[Wed Mar  7 15:36:19 2012] Detection parameters:
  Position = (338.7, 221.1) = 11 50 2.40 -62 45 13.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 330.7 +/- 30.8
  Background counts = 218.4
  Rate = 0.06 +/- 0.005

[Wed Mar  7 15:36:22 2012] Off-axis axis estimate = 6.32'
[Wed Mar  7 15:43:44 2012] Using EEF radius (= 9.59 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 15:43:44 2012] Initial guess for spatial extent in simple fitting = 9.59"
[Wed Mar  7 15:43:44 2012] source mask rpix=2.2, npix_max = 29, mask sum = 26, frac = 0.889
[Wed Mar  7 15:43:44 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 9.59"
[Wed Mar  7 21:06:03 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src21.ximg exists
[Wed Mar  7 21:06:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src21.csv
[Wed Mar  7 21:06:03 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src21_1.ximg exists
[Wed Mar  7 21:06:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src21.csv
[Wed Mar  7 21:06:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 21:06:06 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Wed Mar  7 21:06:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src21.csv
[Wed Mar  7 21:06:06 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Wed Mar  7 21:06:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src21.csv
[Wed Mar  7 21:06:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 05:50:14 2012] Spatial fit model total counts = 2716.760000, observed total counts = 2248.000000
[Thu Mar  8 05:50:14 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar  8 05:50:15 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 05:50:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 05:50:15 2012] Assessing source extent using major
[Thu Mar  8 05:50:15 2012] Source does appear to be extended
[Thu Mar  8 05:50:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 05:50:59 2012] Using EEF radius (= 9.59 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 05:50:59 2012] Initial guess for spatial extent in simple fitting = 9.59"
[Thu Mar  8 05:50:59 2012] source mask rpix=2.2, npix_max = 29, mask sum = 26, frac = 0.889
[Thu Mar  8 05:50:59 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 9.59"
[Thu Mar  8 11:11:30 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src20.ximg exists
[Thu Mar  8 11:11:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src20.csv
[Thu Mar  8 11:11:30 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu Mar  8 11:11:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src20.csv
[Thu Mar  8 11:11:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 11:11:32 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu Mar  8 11:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Mar  8 11:11:32 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Mar  8 11:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Mar  8 11:11:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 21:48:35 2012] Spatial fit model total counts = 2684.640000, observed total counts = 2248.000000
[Thu Mar  8 21:48:35 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar  8 21:48:36 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 21:48:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 21:48:36 2012] Assessing source extent using major
[Thu Mar  8 21:48:36 2012] Source does appear to be extended
[Thu Mar  8 21:48:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 21:49:21 2012] XMMSAS src. selection expression = ellipse(29416.553162, 19187.070435, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar  8 21:49:21 2012] Writing source region out to fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src23_src.reg
[Thu Mar  8 21:49:21 2012] Extracting stamp from image fullrun_pn_xmm0503220201_pi300-10000_cl_sm2.00.img.gz, (301, 184) - (376, 259)
[Thu Mar  8 21:49:21 2012] XMMSAS bgd. selection expression = annulus(29416.553162, 19187.070435, 1087.500000, 2175.000000, X, Y) && !ellipse(28102.823425, 20412.403625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28984.732000, 15305.572800, 1760.080051, 1760.080051, 0.000000, X, Y) && !ellipse(28149.614000, 21310.456000, 1109.088032, 1109.088032, 0.000000, X, Y) && !ellipse(27717.854797, 20058.952850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29956.187866, 18175.125931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29506.590515, 17757.136703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29781.080719, 17001.391907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28718.851288, 22187.615952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30851.705353, 22168.319199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29177.250061, 22143.839828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31829.740000, 22479.530000, 1476.032042, 1476.032042, 0.000000, X, Y) && !ellipse(30388.966000, 21501.076000, 2172.752063, 2172.752063, 0.000000, X, Y) && !ellipse(28632.104000, 21729.346000, 576.542417, 576.542417, 0.000000, X, Y) && !ellipse(26718.780548, 21506.172150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31067.306000, 21502.636000, 715.848021, 715.848021, 0.000000, X, Y) && !ellipse(30189.964800, 21077.451200, 1086.376031, 1086.376031, 0.000000, X, Y) && !ellipse(27400.026550, 20717.081512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26588.978821, 20675.850235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26710.820770, 18841.611298, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar  8 21:49:21 2012] Writing fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src23.gif
[Thu Mar  8 22:21:04 2012] Mean detx,y = (-1693.29, 9017.37) 
[Thu Mar  8 22:21:07 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar  8 22:21:32 2012] Binned source spectrum to 10 counts/bin
[Thu Mar  8 22:21:32 2012] Setting source spectrum file to fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Mar  8 22:21:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu Mar  8 23:40:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Mar  8 23:40:48 2012] rmf not generated due to insufficient counts
[Fri Mar  9 05:25:36 2012] Updating aperture counts using extracted products
[Fri Mar  9 05:25:36 2012] Error reading totcts from fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Mar  9 05:25:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar  9 05:25:40 2012] Using photon index=1.80, rate=0.0555, arf fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src23.arf
[Fri Mar  9 05:25:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar  9 05:25:40 2012] Updating source flux to 2.5e-13
[Fri Mar  9 05:40:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting