[Wed Mar 7 15:36:19 2012] Detection parameters: Position = (227.2, 326.1) = 11 51 12.81 -62 37 32.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 126.5 +/- 21.0 Background counts = 124.2 Rate = 0.01 +/- 0.002 [Wed Mar 7 15:36:22 2012] Off-axis axis estimate = 5.54' [Wed Mar 7 15:43:44 2012] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting [Wed Mar 7 15:43:44 2012] Initial guess for spatial extent in simple fitting = 9.20" [Wed Mar 7 15:43:44 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.097 [Wed Mar 7 15:43:44 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 9.20" [Wed Mar 7 21:06:04 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src29.ximg exists [Wed Mar 7 21:06:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src29.csv [Wed Mar 7 21:06:04 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src29_1.ximg exists [Wed Mar 7 21:06:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src29.csv [Wed Mar 7 21:06:04 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src29_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Mar 7 21:06:07 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists [Wed Mar 7 21:06:07 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists [Wed Mar 7 21:06:07 2012] Fit fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly [Thu Mar 8 05:50:14 2012] Source 31 is offset by 3.670728 and 2.350866 pixels which is larger than 2 X fitted extent = 1.072639 x 1.072639, not incorporating fit results [Thu Mar 8 05:50:15 2012] Vigneting correction estimate = 1.000000 [Thu Mar 8 05:50:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Mar 8 05:50:15 2012] Assessing source extent using major [Thu Mar 8 05:50:15 2012] Source does appear to be extended [Thu Mar 8 05:50:15 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Mar 8 05:50:59 2012] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting [Thu Mar 8 05:50:59 2012] Initial guess for spatial extent in simple fitting = 9.20" [Thu Mar 8 05:50:59 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.097 [Thu Mar 8 05:50:59 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 9.20" [Thu Mar 8 11:11:30 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src28.ximg exists [Thu Mar 8 11:11:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src28.csv [Thu Mar 8 11:11:30 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src28_1.ximg exists [Thu Mar 8 11:11:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src28.csv [Thu Mar 8 11:11:30 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Mar 8 11:11:32 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src28.ximg exists [Thu Mar 8 11:11:32 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists [Thu Mar 8 11:11:32 2012] Fit fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly [Thu Mar 8 21:48:35 2012] Spatial fit model total counts = 1580.980000, observed total counts = 1576.000000 [Thu Mar 8 21:48:35 2012] Offset between fit and detection position for source 31 = 3.342153 pixels [Thu Mar 8 21:48:35 2012] Warning, changing simple spatial fit ID from 28 to 4 [Thu Mar 8 21:48:35 2012] 1632.213000 total counts/ 1468.430000 bgd. counts: snr = 4.274076 Spatial fit parameters: Offset between fit and detection position for source 31 = 3.342153 pixels Position = (226.8, 329.4) = 11 51 13.09 -62 37 21.2 Extent = 18.1 (18.1-36.3)", rotation angle = 0 Source counts = 163.8 +/- 40.4 Background counts = 1468.4 Rate = 0.04 +/- 0.009 [Thu Mar 8 21:48:35 2012] Source 31 is offset by -1.949763 and -0.620667 pixels which is larger than 2 X fitted extent = 1.057251 x 1.057251, not incorporating fit results [Thu Mar 8 21:48:36 2012] Vigneting correction estimate = 1.000000 [Thu Mar 8 21:48:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Mar 8 21:48:36 2012] Assessing source extent using major axis lower bound [Thu Mar 8 21:48:36 2012] Source does appear to be extended [Thu Mar 8 21:48:36 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Mar 8 21:48:36 2012] Source is confused with source 6 [Thu Mar 8 21:49:21 2012] XMMSAS src. selection expression = ellipse(19679.912000, 28607.460000, 1088.844031, 1088.844031, 0.000000, X, Y) [Thu Mar 8 21:49:21 2012] Writing source region out to fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src31_src.reg [Thu Mar 8 21:49:21 2012] Extracting stamp from image fullrun_pn_xmm0503220201_pi300-10000_cl_sm2.00.img.gz, (164, 267) - (289, 392) [Thu Mar 8 21:49:21 2012] XMMSAS bgd. selection expression = annulus(19679.912000, 28607.460000, 1814.740052, 3629.480104, X, Y) && !ellipse(20755.726000, 29707.452000, 1442.984042, 1442.984042, 0.000000, X, Y) && !ellipse(22349.210327, 30168.154785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20902.129089, 29349.710144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20325.304062, 28923.869995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21617.441772, 28375.375458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21727.022600, 26854.740000, 1304.608083, 1304.608083, 0.000000, X, Y) && !ellipse(15828.232000, 25740.108000, 1839.424053, 1839.424053, 0.000000, X, Y) && !ellipse(21871.174957, 25786.944916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21375.536000, 24940.920000, 1317.376038, 1317.376038, 0.000000, X, Y) && !ellipse(21555.699400, 25068.632000, 1317.376038, 1317.376038, 0.000000, X, Y) && !ellipse(21907.830200, 24973.964000, 1304.440038, 1304.440038, 0.000000, X, Y) && !ellipse(18949.850000, 23618.398000, 1555.136045, 1555.136045, 0.000000, X, Y) && !ellipse(22273.154600, 30654.970600, 1426.256041, 1426.256041, 0.000000, X, Y) && !ellipse(23854.604000, 32093.820000, 1454.416042, 1454.416042, 0.000000, X, Y) && !ellipse(24137.104401, 31007.799835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20275.291275, 30288.132904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19636.860000, 27047.784800, 1412.880041, 1412.880041, 0.000000, X, Y) && !ellipse(20863.060000, 25997.854000, 1390.728040, 1390.728040, 0.000000, X, Y) && !ellipse(20085.966446, 24228.047119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21845.232000, 23993.750000, 1352.320039, 974.256028, 69.528000, X, Y) [Thu Mar 8 21:49:21 2012] Writing fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src31.gif [Thu Mar 8 22:25:38 2012] Mean detx,y = (-4725.26, -4116.47) [Thu Mar 8 22:25:40 2012] Setting backscal keywords in source and bgd. spectrum [Thu Mar 8 22:26:20 2012] Binned source spectrum to 10 counts/bin [Thu Mar 8 22:26:20 2012] Setting source spectrum file to fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src31_src_b10.pi.gz [Thu Mar 8 22:26:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src31_bgd.pi.gz [Fri Mar 9 05:25:36 2012] Updating aperture counts using extracted products [Fri Mar 9 05:25:36 2012] Error reading totcts from fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src31_src_b10.pi.gz [Fri Mar 9 05:25:41 2012] Calculating source flux in energy range 0.30-8.00 [Fri Mar 9 05:25:41 2012] Using photon index=1.80, rate=0.037, arf fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src31.arf [Fri Mar 9 05:25:41 2012] Assuming count rate is from the 0.30-10.00 bandpass [Fri Mar 9 05:25:41 2012] Updating source flux to 1.3e-13 [Fri Mar 9 05:40:38 2012] Flag b found in src. 31 procflags, skipping spectral fitting [Fri Mar 9 05:40:38 2012] Flag c found in src. 31 procflags, skipping spectral fitting