[Wed Mar  7 15:38:45 2012] Detection parameters:
  Position = (231.3, 348.9) = 11 51 10.22 -62 35 56.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.2 +/- 16.2
  Background counts = 62.5
  Rate = 0.008 +/- 0.002

[Wed Mar  7 15:38:47 2012] Off-axis axis estimate = 6.09'
[Thu Mar  8 00:46:58 2012] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:46:58 2012] Initial guess for spatial extent in simple fitting = 9.47"
[Thu Mar  8 00:46:58 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.046
[Thu Mar  8 00:46:58 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 9.47"
[Thu Mar  8 05:49:55 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src52.ximg exists
[Thu Mar  8 05:49:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src52.csv
[Thu Mar  8 05:49:55 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src52_1.ximg exists
[Thu Mar  8 05:49:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src52.csv
[Thu Mar  8 05:49:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 05:49:57 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Thu Mar  8 05:49:57 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Thu Mar  8 05:49:57 2012] Fit fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly
[Thu Mar  8 05:50:41 2012] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 10.941997 pixels away
[Thu Mar  8 05:50:41 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 05:50:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 05:50:41 2012] Assessing source extent using major
[Thu Mar  8 05:50:41 2012] Source does appear to be extended
[Thu Mar  8 05:50:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 15:01:08 2012] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 15:01:08 2012] Initial guess for spatial extent in simple fitting = 9.47"
[Thu Mar  8 15:01:08 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.046
[Thu Mar  8 15:01:08 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 9.47"
[Thu Mar  8 21:48:14 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src46.ximg exists
[Thu Mar  8 21:48:14 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src46_1.ximg exists
[Thu Mar  8 21:48:14 2012] Fit fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src46 appears to have run properly
[Thu Mar  8 21:48:16 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Thu Mar  8 21:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src46.csv
[Thu Mar  8 21:48:16 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Thu Mar  8 21:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src46.csv
[Thu Mar  8 21:48:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 21:49:02 2012] Warning, spatial fit 46 centroid is now closest to src. 6
[Thu Mar  8 21:49:02 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 21:49:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 21:49:02 2012] Assessing source extent using major
[Thu Mar  8 21:49:02 2012] Source does appear to be extended
[Thu Mar  8 21:49:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 01:23:06 2012] XMMSAS src. selection expression = ellipse(20071.440781, 30307.671265, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar  9 01:23:06 2012] Writing source region out to fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src46_src.reg
[Fri Mar  9 01:23:06 2012] Extracting stamp from image fullrun_mos2_xmm0503220201_pi300-10000_cl_sm2.00.img.gz, (194, 311) - (269, 386)
[Fri Mar  9 01:23:06 2012] XMMSAS bgd. selection expression = annulus(20071.440781, 30307.671265, 1087.500000, 2175.000000, X, Y) && !ellipse(21866.559440, 26928.682800, 1307.312038, 1307.312038, 0.000000, X, Y) && !ellipse(22269.008000, 30804.674000, 2926.816084, 1809.968052, 125.529000, X, Y) && !ellipse(21989.574000, 29123.821000, 803.560023, 803.560023, 0.000000, X, Y) && !ellipse(22053.434200, 29987.060000, 1607.120046, 1607.120046, 0.000000, X, Y) && !ellipse(22062.588600, 29145.896000, 1343.792039, 1343.792039, 0.000000, X, Y) && !ellipse(21195.414246, 30050.802490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21768.169600, 25666.410000, 2668.848077, 2668.848077, 0.000000, X, Y) && !ellipse(21426.915543, 29357.120331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21441.960266, 28058.813660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23023.492000, 32059.566000, 2919.664084, 2919.664084, 0.000000, X, Y) && !ellipse(21685.851400, 28772.744000, 2794.512080, 2794.512080, 0.000000, X, Y) && !ellipse(22553.154000, 31332.352000, 1463.408042, 1463.408042, 0.000000, X, Y) && !ellipse(20604.068863, 29523.341095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20135.096000, 29096.850000, 1083.624031, 1083.624031, 0.000000, X, Y) && !ellipse(20569.498000, 31882.952000, 1517.536044, 1517.536044, 0.000000, X, Y) && !ellipse(21366.680000, 32835.976000, 1531.584044, 1531.584044, 0.000000, X, Y) && !ellipse(23278.082000, 32747.458000, 1485.824043, 1485.824043, 0.000000, X, Y)
[Fri Mar  9 01:23:06 2012] Writing fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src46.gif
[Fri Mar  9 02:37:17 2012] Mean detx,y = (3727.14, 5173.31) 
[Fri Mar  9 02:37:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 02:37:39 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 02:37:39 2012] Setting source spectrum file to fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Fri Mar  9 02:37:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Fri Mar  9 04:50:00 2012] Not generating rmf since there are only 78 counts
[Fri Mar  9 04:50:00 2012] rmf not generated due to insufficient counts
[Fri Mar  9 05:25:51 2012] Updating aperture counts using extracted products
[Fri Mar  9 05:25:51 2012] Error reading totcts from fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Fri Mar  9 05:25:54 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar  9 05:25:54 2012] Using photon index=1.80, rate=0.00839, arf fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src46.arf
[Fri Mar  9 05:25:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar  9 05:25:54 2012] Updating source flux to 1.3e-13
[Fri Mar  9 05:30:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting