[Wed Mar  7 15:36:19 2012] Detection parameters:
  Position = (256.9, 353.0) = 11 50 54.03 -62 35 37.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1122.4 +/- 46.4
  Background counts = 151.3
  Rate = 0.1 +/- 0.006

[Wed Mar  7 15:36:22 2012] Off-axis axis estimate = 4.97'
[Wed Mar  7 15:43:44 2012] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 15:43:44 2012] Initial guess for spatial extent in simple fitting = 8.91"
[Wed Mar  7 15:43:44 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.154
[Wed Mar  7 15:43:44 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 8.91"
[Wed Mar  7 21:06:04 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src28.ximg exists
[Wed Mar  7 21:06:04 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed Mar  7 21:06:04 2012] Fit fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src28 appears to have run properly
[Wed Mar  7 21:06:07 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed Mar  7 21:06:07 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed Mar  7 21:06:07 2012] Fit fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Thu Mar  8 05:50:14 2012] Spatial fit model total counts = 4082.430000, observed total counts = 3070.000000
[Thu Mar  8 05:50:14 2012] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar  8 05:50:14 2012] Spatial fit model total counts = 4571.290000, observed total counts = 4190.000000
[Thu Mar  8 05:50:14 2012] Offset between fit and detection position for source 30 = 0.393732 pixels
[Thu Mar  8 05:50:14 2012] 4582.808000 total counts/ 3760.550000 bgd. counts: snr = 13.408569
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.393732 pixels
  Position = (256.6, 352.9) = 11 50 54.27 -62 35 39.2
  Extent = 17.8 (17.8-35.7)", rotation angle = 0
  Source counts = 822.3 +/- 67.7
  Background counts = 3760.6
  Rate = 0.2 +/- 0.02
[Thu Mar  8 05:50:15 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 05:50:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 05:50:15 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 05:50:15 2012] Source does appear to be extended
[Thu Mar  8 05:50:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 05:50:15 2012] Source is confused with source 3
[Thu Mar  8 05:50:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar  8 05:50:59 2012] Initial guess for spatial extent in simple fitting = 17.83"
[Thu Mar  8 05:50:59 2012] source mask rpix=4.1, npix_max = 84, mask sum = 86, frac = 1.017
[Thu Mar  8 05:50:59 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 17.83"
[Thu Mar  8 11:11:30 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src27.ximg exists
[Thu Mar  8 11:11:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src27.csv
[Thu Mar  8 11:11:30 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src27_1.ximg exists
[Thu Mar  8 11:11:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src27.csv
[Thu Mar  8 11:11:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 11:11:32 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Thu Mar  8 11:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src27.csv
[Thu Mar  8 11:11:32 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Thu Mar  8 11:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src27.csv
[Thu Mar  8 11:11:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 21:48:35 2012] Warning, spatial fit 27 centroid is now closest to src. 3
[Thu Mar  8 21:48:36 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 21:48:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 21:48:36 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 21:48:36 2012] Source does appear to be extended
[Thu Mar  8 21:48:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 21:49:21 2012] XMMSAS src. selection expression = ellipse(22273.154600, 30654.970600, 1069.692031, 1069.692031, 0.000000, X, Y)
[Thu Mar  8 21:49:21 2012] Writing source region out to fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src30_src.reg
[Thu Mar  8 21:49:21 2012] Extracting stamp from image fullrun_pn_xmm0503220201_pi300-10000_cl_sm2.00.img.gz, (195, 291) - (318, 414)
[Thu Mar  8 21:49:21 2012] XMMSAS bgd. selection expression = annulus(22273.154600, 30654.970600, 1782.820051, 3565.640103, X, Y) && !ellipse(20755.726000, 29707.452000, 1442.984042, 1442.984042, 0.000000, X, Y) && !ellipse(22349.210327, 30168.154785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20902.129089, 29349.710144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20325.304062, 28923.869995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21617.441772, 28375.375458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21727.022600, 26854.740000, 1304.608083, 1304.608083, 0.000000, X, Y) && !ellipse(19679.912000, 28607.460000, 1451.792042, 1451.792042, 0.000000, X, Y) && !ellipse(23854.604000, 32093.820000, 1454.416042, 1454.416042, 0.000000, X, Y) && !ellipse(24783.893433, 32454.915588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24331.404755, 32478.144440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24664.318878, 31806.464508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25180.345062, 31619.762848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25171.822418, 31125.781372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24137.104401, 31007.799835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20275.291275, 30288.132904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19636.860000, 27047.784800, 1412.880041, 1412.880041, 0.000000, X, Y) && !ellipse(20863.060000, 25997.854000, 1390.728040, 1390.728040, 0.000000, X, Y)
[Thu Mar  8 21:49:21 2012] Writing fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src30.gif
[Thu Mar  8 22:24:45 2012] Mean detx,y = (-1371.55, -4496.71) 
[Thu Mar  8 22:24:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar  8 22:25:29 2012] Binned source spectrum to 10 counts/bin
[Thu Mar  8 22:25:29 2012] Setting source spectrum file to fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu Mar  8 22:25:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri Mar  9 05:25:36 2012] Updating aperture counts using extracted products
[Fri Mar  9 05:25:36 2012] Error reading totcts from fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Mar  9 05:25:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar  9 05:25:41 2012] Using photon index=1.80, rate=0.186, arf fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src30.arf
[Fri Mar  9 05:25:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar  9 05:25:41 2012] Updating source flux to 6.1e-13
[Fri Mar  9 05:40:38 2012] Flag p found in src. 30 procflags, skipping spectral fitting
[Fri Mar  9 05:40:38 2012] Flag c found in src. 30 procflags, skipping spectral fitting