[Wed Mar  7 15:38:46 2012] Detection parameters:
  Position = (234.4, 275.9) = 11 51 8.38 -62 41 7.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.2 +/- 13.7
  Background counts = 75.6
  Rate = 0.01 +/- 0.002

[Wed Mar  7 15:38:47 2012] Off-axis axis estimate = 4.92'
[Thu Mar  8 00:46:58 2012] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:46:58 2012] Initial guess for spatial extent in simple fitting = 8.89"
[Thu Mar  8 00:46:58 2012] source mask rpix=2.0, npix_max = 25, mask sum = 22, frac = 0.850
[Thu Mar  8 00:46:58 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 8.89"
[Thu Mar  8 05:49:55 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src43.ximg exists
[Thu Mar  8 05:49:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src43.csv
[Thu Mar  8 05:49:55 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src43_1.ximg exists
[Thu Mar  8 05:49:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src43.csv
[Thu Mar  8 05:49:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 05:49:57 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Thu Mar  8 05:49:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src43.csv
[Thu Mar  8 05:49:57 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Thu Mar  8 05:49:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src43.csv
[Thu Mar  8 05:49:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 05:50:40 2012] Spatial fit model total counts = 1097.710000, observed total counts = 998.000000
[Thu Mar  8 05:50:40 2012] Offset between fit and detection position for source 60 = 1.347200 pixels
[Thu Mar  8 05:50:40 2012] Warning, changing simple spatial fit ID from 43 to 32
[Thu Mar  8 05:50:40 2012] 1103.229600 total counts/ 1087.610000 bgd. counts: snr = 0.473624
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 1.347200 pixels
  Position = (233.1, 276.4) = 11 51 9.17 -62 41 11.6
  Extent = 4.1 (2.1-17.1)", rotation angle = 0
  Source counts = 15.6 +/- 33.2
  Background counts = 1087.6
  Rate = 0.001 +/- 0.003
  Deleting source due to low Poisson probability