[Wed Mar  7 15:38:45 2012] Detection parameters:
  Position = (237.9, 288.2) = 11 51 6.12 -62 40 15.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.7 +/- 17.9
  Background counts = 76.0
  Rate = 0.008 +/- 0.002

[Wed Mar  7 15:38:47 2012] Off-axis axis estimate = 4.45'
[Thu Mar  8 00:46:58 2012] Using EEF radius (= 8.65 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:46:58 2012] Initial guess for spatial extent in simple fitting = 8.65"
[Thu Mar  8 00:46:58 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.009
[Thu Mar  8 00:46:58 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 8.65"
[Thu Mar  8 05:49:55 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src55.ximg exists
[Thu Mar  8 05:49:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src55.csv
[Thu Mar  8 05:49:55 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src55_1.ximg exists
[Thu Mar  8 05:49:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src55.csv
[Thu Mar  8 05:49:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 05:49:57 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Thu Mar  8 05:49:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src55.csv
[Thu Mar  8 05:49:57 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Thu Mar  8 05:49:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src55.csv
[Thu Mar  8 05:49:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 05:50:40 2012] Spatial fit model total counts = 1477.830000, observed total counts = 1474.000000
[Thu Mar  8 05:50:40 2012] Offset between fit and detection position for source 53 = 2.824807 pixels
[Thu Mar  8 05:50:40 2012] Warning, changing simple spatial fit ID from 55 to 17
[Thu Mar  8 05:50:40 2012] 1520.099700 total counts/ 1486.390000 bgd. counts: snr = 0.874356
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 2.824807 pixels
  Position = (240.5, 289.3) = 11 51 4.49 -62 40 15.6
  Extent = 7.0 (3.2-10.3)", rotation angle = 0
  Source counts = 33.7 +/- 39.0
  Background counts = 1486.4
  Rate = 0.003 +/- 0.004
  Deleting source due to low Poisson probability