[Wed Mar  7 15:36:19 2012] Detection parameters:
  Position = (209.3, 233.0) = 11 51 24.35 -62 44 20.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 305.1 +/- 29.6
  Background counts = 142.9
  Rate = 0.03 +/- 0.003

[Wed Mar  7 15:36:22 2012] Off-axis axis estimate = 8.02'
[Wed Mar  7 15:43:44 2012] Using EEF radius (= 10.44 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 15:43:44 2012] Initial guess for spatial extent in simple fitting = 10.44"
[Wed Mar  7 15:43:44 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.070
[Wed Mar  7 15:43:44 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 10.44"
[Wed Mar  7 21:06:03 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src20.ximg exists
[Wed Mar  7 21:06:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src20.csv
[Wed Mar  7 21:06:03 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src20_1.ximg exists
[Wed Mar  7 21:06:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src20.csv
[Wed Mar  7 21:06:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 21:06:06 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Wed Mar  7 21:06:06 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Wed Mar  7 21:06:06 2012] Fit fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Thu Mar  8 05:50:14 2012] Warning, spatial fit 20 centroid is now closest to src. 79
[Thu Mar  8 05:50:15 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 05:50:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 05:50:15 2012] Assessing source extent using major
[Thu Mar  8 05:50:15 2012] Source does appear to be extended
[Thu Mar  8 05:50:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 05:50:15 2012] Source is confused with source 20
[Thu Mar  8 05:50:59 2012] Using EEF radius (= 10.44 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 05:50:59 2012] Initial guess for spatial extent in simple fitting = 10.44"
[Thu Mar  8 05:50:59 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.070
[Thu Mar  8 05:50:59 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 10.44"
[Thu Mar  8 11:11:30 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src19.ximg exists
[Thu Mar  8 11:11:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src19.csv
[Thu Mar  8 11:11:30 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src19_1.ximg exists
[Thu Mar  8 11:11:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src19.csv
[Thu Mar  8 11:11:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 11:11:32 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Thu Mar  8 11:11:32 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Mar  8 11:11:32 2012] Fit fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Thu Mar  8 21:48:35 2012] Spatial fit model total counts = 4876.420000, observed total counts = 4869.000000
[Thu Mar  8 21:48:35 2012] Offset between fit and detection position for source 22 = 3.375517 pixels
[Thu Mar  8 21:48:35 2012] Warning, changing simple spatial fit ID from 19 to 17
[Thu Mar  8 21:48:35 2012] 4873.270000 total counts/ 2393.360000 bgd. counts: snr = 50.691122
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 3.375517 pixels
  Position = (208.4, 236.2) = 11 51 24.91 -62 44 6.2
  Extent = 42.9 (42.8-85.7)", rotation angle = 0
  Source counts = 2479.9 +/- 69.8
  Background counts = 2393.4
  Rate = 0.6 +/- 0.02
[Thu Mar  8 21:48:36 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 21:48:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 21:48:36 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 21:48:36 2012] Source does appear to be extended
[Thu Mar  8 21:48:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 21:49:21 2012] Counts = 2479.910000, rescaling region sizes by 2.000000
[Thu Mar  8 21:49:21 2012] XMMSAS src. selection expression = ellipse(18078.888000, 20503.940400, 5144.976148, 5144.976148, 0.000000, X, Y)
[Thu Mar  8 21:49:21 2012] Writing source region out to fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src22_src.reg
[Thu Mar  8 21:49:21 2012] Extracting stamp from image fullrun_pn_xmm0503220201_pi300-10000_cl_sm2.00.img.gz, (0, 0) - (504, 532)
[Thu Mar  8 21:49:21 2012] XMMSAS bgd. selection expression = annulus(18078.888000, 20503.940400, 17149.920493, 34299.840987, X, Y) && !ellipse(28102.823425, 20412.403625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20755.726000, 29707.452000, 1442.984042, 1442.984042, 0.000000, X, Y) && !ellipse(22349.210327, 30168.154785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20902.129089, 29349.710144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20325.304062, 28923.869995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21617.441772, 28375.375458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32194.836884, 27562.007233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28984.732000, 15305.572800, 1760.080051, 1760.080051, 0.000000, X, Y) && !ellipse(21727.022600, 26854.740000, 1304.608083, 1304.608083, 0.000000, X, Y) && !ellipse(15828.232000, 25740.108000, 1839.424053, 1839.424053, 0.000000, X, Y) && !ellipse(21871.174957, 25786.944916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21375.536000, 24940.920000, 1317.376038, 1317.376038, 0.000000, X, Y) && !ellipse(21555.699400, 25068.632000, 1317.376038, 1317.376038, 0.000000, X, Y) && !ellipse(21907.830200, 24973.964000, 1304.440038, 1304.440038, 0.000000, X, Y) && !ellipse(32741.456970, 24574.780670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18949.850000, 23618.398000, 1555.136045, 1555.136045, 0.000000, X, Y) && !ellipse(30355.438000, 22716.192000, 710.212020, 710.212020, 0.000000, X, Y) && !ellipse(28149.614000, 21310.456000, 1109.088032, 1109.088032, 0.000000, X, Y) && !ellipse(17143.708000, 20740.416000, 1703.104049, 1703.104049, 0.000000, X, Y) && !ellipse(27717.854797, 20058.952850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29416.553162, 19187.070435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29956.187866, 18175.125931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29506.590515, 17757.136703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29781.080719, 17001.391907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29613.455444, 16132.692871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28590.254944, 15273.898422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22273.154600, 30654.970600, 1426.256041, 1426.256041, 0.000000, X, Y) && !ellipse(19679.912000, 28607.460000, 1451.792042, 1451.792042, 0.000000, X, Y) && !ellipse(19861.636383, 23619.782562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16932.953217, 21258.513672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23854.604000, 32093.820000, 1454.416042, 1454.416042, 0.000000, X, Y) && !ellipse(30573.530642, 35058.111200, 792.737623, 792.737623, 0.000000, X, Y) && !ellipse(30874.371338, 33706.621185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30358.854919, 33865.474243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28854.820648, 33704.444061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31034.419159, 33347.470062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30995.193756, 32830.363281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30510.289825, 32896.226593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24783.893433, 32454.915588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24331.404755, 32478.144440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24664.318878, 31806.464508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25180.345062, 31619.762848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25171.822418, 31125.781372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24137.104401, 31007.799835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20275.291275, 30288.132904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28022.506134, 14823.416946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19636.860000, 27047.784800, 1412.880041, 1412.880041, 0.000000, X, Y) && !ellipse(20863.060000, 25997.854000, 1390.728040, 1390.728040, 0.000000, X, Y) && !ellipse(33493.783417, 25647.500122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20085.966446, 24228.047119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31999.108124, 23789.967285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21004.002563, 23707.356049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21845.232000, 23993.750000, 1352.320039, 974.256028, 69.528000, X, Y) && !ellipse(18501.013519, 23193.015808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20909.405197, 22586.330994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30163.377000, 22875.822800, 1420.424041, 1420.424041, 0.000000, X, Y) && !ellipse(26004.681213, 22648.604706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28718.851288, 22187.615952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30851.705353, 22168.319199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29177.250061, 22143.839828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31829.740000, 22479.530000, 1476.032042, 1476.032042, 0.000000, X, Y) && !ellipse(30388.966000, 21501.076000, 2172.752063, 2172.752063, 0.000000, X, Y) && !ellipse(28632.104000, 21729.346000, 576.542417, 576.542417, 0.000000, X, Y) && !ellipse(26718.780548, 21506.172150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31067.306000, 21502.636000, 715.848021, 715.848021, 0.000000, X, Y) && !ellipse(26254.511505, 21353.251755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30189.964800, 21077.451200, 1086.376031, 1086.376031, 0.000000, X, Y) && !ellipse(27400.026550, 20717.081512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26588.978821, 20675.850235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26710.820770, 18841.611298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27418.882568, 15571.605530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21778.231674, 12262.124786, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar  8 21:49:21 2012] Writing fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src22.gif
[Thu Mar  8 22:08:41 2012] Mean detx,y = (-10084.52, 1549.59) 
[Thu Mar  8 22:08:46 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar  8 22:20:55 2012] Binned source spectrum to 10 counts/bin
[Thu Mar  8 22:20:56 2012] Setting source spectrum file to fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu Mar  8 22:20:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Fri Mar  9 05:25:36 2012] Updating aperture counts using extracted products
[Fri Mar  9 05:25:36 2012] Error reading totcts from fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Fri Mar  9 05:25:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar  9 05:25:40 2012] Using photon index=1.80, rate=0.559, arf fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src22.arf
[Fri Mar  9 05:25:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar  9 05:25:40 2012] Updating source flux to 2.3e-12
[Fri Mar  9 05:40:38 2012] Flag c found in src. 22 procflags, skipping spectral fitting