[Thu May 24 17:06:49 2012] Detection parameters:
  Position = (97.8, 276.1) = 5 4 18.31 51 25 12.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.3 +/- 12.9
  Background counts = 24.6
  Rate = 0.001 +/- 0.0003

[Thu May 24 17:06:49 2012] Off-axis axis estimate = 14.64'
[Thu May 24 17:44:54 2012] Using EEF radius (= 13.75 ")to estimate initial spatial extent for simple fitting
[Thu May 24 17:44:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 24 17:44:54 2012] Initial guess for spatial extent in simple fitting = 13.75"
[Thu May 24 17:44:54 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.914
[Thu May 24 17:44:54 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 13.75"
[Thu May 24 18:00:47 2012] fullrun_mos2_xmm0503290101_pi300-10000_cl_pass0_src11.ximg exists
[Thu May 24 18:00:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0503290101_pi300-10000_cl_pass0_src11.csv
[Thu May 24 18:00:47 2012] fullrun_mos2_xmm0503290101_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu May 24 18:00:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0503290101_pi300-10000_cl_pass0_src11.csv
[Thu May 24 18:00:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503290101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503290101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 18:00:47 2012] fullrun_mos2_xmm0503290101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu May 24 18:00:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503290101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Thu May 24 18:00:47 2012] fullrun_mos2_xmm0503290101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu May 24 18:00:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503290101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Thu May 24 18:00:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503290101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503290101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 18:00:58 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.345007 pixels away
[Thu May 24 18:00:58 2012] Vigneting correction estimate = 1.000000
[Thu May 24 18:00:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 18:00:58 2012] Assessing source extent using major
[Thu May 24 18:00:58 2012] Source does appear to be extended
[Thu May 24 18:00:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 18:27:16 2012] Using EEF radius (= 13.75 ")to estimate initial spatial extent for simple fitting
[Thu May 24 18:27:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 24 18:27:16 2012] Initial guess for spatial extent in simple fitting = 13.75"
[Thu May 24 18:27:16 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.914
[Thu May 24 18:27:16 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.75"
[Thu May 24 18:39:26 2012] fullrun_mos2_xmm0503290101_pi300-10000_cl_pass1_src10.ximg exists
[Thu May 24 18:39:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503290101_pi300-10000_cl_pass1_src10.csv
[Thu May 24 18:39:26 2012] fullrun_mos2_xmm0503290101_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu May 24 18:39:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503290101_pi300-10000_cl_pass1_src10.csv
[Thu May 24 18:39:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503290101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503290101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 18:39:26 2012] fullrun_mos2_xmm0503290101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu May 24 18:39:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503290101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu May 24 18:39:26 2012] fullrun_mos2_xmm0503290101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu May 24 18:39:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503290101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu May 24 18:39:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503290101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503290101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 18:39:32 2012] Warning, spatial fit 10 centroid is now closest to src. 2
[Thu May 24 18:39:32 2012] Vigneting correction estimate = 1.000000
[Thu May 24 18:39:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 18:39:32 2012] Assessing source extent using major
[Thu May 24 18:39:32 2012] Source does appear to be extended
[Thu May 24 18:39:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 19:23:41 2012] XMMSAS src. selection expression = ellipse(8459.775024, 23974.059052, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 24 19:23:41 2012] Writing source region out to fullrun_mos2_xmm0503290101_pi300-10000_pass1_cl_src3_src.reg
[Thu May 24 19:23:41 2012] Extracting stamp from image fullrun_mos2_xmm0503290101_pi300-10000_cl_sm2.00.img.gz, (60, 239) - (135, 314)
[Thu May 24 19:23:41 2012] XMMSAS bgd. selection expression = annulus(8459.775024, 23974.059052, 1087.500000, 2175.000000, X, Y) && !ellipse(10985.157913, 25265.874176, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 24 19:23:41 2012] Writing fullrun_mos2_xmm0503290101_pi300-10000_pass1_cl_src3.gif
[Thu May 24 19:26:49 2012] Mean detx,y = (-16270.04, 250.26) 
[Thu May 24 19:26:51 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 19:27:18 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 19:27:18 2012] Setting source spectrum file to fullrun_mos2_xmm0503290101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 24 19:27:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503290101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu May 24 19:40:33 2012] Not generating rmf since there are only 72 counts
[Thu May 24 19:40:33 2012] rmf not generated due to insufficient counts
[Thu May 24 19:41:45 2012] Updating aperture counts using extracted products
[Thu May 24 19:41:45 2012] Error reading totcts from fullrun_mos2_xmm0503290101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 24 19:41:45 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 19:41:45 2012] Using photon index=1.80, rate=0.00143, arf fullrun_mos2_xmm0503290101_pi300-10000_pass1_cl_src3.arf
[Thu May 24 19:41:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 19:41:45 2012] Updating source flux to 3.6e-14
[Thu May 24 19:41:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting