[Wed Mar  7 15:36:18 2012] Detection parameters:
  Position = (238.7, 344.5) = 11 51 5.54 -62 36 11.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 202.9 +/- 20.4
  Background counts = 112.0
  Rate = 0.02 +/- 0.002

[Wed Mar  7 15:36:22 2012] Off-axis axis estimate = 5.47'
[Wed Mar  7 15:43:44 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 15:43:44 2012] Initial guess for spatial extent in simple fitting = 9.16"
[Wed Mar  7 15:43:44 2012] source mask rpix=2.1, npix_max = 27, mask sum = 23, frac = 0.846
[Wed Mar  7 15:43:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.16"
[Wed Mar  7 21:06:03 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar  7 21:06:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src1.csv
[Wed Mar  7 21:06:03 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar  7 21:06:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src1.csv
[Wed Mar  7 21:06:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 21:06:06 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar  7 21:06:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Mar  7 21:06:06 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar  7 21:06:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Mar  7 21:06:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 05:50:14 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Thu Mar  8 05:50:14 2012] Spatial fit model total counts = 1580.540000, observed total counts = 1576.000000
[Thu Mar  8 05:50:14 2012] Offset between fit and detection position for source 2 = 2.496884 pixels
[Thu Mar  8 05:50:14 2012] Warning, changing simple spatial fit ID from 1 to 5
[Thu Mar  8 05:50:14 2012] 1580.062000 total counts/ 1434.570000 bgd. counts: snr = 3.841300
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.496884 pixels
  Position = (239.1, 342.0) = 11 51 5.27 -62 36 26.4
  Extent = 18.0 (17.8-18.1)", rotation angle = 0
  Source counts = 145.5 +/- 39.7
  Background counts = 1434.6
  Rate = 0.03 +/- 0.009
[Thu Mar  8 05:50:14 2012] Spatial fit model total counts = 1355.010000, observed total counts = 1024.000000
[Thu Mar  8 05:50:14 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar  8 05:50:15 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 05:50:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 05:50:15 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 05:50:15 2012] Source does appear to be extended
[Thu Mar  8 05:50:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 05:50:15 2012] Source is confused with source 4
[Thu Mar  8 05:50:15 2012] Source is confused with source 6
[Thu Mar  8 05:50:15 2012] Source is confused with source 50
[Thu Mar  8 05:50:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar  8 05:50:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar  8 05:50:59 2012] Initial guess for spatial extent in simple fitting = 18.04"
[Thu Mar  8 05:50:59 2012] source mask rpix=4.1, npix_max = 86, mask sum = 84, frac = 0.973
[Thu Mar  8 05:50:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 18.04"
[Thu Mar  8 11:11:29 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar  8 11:11:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src1.csv
[Thu Mar  8 11:11:29 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar  8 11:11:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src1.csv
[Thu Mar  8 11:11:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 11:11:31 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar  8 11:11:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Mar  8 11:11:31 2012] fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar  8 11:11:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Mar  8 11:11:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 21:48:35 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Thu Mar  8 21:48:35 2012] Spatial fit model total counts = 1888.160000, observed total counts = 1595.000000
[Thu Mar  8 21:48:35 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar  8 21:48:36 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 21:48:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 21:48:36 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 21:48:36 2012] Source does appear to be extended
[Thu Mar  8 21:48:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 21:49:20 2012] XMMSAS src. selection expression = ellipse(20755.726000, 29707.452000, 1082.238031, 1082.238031, 0.000000, X, Y)
[Thu Mar  8 21:49:20 2012] Writing source region out to fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src2_src.reg
[Thu Mar  8 21:49:20 2012] Extracting stamp from image fullrun_pn_xmm0503220201_pi300-10000_cl_sm2.00.img.gz, (177, 280) - (301, 404)
[Thu Mar  8 21:49:20 2012] XMMSAS bgd. selection expression = annulus(20755.726000, 29707.452000, 1803.730052, 3607.460104, X, Y) && !ellipse(22349.210327, 30168.154785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20902.129089, 29349.710144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20325.304062, 28923.869995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21617.441772, 28375.375458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21727.022600, 26854.740000, 1304.608083, 1304.608083, 0.000000, X, Y) && !ellipse(15828.232000, 25740.108000, 1839.424053, 1839.424053, 0.000000, X, Y) && !ellipse(21871.174957, 25786.944916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21375.536000, 24940.920000, 1317.376038, 1317.376038, 0.000000, X, Y) && !ellipse(21555.699400, 25068.632000, 1317.376038, 1317.376038, 0.000000, X, Y) && !ellipse(21907.830200, 24973.964000, 1304.440038, 1304.440038, 0.000000, X, Y) && !ellipse(22273.154600, 30654.970600, 1426.256041, 1426.256041, 0.000000, X, Y) && !ellipse(19679.912000, 28607.460000, 1451.792042, 1451.792042, 0.000000, X, Y) && !ellipse(23854.604000, 32093.820000, 1454.416042, 1454.416042, 0.000000, X, Y) && !ellipse(24783.893433, 32454.915588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24331.404755, 32478.144440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24664.318878, 31806.464508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25180.345062, 31619.762848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25171.822418, 31125.781372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24137.104401, 31007.799835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20275.291275, 30288.132904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19636.860000, 27047.784800, 1412.880041, 1412.880041, 0.000000, X, Y) && !ellipse(20863.060000, 25997.854000, 1390.728040, 1390.728040, 0.000000, X, Y)
[Thu Mar  8 21:49:20 2012] Writing fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src2.gif
[Thu Mar  8 21:50:02 2012] Mean detx,y = (-3510.34, -4435.20) 
[Thu Mar  8 21:50:04 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar  8 21:50:28 2012] Binned source spectrum to 10 counts/bin
[Thu Mar  8 21:50:28 2012] Setting source spectrum file to fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Mar  8 21:50:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Mar  9 05:25:35 2012] Updating aperture counts using extracted products
[Fri Mar  9 05:25:35 2012] Error reading totcts from fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Mar  9 05:25:39 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar  9 05:25:39 2012] Using photon index=1.80, rate=0.0328, arf fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src2.arf
[Fri Mar  9 05:25:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar  9 05:25:39 2012] Updating source flux to 1.2e-13
[Fri Mar  9 05:40:38 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Fri Mar  9 05:40:38 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Fri Mar  9 05:51:26 2012] Reading fit data from xmm0503220201/analysis//spectral/fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src2_pl.csv
[Fri Mar  9 05:51:26 2012] Spectral fit parameter nH value = 9.11658e+21
[Fri Mar  9 05:51:26 2012] Spectral fit parameter PhoIndex value = 9.972
[Fri Mar  9 05:51:26 2012] Failed to get F(0.3-8.0) from xmm0503220201/analysis//spectral/fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Mar  9 05:51:26 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar  9 05:51:26 2012] Using Nh = 9.1e+21, photon index=9.97, rate=0.0328, arf fullrun_pn_xmm0503220201_pi300-10000_pass1_cl_src2.arf
[Fri Mar  9 05:51:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar  9 05:51:26 2012] Updating source flux to 5.9e-14