[Wed Mar  7 15:38:47 2012] Detection parameters:
  Position = (167.6, 249.4) = 11 51 50.64 -62 43 0.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.0 +/- 13.5
  Background counts = 44.5
  Rate = 0.005 +/- 0.001

[Wed Mar  7 15:38:47 2012] Off-axis axis estimate = 10.13'
[Thu Mar  8 00:46:58 2012] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:46:58 2012] Initial guess for spatial extent in simple fitting = 11.49"
[Thu Mar  8 00:46:58 2012] source mask rpix=2.6, npix_max = 39, mask sum = 48, frac = 1.216
[Thu Mar  8 00:46:58 2012] Giving source the simple spatial ID 76 for pass 0, mean size = 11.49"
[Thu Mar  8 05:49:56 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src76.ximg exists
[Thu Mar  8 05:49:56 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src76_1.ximg exists
[Thu Mar  8 05:49:56 2012] Fit fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src76 appears to have run properly
[Thu Mar  8 05:49:57 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src76.ximg exists
[Thu Mar  8 05:49:57 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src76_1.ximg exists
[Thu Mar  8 05:49:57 2012] Fit fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src76 appears to have run properly
[Thu Mar  8 05:50:41 2012] Spatial fit model total counts = 410.140000, observed total counts = 404.000000
[Thu Mar  8 05:50:41 2012] Offset between fit and detection position for source 69 = 8.058390 pixels
[Thu Mar  8 05:50:41 2012] 424.177000 total counts/ 293.805000 bgd. counts: snr = 7.605972
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 8.058390 pixels
  Position = (159.7, 250.6) = 11 51 55.69 -62 43 2.7
  Extent = 23.0 (23.0-46.0)", rotation angle = 0
  Source counts = 130.4 +/- 20.6
  Background counts = 293.8
  Rate = 0.01 +/- 0.002
[Thu Mar  8 05:50:41 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 05:50:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 05:50:41 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 05:50:41 2012] Source does appear to be extended
[Thu Mar  8 05:50:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 15:01:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar  8 15:01:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar  8 15:01:08 2012] Initial guess for spatial extent in simple fitting = 22.98"
[Thu Mar  8 15:01:08 2012] source mask rpix=5.3, npix_max = 133, mask sum = 117, frac = 0.874
[Thu Mar  8 15:01:08 2012] Giving source the simple spatial ID 68 for pass 1, mean size = 22.98"
[Thu Mar  8 21:48:15 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src68.ximg exists
[Thu Mar  8 21:48:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src68.csv
[Thu Mar  8 21:48:15 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src68_1.ximg exists
[Thu Mar  8 21:48:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src68.csv
[Thu Mar  8 21:48:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 21:48:17 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Thu Mar  8 21:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src68.csv
[Thu Mar  8 21:48:17 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Thu Mar  8 21:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src68.csv
[Thu Mar  8 21:48:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 21:49:02 2012] Warning, spatial fit 68 centroid is now closest to src. 70
[Thu Mar  8 21:49:02 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 21:49:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 21:49:02 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 21:49:02 2012] Source does appear to be extended
[Thu Mar  8 21:49:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 01:23:07 2012] XMMSAS src. selection expression = ellipse(13841.628000, 21753.369200, 1379.052040, 1379.052040, 0.000000, X, Y)
[Fri Mar  9 01:23:07 2012] Writing source region out to fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src69_src.reg
[Fri Mar  9 01:23:07 2012] Extracting stamp from image fullrun_mos2_xmm0503220201_pi300-10000_cl_sm2.00.img.gz, (80, 171) - (239, 330)
[Fri Mar  9 01:23:07 2012] XMMSAS bgd. selection expression = annulus(13841.628000, 21753.369200, 2298.420066, 4596.840132, X, Y) && !ellipse(19517.151000, 23582.200600, 1473.752042, 1473.752042, 0.000000, X, Y) && !ellipse(19051.596000, 23426.481400, 1533.240044, 1533.240044, 0.000000, X, Y) && !ellipse(17928.463089, 21313.796692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17584.828000, 20365.171600, 1697.120049, 696.299220, 1.688000, X, Y) && !ellipse(17792.902000, 20490.648000, 2867.904083, 2867.904083, 0.000000, X, Y) && !ellipse(15575.572144, 25881.137390, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar  9 01:23:07 2012] Writing fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src69.gif
[Fri Mar  9 02:45:40 2012] Mean detx,y = (13467.83, 1222.34) 
[Fri Mar  9 02:45:41 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 02:46:09 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 02:46:09 2012] Setting source spectrum file to fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Fri Mar  9 02:46:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Fri Mar  9 05:25:52 2012] Updating aperture counts using extracted products
[Fri Mar  9 05:25:52 2012] Error reading totcts from fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Fri Mar  9 05:25:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar  9 05:25:55 2012] Using photon index=1.80, rate=0.012, arf fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src69.arf
[Fri Mar  9 05:25:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar  9 05:25:55 2012] Updating source flux to 2.9e-13