[Wed Mar  7 15:38:46 2012] Detection parameters:
  Position = (334.6, 256.4) = 11 50 5.02 -62 42 38.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.4 +/- 15.6
  Background counts = 107.7
  Rate = 0.01 +/- 0.002

[Wed Mar  7 15:38:47 2012] Off-axis axis estimate = 4.02'
[Thu Mar  8 00:46:58 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:46:58 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Thu Mar  8 00:46:58 2012] source mask rpix=1.9, npix_max = 23, mask sum = 18, frac = 0.756
[Thu Mar  8 00:46:58 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 8.44"
[Thu Mar  8 05:49:55 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src34.ximg exists
[Thu Mar  8 05:49:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src34.csv
[Thu Mar  8 05:49:55 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src34_1.ximg exists
[Thu Mar  8 05:49:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src34.csv
[Thu Mar  8 05:49:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 05:49:56 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Thu Mar  8 05:49:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src34.csv
[Thu Mar  8 05:49:56 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Thu Mar  8 05:49:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src34.csv
[Thu Mar  8 05:49:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 05:50:40 2012] Spatial fit model total counts = 1083.190000, observed total counts = 832.000000
[Thu Mar  8 05:50:40 2012] Poor agreement between spatial fit and data for source 68
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar  8 05:50:40 2012] Source 68 is offset by 1.872565 and -1.098729 pixels which is larger than
2 X fitted extent = 0.970060 x 0.970060, not incorporating fit results
[Thu Mar  8 05:50:41 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 05:50:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 05:50:41 2012] Assessing source extent using major
[Thu Mar  8 05:50:41 2012] Source does appear to be extended
[Thu Mar  8 05:50:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 15:01:08 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 15:01:08 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Thu Mar  8 15:01:08 2012] source mask rpix=1.9, npix_max = 23, mask sum = 18, frac = 0.756
[Thu Mar  8 15:01:08 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 8.44"
[Thu Mar  8 21:48:14 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src29.ximg exists
[Thu Mar  8 21:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src29.csv
[Thu Mar  8 21:48:14 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src29_1.ximg exists
[Thu Mar  8 21:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src29.csv
[Thu Mar  8 21:48:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 21:48:16 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Thu Mar  8 21:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src29.csv
[Thu Mar  8 21:48:16 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Thu Mar  8 21:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src29.csv
[Thu Mar  8 21:48:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 21:49:02 2012] Spatial fit model total counts = 1085.120000, observed total counts = 832.000000
[Thu Mar  8 21:49:02 2012] Poor agreement between spatial fit and data for source 68
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar  8 21:49:02 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 21:49:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 21:49:02 2012] Assessing source extent using major
[Thu Mar  8 21:49:02 2012] Source does appear to be extended
[Thu Mar  8 21:49:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 01:23:05 2012] XMMSAS src. selection expression = ellipse(29060.309296, 22254.542603, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar  9 01:23:05 2012] Writing source region out to fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src68_src.reg
[Fri Mar  9 01:23:05 2012] Extracting stamp from image fullrun_mos2_xmm0503220201_pi300-10000_cl_sm2.00.img.gz, (297, 219) - (372, 294)
[Fri Mar  9 01:23:05 2012] XMMSAS bgd. selection expression = annulus(29060.309296, 22254.542603, 1087.500000, 2175.000000, X, Y) && !ellipse(32561.506000, 24617.448000, 1332.984038, 1332.984038, 0.000000, X, Y) && !ellipse(27808.436000, 20592.524000, 1442.272042, 1442.272042, 0.000000, X, Y) && !ellipse(29059.866000, 19405.168000, 1460.664042, 1460.664042, 0.000000, X, Y) && !ellipse(28256.942000, 20064.282000, 2723.640078, 2723.640078, 0.000000, X, Y) && !ellipse(29528.008636, 22757.203369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28393.196000, 19350.668200, 1523.936044, 1523.936044, 0.000000, X, Y) && !ellipse(28773.746674, 20098.410568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30564.778992, 23339.833618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25998.880600, 22770.418600, 926.400027, 926.400027, 0.000000, X, Y) && !ellipse(31743.065063, 25009.331970, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar  9 01:23:05 2012] Writing fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src68.gif
[Fri Mar  9 02:29:29 2012] Mean detx,y = (489.10, -6294.10) 
[Fri Mar  9 02:29:30 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 02:29:44 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 02:29:44 2012] Setting source spectrum file to fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Fri Mar  9 02:29:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Fri Mar  9 04:17:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar  9 04:17:30 2012] rmf not generated due to insufficient counts
[Fri Mar  9 05:25:50 2012] Updating aperture counts using extracted products
[Fri Mar  9 05:25:50 2012] Error reading totcts from fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Fri Mar  9 05:25:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar  9 05:25:53 2012] Using photon index=1.80, rate=0.0119, arf fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src68.arf
[Fri Mar  9 05:25:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar  9 05:25:53 2012] Updating source flux to 1.8e-13
[Fri Mar  9 05:30:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting