun_mos2_xmm0503480201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 6851.00
[Sun May 12 02:16:44 2013] Got source and background scale factors 1476408.000000, 66502470.000000
[Sun May 12 02:16:44 2013] User source parameters:
  Position = (162.5, 337.0) = 1 55 29.85 -8 57 4.4
  Extent = 6.8 (6.4-7.2)" x 5.3 (5.0-5.6)", rotation angle = 93 (84-102) degrees
  Source aperture counts = 1442.9 +/- 40.9
  Background aperture counts = 152.1
  Rate = 0.1 +/- 0.003

[Sun May 12 02:16:45 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 02:16:45 2013] Using photon index=1.80, rate=0.095, arf fullrun_mos2_xmm0503480201_pi300-10000_pass1_cl_src1.arf
[Sun May 12 02:16:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 02:16:45 2013] Updating source flux to 1.6e-12
[Sun May 12 02:16:50 2013] xmm0503480201/analysis//spectral/fullrun_mos2_xmm0503480201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete